论文信息 - A new single-phase sag compensator intended for transformer-coupled loads

A new single-phase sag compensator intended for transformer-coupled loads

In this paper we propose a new single-phase sag compensator intended for transformer-coupled loads that integrates a current-controlled inverter in parallel with the secondary winding of an isolation transformer. Compared with conventional single-phase series-voltage sag compensators that produce a high inrush current during the starting of the compensation process, the proposed sag compensator eliminates the inrush current and achieves seamless compensation for the load current. The performance of the proposed sag compensator is validated by our experimental results for a small prototype.

Syed Sabir Hussain Bukhari | Byung-il Kwon

[1] Syed Sabir Hussain Bukhari,et al. Elimination of the Inrush Current Phenomenon Associated with Single-Phase Offline UPS Systems , 2016 .

[2] D. G. Holmes,et al. Optimized Design of Stationary Frame Three Phase AC Current Regulators , 2009, IEEE Transactions on Power Electronics.

[3] Yu Cui,et al. A sequential phase energization technique for transformer inrush current reduction - Part I: Simulation and experimental results , 2005 .

[4] D. G. Holmes,et al. Improved Stationary Frame AC Current Regulation using Feedforward Compensation of the Load EMF , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[6] Stella Morris,et al. Elimination of inrush current in parallel transformers by sequential phase energization , 2007, IEICE Electron. Express.

[7] S. J. Asghar. Elimination of inrush current of transformers and distribution lines , 1996, Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth.

[8] Muhamad Mansor,et al. New voltage sag detection based on phase angle analysis for the new topology of voltage sag compensator , 2010, IEICE Electron. Express.