The impact of highly reflective ceilings on wireless systems in occupied open plan offices

Improving the reliability and coverage of indoor wireless systems is an important design goal. A highly reflective ceiling creates an elevated image of the access point, which delivers a strong and reliable multipath component to the mobile terminal. Measurement results show that a small area of metallic ceiling above the transmitter can provide significant enhancement to the received signal power across a large room. Experiments with human bodies obstructing the line-of-sight path were performed to further examine the effectiveness of such an architectural modification. The improvement can be as high as 6.5 dB in cases where the line-of-sight path is obstructed by a human body. Moreover, the effectiveness of the metallic ceiling does not diminish with the distance from the transmitter. A comparison of measured and simulated results shows that ray tracing simulation can adequately approximate the results observed by measurement at 5.8 GHz.

[1]  Tapan K. Sarkar,et al.  Time-domain measurements with the Hewlett-Packard network analyzer HP 8510 using the matrix pencil method , 1991 .

[2]  W. G. Scanlon,et al.  Pedestrian-induced fading for indoor channels at 2.45, 5.7 and 62 GHz , 2000, Vehicular Technology Conference Fall 2000. IEEE VTS Fall VTC2000. 52nd Vehicular Technology Conference (Cat. No.00CH37152).

[3]  R.L. Hamilton,et al.  Ray tracing as a design tool for radio networks , 1991, IEEE Network.

[4]  D.C.K. Lee,et al.  Extracting fine multipath detail from measured data at 5.8 GHz , 2004, 2004 IEEE 59th Vehicular Technology Conference. VTC 2004-Spring (IEEE Cat. No.04CH37514).

[5]  J. P. McGeehan,et al.  Indoor 3D ray tracing predictions and their comparison with high resolution wideband measurements , 1996, Proceedings of Vehicular Technology Conference - VTC.