Characterization of Pd–Cu–Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow on porous nickel support for hydrogen separation

[1]  S. H. Kim,et al.  Fabrication and characterization of metal porous membrane made of Ni powder for hydrogen separation , 2006 .

[2]  Hiroyuki Suda,et al.  Thin and dense Pd/CeO2/MPSS composite membrane for hydrogen separation and steam reforming of methane , 2005 .

[3]  R. Hughes,et al.  The effect of diffusion direction on the permeation rate of hydrogen in palladium composite membranes , 2005 .

[4]  J. Tong,et al.  A novel method for the preparation of thin dense Pd membrane on macroporous stainless steel tube filter , 2005 .

[5]  N. Itoh,et al.  Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity , 2005 .

[6]  Dong‐Won Kim,et al.  A Pd–Cu–Ni Ternary Alloyed Membrane on Porous Nickel Support Prepared by Sputtering and Copper Reflow , 2005 .

[7]  C. Nishimura,et al.  Morphological study of supported thin Pd and Pd–25Ag membranes upon hydrogen permeation , 2005 .

[8]  R. P. Killmeyer,et al.  High pressure hydrogen permeance of porous stainless steel coated with a thin palladium film via electroless plating , 2004 .

[9]  B. Morreale,et al.  Effect of hydrogen-sulfide on the hydrogen permeance of palladium–copper alloys at elevated temperatures , 2004 .

[10]  J. Tong,et al.  Preparation of palladium membrane over porous stainless steel tube modified with zirconium oxide , 2004 .

[11]  T. Flanagan,et al.  Permeation of hydrogen through pre-oxidized Pd membranes in the presence and absence of CO , 2004 .

[12]  A. Miotello,et al.  Palladium membranes prepared by r.f. magnetron sputtering for hydrogen purification , 2004 .

[13]  Michael Curt Elwenspoek,et al.  Fabrication and characterization of dual sputtered Pd-Cu alloy films for hydrogen separation membranes , 2004 .

[14]  S. Tosti.  Supported and laminated Pd-based metallic membranes , 2003 .

[15]  H. Brunner,et al.  Pd/ceramic hollow fibers for H2 separation , 2003 .

[16]  G. Lu,et al.  Preparation and characterization of Pd–Ag/ceramic composite membrane and application to enhancement of catalytic dehydrogenation of isobutane , 2003 .

[17]  R. Hughes,et al.  Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation , 2003 .

[18]  Y. Ma,et al.  Dependence of hydrogen flux on the pore size and plating surface topology of asymmetric Pd-porous stainless steel membranes , 2002 .

[19]  Jtf Jos Keurentjes,et al.  High-flux palladium-silver alloy membranes fabricated by microsystem technology , 2002 .

[20]  Jackie Y. Ying,et al.  Nanostructured palladium–iron membranes for hydrogen separation and membrane hydrogenation reactions , 2002 .

[21]  Francesca Sarto,et al.  Sputtered, electroless, and rolled palladium–ceramic membranes , 2002 .

[22]  L. Lorenzen,et al.  Developing a heating procedure to optimise hydrogen permeance through Pd-Ag membranes of thickness less than 2.2 μm , 2002 .

[23]  Lars-Gunnar Ekedahl,et al.  Hydrogen permeation through surface modified Pd and PdAg membranes , 2001 .

[24]  Roland Dittmeyer,et al.  Membrane reactors for hydrogenation and dehydrogenation processes based on supported palladium , 2001 .

[25]  R. Hughes,et al.  Pd/Ag membranes on porous alumina substrates by unbalanced magnetron sputtering , 2001 .

[26]  N. Itoh,et al.  Deposition of palladium inside straight mesopores of anodic alumina tube and its hydrogen permeability , 2000 .

[27]  Suttichai Assabumrungrat,et al.  The effect of direction of hydrogen permeation on the rate through a composite palladium membrane , 2000 .

[28]  Hongbin Zhao,et al.  Preparation and characterization of palladium-based composite membranes by electroless plating and magnetron sputtering , 2000 .

[29]  J. Luyten,et al.  Membrane performance: the key issues for dehydrogenation reactions in a catalytic membrane reactor , 2000 .

[30]  R. Hughes,et al.  Fabrication of defect-free Pd/α-Al2O3 composite membranes for hydrogen separation , 1999 .

[31]  Y. S. Lin,et al.  Composition control and hydrogen permeation characteristics of sputter deposited palladium–silver membranes , 1999 .

[32]  A. Varma,et al.  Palladium composite membranes by electroless plating technique: Relationships between plating kinetics, film microstructure and membrane performance , 1999 .

[33]  King Lun Yeung,et al.  Palladium-silver composite membranes by electroless plating technique , 1999 .

[34]  Dong‐Won Kim,et al.  Reflow of copper in an oxygen ambient , 1998 .

[35]  Yuehe Lin,et al.  Fabrication of thin metallic membranes by MOCVD and sputtering , 1997 .

[36]  Y. S. Lin,et al.  Fabrication of a Thin Palladium Membrane Supported in a Porous Ceramic Substrate by Chemical-Vapor-Deposition , 1996 .

[37]  J. Ying,et al.  Nanostructured palladium membrane synthesis by magnetron sputtering , 1995 .

[38]  Yuehe Lin,et al.  Synthesis and hydrogen permeation properties of ultrathin palladium-silver alloy membranes , 1995 .

[39]  Y. S. Lin,et al.  Fabrication of ultrathin metallic membranes on ceramic supports by sputter deposition , 1995 .

[40]  A. B. Zakharov,et al.  Alloys of palladium with metals of the platinum group as hydrogen-permeable membrane components at high temperatures of gas separation , 1993 .