Study on Adhesion Properties and Process Parameters of Electroless Deposited Ni-P Alloy for PEEK and Its Modified Materials

Polyetheretherketone (PEEK) and its fiber-reinforced materials are thermoplastic polymer materials with broad application prospects. Depositing Ni-P alloy on them can improve their poor conductivity and electromagnetic shielding performance, and further expand their application field. The application effect of the plated parts is significantly impacted by the bonding strength between PEEK and coating. The bonding strength between non-metallic substrate and coating is largely influenced by the surface characteristics of the substrate. Therefore, it is significant to study how the surface roughness of PEEK materials and the modified fibers in materials affect the adhesion of the coating. In this study, Ni-P alloy was electroless deposited on PEEK, 30% carbon-fiber-reinforced PEEK (CF30/PEEK), and 30% glass-fiber-reinforced PEEK (GF30/PEEK) with varying surface roughness. The influence of surface roughness and modified fibers on the coating adhesion was studied. Additionally, the effect of the concentrations of nickel sulfate, sodium hypophosphite, pH, and temperature on the deposition rate of the coating was investigated for the three materials. Based on the highest deposition rate, the process parameters were then optimized. The results demonstrated that as surface roughness increased, adhesion between substrate and coating first increased and then decreased. The surface roughness Ra of 0.4 μm produced the highest coating adhesion. Additionally, fiber-reinforced PEEK adhered to coatings more effectively than PEEK did. The mechanism of the difference in bonding strength between different PEEK-modified materials and coatings was revealed. The optimal process parameters were: nickel sulfate: 25 g/L, sodium hypophosphite: 30 g/L, pH: 5.0, and temperature: 70 °C.

[1]  V. Vitry,et al.  RSM models approach for optimization of the mechanical properties of electroless Ni-B-nanodiamond coating: An experimental and molecular dynamic simulation study , 2022, Surface and Coatings Technology.

[2]  L. Bonin,et al.  Recent advances in electroless nickel‑boron coatings , 2021, Surface and Coatings Technology.

[3]  R. T. Olsson,et al.  Experimental review of PEI electrodeposition onto copper substrates for insulation of complex geometries , 2021, RSC advances.

[4]  E. Yakovlev,et al.  Adhesive Strength of Ni–Cu Surface Alloy Formation by Low-Energy High-Current Electron Beam , 2021 .

[5]  Chen Siyu,et al.  Polyether Ether Ketone (PEEK) Properties and Its Application Status , 2020 .

[6]  L. Bonin,et al.  Effect of temperature on ultrasound-assisted electroless nickel-boron plating. , 2019, Ultrasonics sonochemistry.

[7]  S. Wöhlert,et al.  Scratch induced thin film buckling for quantitative adhesion measurements , 2018, Materials & Design.

[8]  B. Kandasubramanian,et al.  The Importance of Electroless Metallic Build-Up on Surface Modified Substrates for Multifunctional Engineering Applications: A Recent Progress Update , 2018, Transactions of the Indian Institute of Metals.

[9]  Zhongxiao Peng,et al.  Fretting Wear Study of PEEK-Based Composites for Bio-implant Application , 2017, Tribology Letters.

[10]  Nguyen Quoc Hung,et al.  Selected-area growth of nickel micropillars on aluminum thin films by electroless plating for applications in microbolometers , 2017 .

[11]  M. Duke,et al.  Investigation of electroless nickel plating on rapid prototyping material of acrylic resin , 2016 .

[12]  G. Rajagopal,et al.  Wear and scratch behaviour of electroless Ni-P-nano-TiO2: Effect of surfactants , 2016 .

[13]  J. Lian,et al.  Electromagnetic shielding and corrosion resistance of electroless Ni‐P and Ni‐P‐Cu coatings on polymer/carbon fiber composites , 2015 .

[14]  Bobji,et al.  Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces , 2014 .

[15]  K. Akamatsu,et al.  Electroless nickel plating on polymer particles. , 2014, Journal of colloid and interface science.

[16]  K. Kusukawa,et al.  Adhesion Assessment of BNT Films on Titanium Substrates Using a Scratch Test , 2014 .

[17]  C. Yuen,et al.  Optimization of electroless nickel plating on polyester fabric , 2013, Fibers and Polymers.

[18]  Jie Deng,et al.  Regulation Based on the Carrying Capacity of the Water Environment and Water Quality Information System Model Research , 2012 .

[19]  Wen Liu,et al.  Fabrication of Nano-Al2O3/Ni Composite Particle with Core-Shell Structure by a Modified Electroless Plating Process , 2012 .

[20]  Y. Wu,et al.  Microwave Assisted Eletroless Copper Plating on Carbon Nanotubes , 2011 .

[21]  Jun Duo,et al.  Effect on Electroless Nickel Coating on Magnesium Alloy by Nickel Electroless Plating Parameters , 2011 .

[22]  Takeshi Akamatsu,et al.  Effect of Ground Surface Roughness of Tool on Adhesion Characteristics of PVD Coating , 2010 .

[23]  J. Davim,et al.  Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding , 2009 .

[24]  C. Yuen,et al.  Electroless Nickel Plating of Polyester Fiber , 2008 .

[25]  U. Wiklund,et al.  The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel , 2008 .

[26]  M. Gilbert,et al.  Evaluation of non-stick properties of magnetron-sputtered coatings for moulds used for the processing of polymers , 2006 .

[27]  S. Arnórsson,et al.  Redox reactions and potentials in natural waters at disequilibrium , 2005 .

[28]  G. Zangari,et al.  Study of the Electroless Deposition Process of Ni-P-Based Ternary Alloys , 2003 .

[29]  F. R. Foulkes,et al.  Application of vapor-deposited carbon and zinc as a substitute for palladium catalyst in the electroless plating of nickel , 2003 .

[30]  Yuanyuan Li,et al.  Cellulose-assisted electrodeposition of zinc for morphological control in battery metal recycling , 2022, Materials Advances.

[31]  Gu Yi.  Study on New Surface Modification Method of ABS before Electroless Nickel Plating , 2008 .