Plasticity and Damage in Aluminum Syntactic Foams Deformed under Dynamic and Quasi-Static Conditions

[1]  Graham R. Davis,et al.  High definition X-ray microtomography using a conventional impact X-ray source , 2003 .

[2]  A. Mortensen,et al.  Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum , 2002 .

[3]  Robert F. Singer,et al.  The investigation of morphometric parameters of aluminium foams using micro-computed tomography , 2002 .

[4]  Feng Yi,et al.  Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams , 2001 .

[5]  A. Mortensen,et al.  Deformation of open-cell aluminum foam , 2001 .

[6]  Kishore,et al.  Studies on compressive failure features in syntactic foam material , 2001 .

[7]  T. W. Clyne,et al.  The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams , 2001 .

[8]  D. Sun,et al.  A NOVEL SINTERING-DISSOLUTION PROCESS FOR MANUFACTURING Al FOAMS , 2001 .

[9]  James Lankford,et al.  High strain rate compression of closed-cell aluminium foams , 2000 .

[10]  S. Nutt,et al.  PM synthesis and properties of steel foams , 2000 .

[11]  Mustafa Güden,et al.  Crushing of aluminum closed cell foams: density and strain rate effects , 2000 .

[12]  Akira Kitahara,et al.  ALPORAS Aluminum Foam: Production Process, Properties, and Applications , 2000 .

[13]  N. Fleck,et al.  High strain rate compressive behaviour of aluminium alloy foams , 2000 .

[14]  Hilary Bart-Smith,et al.  Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam , 2000 .

[15]  H. Kohzu,et al.  Enhancement of energy absorption in a closed-cell aluminum by the modification of cellular structures , 1999 .

[16]  Frank W. Zok,et al.  The mechanical response of ceramic microballoon reinforced aluminum matrix composites under compressive loading , 1999 .

[17]  Mamoru Mabuchi,et al.  Experimental study of energy absorption in a close-celled aluminum foam under dynamic loading , 1999 .

[18]  M. Güden,et al.  High strain rate properties of an SiCW/2124-T6 aluminum composite at elevated temperatures , 1998 .

[19]  Hilary Bart-Smith,et al.  Compressive deformation and yielding mechanisms in cellular Al alloys determined using X-ray tomography and surface strain mapping , 1998 .

[20]  P. Rohatgi,et al.  Chemical reactions between aluminum and fly ash during synthesis and reheating of Al-fly ash composite , 1998 .

[21]  P. Rohatgi,et al.  Pressure infiltration technique for synthesis of aluminum–fly ash particulate composite , 1998 .

[22]  F. Han,et al.  Compressive deformation and energy absorbing characteristic of foamed aluminum , 1998 .

[23]  J. Mottram,et al.  Manufacture and compression properties of syntactic foams , 1993 .

[24]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[25]  Merton C. Flemings,et al.  Solidification processing of metal-matrix composites , 1988 .

[26]  J. Hatch,et al.  Aluminum: Properties and Physical Metallurgy , 1984 .

[27]  W. Whitten.  Composites , 1977, Science.

[28]  W. Eccleston,et al.  Mater. Res. Soc. Symp. Proc. , 2006 .

[29]  P. Cloetens,et al.  X-ray micro-tomography an attractive characterisation technique in materials science , 2003 .

[30]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[31]  Sia Nemat-Nasser,et al.  Determination of temperature rise during high strain rate deformation , 1998 .

[32]  Robert F. Singer,et al.  Fabrication and Properties of Syntactic Magnesium Foams , 1998 .

[33]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[34]  J. R. Klepaczko,et al.  A unified analytic and numerical approach to specimen behaviour in the Split-Hopkinson pressure bar , 1986 .

[35]  F. Shutov.  Syntactic polymer foams , 1986 .