Optimal operation of distribution networks

The objective of the analysis presented is to outline and validate a methodology for the optimization of MV distribution network operation. Loss minimization, taking into account the protective scheme applied, reliability and voltage quality aspects, are attained. Loss minimization is achieved by the installation of shunt capacitors and reconfiguration of the network. Two different reconfiguration methods are applied and compared. Special attention is given to the impact of network reconfiguration on the protective scheme applied, as well as on network voltage quality and reliability. Loads are assumed to be time variable, following typical daily curves. A general optimization method, suitable for overhead and underground networks, is outlined and validated through applications.

[1]  R.P. Broadwater,et al.  Computer-Aided Protection System Design with Reconfiguration , 1991, IEEE Power Engineering Review.

[2]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part III: The Numerical Results , 1985, IEEE Transactions on Power Apparatus and Systems.

[3]  J. J. Grainger,et al.  Distribution feeder reconfiguration for loss reduction , 1988 .

[4]  Y.-Y. Hsu,et al.  Planning of distribution feeder reconfiguration with protective device coordination , 1993 .

[5]  Nikos D. Hatziargyriou,et al.  Distribution network reconfiguration to minimize resistive line losses , 1993 .

[6]  D. Shirmohammadi,et al.  A compensation-based power flow method for weakly meshed distribution and transmission networks , 1988 .

[7]  N. D. Hatziargyriou,et al.  Graphics Aided Interactive Analysis of Radial Distribution Networks , 1987, IEEE Transactions on Power Delivery.

[8]  D. Shirmohammadi Service restoration in distribution networks via network reconfiguration , 1991 .

[9]  S. Civanlar,et al.  Volt/Var Control on Distribution Systems with Lateral Branches Using Shunt Capacitors and Voltage Regulators Part I: The Overall Problem , 1985, IEEE Transactions on Power Apparatus and Systems.

[10]  D. Shirmohammadi,et al.  Reconfiguration of electric distribution networks for resistive line losses reduction , 1989 .

[11]  Hernando Dura,et al.  Optimum Number, Location, and Size of Shunt Capacitors in Radial Distribution Feeders A Dynamic Programming Approach , 1968 .

[12]  Richard Miller,et al.  Distribution System Integrated Voltage and Reactive Power Control , 1982, IEEE Transactions on Power Apparatus and Systems.