Hip-mounted electromagnetic generator to harvest energy from human motion

A type of electromagnetic hip-mounted generator (EHG) is proposed to harvest energy from human hip motion to generate electricity. Based on the law of electromagnetic induction, the EHG generator can convert the kinetic power of the thigh swing into electrical energy during walking or running. To demonstrate the feasibility of the present method, a prototype of the EHG has been designed and fabricated. A theoretical analysis has been conducted to interpret the working behavior of this prototype. In addition, the performance of the system has been experimentally tested through a rotary motor and human body motion. When driven by the rotary motor at a rotation speed of 100 r/min, the open-circuit voltage of this prototype is 2.5 V. Further, a maximum open-circuit voltage of approximately 1 V and a maximum output power of 284 μW could be produced respectively when walking with an EHG at a speed of 1.47 m/s. This handy renewable energy technology is promising as a pervasive electricity generation system for a group of wearable or implanted sensors, actuators and mobile electronics.

[1]  J A Hoffer,et al.  Biomechanical Energy Harvesting: Generating Electricity During Walking with Minimal User Effort , 2008, Science.

[2]  Andy Ruina,et al.  Energetic Consequences of Walking Like an Inverted Pendulum: Step-to-Step Transitions , 2005, Exercise and sport sciences reviews.

[3]  Ping Li,et al.  Magnetoelectric transducer with high quality factor for wireless power receiving , 2009 .

[4]  Robert Puers,et al.  Fabrication, modelling and characterization of MEMS piezoelectric vibration harvesters , 2008 .

[5]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[6]  M. Samet,et al.  Design of Wireless Power and Data Transmission Circuits for Implantable Biomicrosystem , 2007 .

[7]  Kati Kokko,et al.  Wireless and inductively powered implant for measuring electrocardiogram , 2007, Medical & Biological Engineering & Computing.

[8]  Krzysztof Zaraska,et al.  Piezoelectric polymer films as power converters for human powered electronics , 2008, Microelectron. Reliab..

[9]  Wentai Liu,et al.  Design and analysis of an adaptive transcutaneous power telemetry for biomedical implants , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[10]  Skandar Basrour,et al.  Integrated power harvesting system including a MEMS generator and a power management circuit , 2008 .

[11]  S. Priya Advances in energy harvesting using low profile piezoelectric transducers , 2007 .

[12]  Raul Morais,et al.  Double permanent magnet vibration power generator for smart hip prosthesis , 2011 .

[13]  S. Farritor,et al.  The use of piezoelectric ceramics for electric power generation within orthopedic implants , 2005, IEEE/ASME Transactions on Mechatronics.

[14]  Yong-Jae Kim,et al.  The Re-design at the Transformer Portion of Transcutaneous Energy Transmission System for All Implantable Devices , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[15]  Chitta Saha,et al.  Modeling and experimental investigation of an AA-sized electromagnetic generator for harvesting energy from human motion , 2008, Smart Materials and Structures.

[16]  Bo-Hyung Cho,et al.  An energy transmission system for an artificial heart using leakage inductance compensation of transcutaneous transformer , 1996 .

[17]  Lu Dong,et al.  Fabrication and performance of MEMS-based piezoelectric power generator for vibration energy harvesting , 2006, Microelectron. J..

[18]  P.R. Troyk,et al.  Closed-loop class E transcutaneous power and data link for MicroImplants , 1992, IEEE Transactions on Biomedical Engineering.

[19]  Shadrach Roundy,et al.  On the Effectiveness of Vibration-based Energy Harvesting , 2005 .

[20]  J. Donelan,et al.  Mechanical work for step-to-step transitions is a major determinant of the metabolic cost of human walking. , 2002, The Journal of experimental biology.

[21]  Mauro Serpelloni,et al.  An efficient electromagnetic power harvesting device for low-frequency applications , 2011 .

[22]  Rodger Kram,et al.  Simultaneous positive and negative external mechanical work in human walking. , 2002, Journal of biomechanics.

[23]  Thad Starner,et al.  Human-Powered Wearable Computing , 1996, IBM Syst. J..

[24]  Mauro Serpelloni,et al.  Design and test of an autonomous sensor for force measurements in human knee implants , 2011 .

[25]  Adrien Badel,et al.  A comparison between several vibration-powered piezoelectric generators for standalone systems , 2006 .