Progressive Failure Analysis Using Global-Local Coupling Including Intralaminar Failure and Debonding

Composite laminate stiffened panels are often used in aircraft fuselage design because of their favorable properties. To assess the failure load of these thin-walled structures and to exploit their...

[1]  R. Rolfes,et al.  Analysis of skin-stringer debonding in composite panels through a two-way global-local method , 2018, Composite Structures.

[2]  Raimund Rolfes,et al.  A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels , 2016 .

[3]  Shuguang Li,et al.  Mechanical properties and details of composite laminates for the test cases used in the third world-wide failure exercise , 2013 .

[4]  Pedro P. Camanho,et al.  Failure Models and Criteria for Frp Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity , 2013 .

[5]  Silvestre T. Pinho,et al.  Response and damage propagation of polymer-matrix fibre-reinforced composites: Predictions for WWFE-III Part A , 2013 .

[6]  As Kaddour,et al.  Maturity of 3D failure criteria for fibre-reinforced composites: Comparison between theories and experiments: Part B of WWFE-II , 2013 .

[7]  C. Bisagni,et al.  Failure analysis of composite multi-stringer panels using simplified models , 2013 .

[8]  R. Rolfes,et al.  A Loose Coupling Multiscale Approach for the Detailed Analysis of the Influence of Critical Areas on the Global Behaviour of Composite Structures , 2012 .

[9]  Antonio Blázquez,et al.  Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces , 2012 .

[10]  G. N. Labeas,et al.  Adaptative Progressive Damage Modeling for Large-scale Composite Structures , 2012 .

[11]  Rodney S. Thomson,et al.  Damage sensitivity of axially loaded stringer-stiffened curved CFRP panels , 2010 .

[12]  O. Allix,et al.  Non-intrusive and exact global/local techniques for structural problems with local plasticity , 2009 .

[13]  Javid Bayandor,et al.  Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels , 2008 .

[14]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .

[15]  W. Wagner,et al.  Simulation of delamination in stringer stiffened fiber-reinforced composite shells , 2008 .

[16]  Brian Falzon,et al.  Optimization strategy for minimizing damage in postbuckling stiffened panels , 2007 .

[17]  Ted Belytschko,et al.  A multiscale projection method for macro/microcrack simulations , 2007 .

[18]  Pedro P. Camanho,et al.  An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .

[19]  Richard Degenhardt,et al.  EXPERIMENTS ON BUCKLING AND POSTBUCKLING OF THIN-WALLED CFRP STRUCTURES USING ADVANCED MEASUREMENT SYSTEMS , 2007 .

[20]  Rolf Zimmermann,et al.  Buckling and postbuckling of stringer stiffened fibre composite curved panels – Tests and computations , 2006 .

[21]  P. D. Soden,et al.  A comparison of the predictive capabilities of current failure theories for composite laminates: additional contributions , 2004 .

[22]  P. D. Soden,et al.  A COMPARISON OF THE PREDICTIVE CAPABILITIES OF CURRENT FAILURE THEORIES FOR COMPOSITE LAMINATES, JUDGED AGAINST EXPERIMENTAL EVIDENCE , 2002 .

[23]  Raimund Rolfes,et al.  Efficient progressive failure analysis of multi-stringer stiffened composite panels through a two-way loose coupling global-local approach , 2018 .

[24]  Reza Vaziri,et al.  An overview of continuum damage models used to simulate intralaminar failure mechanisms in advanced composite materials , 2015 .

[25]  Venkata M. K. Akula,et al.  Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites , 2009 .

[26]  Richard Degenhardt,et al.  Degradation investigation in a postbuckling composite stiffened fuselage panel , 2008 .

[27]  Peter Linde,et al.  Modelling and Simulation of Fibre Metal Laminates , 2004 .

[28]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .