An improved boundary distributed source method for electrical resistance tomography forward problem

Abstract This paper presents a meshless method called the improved boundary distributed source (IBDS) method to obtain the numerical solution of an electrical resistance tomography (ERT) forward problem. The ERT forward problem contains solving the Laplace equation on piece-wise homogeneous domain subjected to the mixed boundary conditions with constraints of integral form. The IBDS method is mesh-free and does not require a fictitious boundary for source points as in the case of a conventional method of fundamental solution (MFS) approach. Therefore, it can be used for a wide variety of applications involving complex shaped objects that are difficult to mesh. Also, in the IBDS method, the diagonal elements for Neumann boundary conditions are computed analytically unlike the original BDS method. Therefore, the IBDS method is computationally efficient and stable compared to the BDS method. The ERT forward problem to compute the boundary voltages is formulated using a meshless IBDS method. Several numerical examples are tested to demonstrate the feasibility and accuracy of the new formulation. The results are compared with that of standard numerical forward solvers for ERT such as the boundary element method (BEM) and the finite element method (FEM).

[1]  YuanTong Gu,et al.  Meshless methods coupled with other numerical methods , 2005 .

[2]  Božidar Šarler,et al.  Solution of potential flow problems by the modified method of fundamental solutions: Formulations with the single layer and the double layer fundamental solutions , 2009 .

[3]  Anil Kumar Khambampati,et al.  An analytical boundary element integral approach to track the boundary of a moving cavity using electrical impedance tomography , 2012 .

[4]  Liliana Borcea,et al.  Electrical impedance tomography , 2002 .

[5]  B. Šarler,et al.  Non-Singular Method of Fundamental Solutions forTwo-Dimensional Isotropic Elasticity Problems , 2013 .

[6]  Sin-Bom Kim.  An improved boundary distributed source method for two-dimensional Laplace equations , 2013 .

[7]  D. L. Young,et al.  Novel meshless method for solving the potential problems with arbitrary domain , 2005 .

[8]  Amin Barari,et al.  Numerical simulation of electric field in complex geometries for different electrode arrangements using meshless local MQ-DQ method , 2011 .

[9]  R. Mathon,et al.  The Approximate Solution of Elliptic Boundary-Value Problems by Fundamental Solutions , 1977 .

[10]  Mark A Fleming,et al.  Meshless methods: An overview and recent developments , 1996 .

[11]  Feng Dong,et al.  Electrical resistance tomography for locating inclusions using analytical boundary element integrals and their partial derivatives , 2010 .

[12]  Martin Hanke,et al.  Recent progress in electrical impedance tomography , 2003 .

[13]  Analytical integration of elliptic 2D fundamental solution and its derivatives for straight-line elements with constant interpolation , 1999 .

[14]  Wen Chen,et al.  A method of fundamental solutions without fictitious boundary , 2010 .

[15]  Ramani Duraiswami,et al.  Boundary element techniques for efficient 2-D and 3-D electrical impedance tomography , 1997 .

[16]  David K. Han,et al.  Regular Article: A Shape Decomposition Technique in Electrical Impedance Tomography , 1999 .

[17]  An Improved Formulation of Singular Boundary Method , 2012 .

[18]  D. Isaacson,et al.  Electrode models for electric current computed tomography , 1989, IEEE Transactions on Biomedical Engineering.

[19]  William R B Lionheart,et al.  Validation of a finite-element solution for electrical impedance tomography in an anisotropic medium , 2007, Physiological measurement.

[20]  Robert G. Aykroyd,et al.  A boundary-element approach for the complete-electrode model of EIT illustrated using simulated and real data , 2007 .

[21]  K. Y. Kim,et al.  An oppositional biogeography-based optimization technique to reconstruct organ boundaries in the human thorax using electrical impedance tomography , 2011, Physiological measurement.

[22]  Simon R. Arridge,et al.  RECOVERY OF REGION BOUNDARIES OF PIECEWISE CONSTANT COEFFICIENTS OF AN ELLIPTIC PDE FROM BOUNDARY DATA , 1999 .

[23]  B. Šarler,et al.  Calculating transport of water from a conduit to the porous matrix by boundary distributed source method , 2012 .

[24]  Xiaoqiao He,et al.  Singular boundary method for steady-state heat conduction in three dimensional general anisotropic media , 2012 .

[25]  Jan C. de Munck,et al.  The boundary element method in the forward and inverse problem of electrical impedance tomography , 2000, IEEE Transactions on Biomedical Engineering.

[26]  Yan Gu,et al.  Investigation on near-boundary solutions by singular boundary method , 2012 .

[27]  T. Savolainen,et al.  Estimating shapes and free surfaces with electrical impedance tomography , 2004 .

[28]  Subrata Mukherjee,et al.  Boundary element methods in creep and fracture , 1982 .

[29]  E. Somersalo,et al.  Existence and uniqueness for electrode models for electric current computed tomography , 1992 .

[30]  Anil Kumar Khambampati,et al.  An EM algorithm for dynamic estimation of interfacial boundary in stratified flow of immiscible liquids using EIT , 2011 .

[31]  S. Kim,et al.  Dynamic inverse obstacle problems with electrical impedance tomography , 2004, Math. Comput. Simul..

[32]  Yijun Liu,et al.  A new boundary meshfree method with distributed sources , 2010 .

[33]  John G. Webster,et al.  Electrical Impedance Tomography , 1991 .

[34]  Gunther Uhlmann,et al.  Electrical impedance tomography and Calderón's problem , 2009 .

[35]  Harri Hakula,et al.  On the hp-adaptive solution of complete electrode model forward problems of electrical impedance tomography , 2012, J. Comput. Appl. Math..

[36]  D. L. Young,et al.  Regularized meshless method for multiply-connected-domain Laplace problems , 2006 .

[37]  K. M. Liew,et al.  Improved element-free Galerkin method for two-dimensional potential problems , 2009 .