Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications

In this paper, we demonstrate for the first time a novel hybrid superionic long gauge sensor for structural health monitoring applications. The sensor consists of two graphene electrodes and a superionic conductor film made entirely of fly ash geopolymeric material. The sensor employs ion hopping as a conduction mechanism for high precision temperature and tensile strain sensing in structures. The design, fabrication and characterization of the sensor are presented. The temperature and strain sensing mechanisms of the sensor are also discussed. The experimental results revealed that the crystal structure of the superionic film is a 3D sodium-poly(sialate-siloxo) (Na-PSS) framework, with a room temperature ionic conductivity between 1.54 x 10-2 and 1.72 x 10-2 S/m and, activation energy of 0.156 eV, which supports the notion that ion hopping is the main conduction mechanism for the sensor. The sensor showed high sensitivity to both temperature and tensile strain. The sensor exhibited temperature sensitivity as high as 21.5 kΩ/oC and tensile strain sensitivity (i.e.,gauge factor) as high as 358. The proposed sensor is relatively inexpensive and can easily be manufactured with long gauges to measure temperature and bulk strains in structures. With some further development and characterization, the sensor can be retrofitted onto existing structures such as bridges, buildings, pipelines and wind turbines to monitor their structural integrity.

[1]  Nemkumar Banthia,et al.  Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing , 2012 .

[2]  S. Ong,et al.  Design Principles for Solid‐State Lithium Superionic Conductors , 2015 .

[3]  Jing Zhao,et al.  Review of graphene-based strain sensors , 2013 .

[4]  Biao Li,et al.  Extended symmetry transformation of (3+1)-dimensional generalized nonlinear Schrödinger equation with variable coefficients , 2013 .

[5]  Yi-Lung Mo,et al.  Self-sensing of carbon nanofiber concrete columns subjected to reversed cyclic loading , 2011 .

[6]  C. Renner,et al.  Giant room-temperature piezoresistance in a metal-silicon hybrid structure. , 2008, Physical review letters.

[7]  Zhang Yunsheng,et al.  In situ observing the hydration process of K-PSS geopolymeric cement with environment scanning electron microscopy , 2007 .

[8]  Eil Kwon,et al.  A carbon nanotube/cement composite with piezoresistive properties , 2009 .

[9]  Shyue Ping Ong,et al.  Design and synthesis of the superionic conductor Na10SnP2S12 , 2016, Nature Communications.

[10]  Satish Nagarajaiah,et al.  Nanotube film based on single-wall carbon nanotubes for strain sensing , 2004 .

[11]  D.D.L. Chung,et al.  Improving the strain-sensing ability of carbon fiber-reinforced cement by ozone treatment of the fibers , 1998 .

[12]  Liquan Chen,et al.  Candidate compounds with perovskite structure for high lithium ionic conductivity , 1994 .

[13]  Hong Li,et al.  High-throughput design and optimization of fast lithium ion conductors by the combination of bond-valence method and density functional theory , 2015, Scientific Reports.

[14]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[15]  Halil Ceylan,et al.  Novel nanocomposite technologies for dynamic monitoring of structures: a comparison between cement-based embeddable and soft elastomeric surface sensors , 2014 .

[16]  O. Kayali,et al.  A mix design procedure for low calcium alkali activated fly ash-based concretes , 2015 .