A solutal interaction mechanism for the columnar-to-equiaxed transition in alloy solidification

A multiphase/multiscale model is used to predict the columnar-to-equiaxed transition (CET) during solidification of binary alloys. The model consists of averaged energy and species conservation equations, coupled with nucleation and growth laws for dendritic structures. A new mechanism for the CET is proposed based on solutal interactions between the equiaxed grains and the advancing columnar front—as opposed to the commonly used mechanical blocking criterion. The resulting differences in the CET prediction are demonstrated for cases where a steady state can be assumed, and a revised isotherm velocity (VT) vs temperature gradient (G) map for the CET is presented. The model is validated by predicting the CET in previously performed unsteady, unidirectional solidification experiments involving Al-Si alloys of three different compositions. Good agreement is obtained between measured and predicted cooling curves. A parametric study is performed to investigate the dependence of the CET position on the nucleation undercooling and the density of nuclei in the equiaxed zone. Nucleation undercoolings are determined that provide the best agreement between measured and calculated CET positions. It is found that for all three alloy compositions, the nucleation undercoolings are very close to the maximum columnar dendrite tip undercoolings, indicating that the origin of the equiaxed grains may not be heterogeneous nucleation, but rather a breakdown or fragmentation of the columnar dendrites.

[1]  J. A. Spittle,et al.  A computer simulation of the influence of processing conditions on as-cast grain structures , 1989 .

[2]  C. Gandin,et al.  A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes , 1994 .

[3]  C. Gandin.  FROM CONSTRAINED TO UNCONSTRAINED GROWTH DURING DIRECTIONAL SOLIDIFICATION , 2000 .

[4]  J. Hunt,et al.  Columnar and equiaxed growth: I. A model of a columnar front with a temperature dependent velocity , 1987 .

[5]  C. Gandin,et al.  Experimental Study of the Transition from Constrained to Unconstrained Growth during Directional Solidification , 2000 .

[6]  W. Kurz,et al.  SINGLE-CRYSTAL LASER DEPOSITION OF SUPERALLOYS: PROCESSING-MICROSTRUCTURE MAPS , 2001 .

[7]  Christoph Beckermann,et al.  Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification , 1994 .

[8]  C. Gandin,et al.  A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures , 1999 .

[9]  Marcelo de Aquino Martorano,et al.  Heat transfer coefficient at the metal–mould interface in the unidirectional solidification of Cu–8%Sn alloys , 2000 .

[10]  R. Grugel,et al.  The transition from columnar to equiaxed dendritic growth in proeutectic, low-volume fraction copper, Pb−Cu alloys , 1992 .

[11]  Martin E. Glicksman,et al.  Dendritic growth into undercooled alloy metals , 1984 .

[12]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[13]  J. Hunt,et al.  Steady state columnar and equiaxed growth of dendrites and eutectic , 1984 .

[14]  F. Weinberg,et al.  The columnar-to-equiaxed transition in Al 3 Pct Cu , 1989 .

[15]  N. Cheung,et al.  Solidification thermal parameters affecting the columnar-to-equiaxed transition , 2002 .

[16]  Chaoyang Wang,et al.  A multiphase solute diffusion model for dendritic alloy solidification , 1993, Metallurgical and Materials Transactions A.

[17]  S. C. Flood,et al.  Columnar and equiaxed growth: II. Equiaxed growth ahead of a columnar front , 1987 .

[18]  R. Smith,et al.  Dynamic simulation of crystal growth by Monte Carlo method—I. Model description and kinetics , 1992 .

[19]  Wilfried Kurz,et al.  Columnar to equiaxed transition in solidification processing , 2001 .

[20]  A. Ares,et al.  Solidification parameters during the columnar-to-equiaxed transition in lead-tin alloys , 2000 .

[21]  R. Mahapatra,et al.  The columnar to equiaxed transition in tin-lead alloys , 1987 .

[22]  A. L. Greer,et al.  Application of cellular automaton–finite element model to the grain refinement of directionally solidified Al–4.15 wt% Mg alloys , 2002 .

[23]  Dendrite structure control in directionally solidified bronze castings , 2000 .