A analytic coarse alignment method for SINS based on two-step recursive least squares

In order to reduce the coarse alignment time of strapdown inertial navigation system(SINS), an analytic initial coarse alignment method is proposed based on two-step recursive least squares estimation. The initial attitude matrix which represents the attitude and heading of SINS is estimated by two steps in the method. Firstly, some elements in the initial attitude matrix are estimated by an accelerometer measurement based on recursive least squares algorithm; secondly, the remainder elements in the initial attitude matrix are estimated by a gyro measurement and the estimated elements in the first step; and then, the system initial alignment is completed by solving the initial attitude matrix. Finally, tests for the proposed method are carried out under the different conditions of SINS, such as simulation, laboratory static and mooring on the sea. The results show that rapidity of the coarse alignment increases under the premise in alignment accuracy.

[1]  Zhong-yu Gao,et al.  Quaternion-Based Kalman Filter for Micro-machined Strapdown Attitude Heading Reference System , 2002 .

[2]  Jiang Cheng Fang,et al.  A fast initial alignment method for strapdown inertial navigation system on stationary base , 1996 .

[3]  K. S. P. Kumar,et al.  A 'current' statistical model and adaptive algorithm for estimating maneuvering targets , 1984 .

[4]  Donald L. South Fraser Journal of Guidance and Control Goals, Scope, and Issues , 1978 .

[5]  Dong Sun,et al.  A linear fusion algorithm for attitude determination using low cost MEMS-based sensors , 2007 .

[6]  Yoshifumi Sunahara,et al.  An approximate method of state estimation for nonlinear dynamical systems , 1969 .

[7]  Yoshifumi Sunahara,et al.  An approximate method of state estimation for nonlinear dynamical systems , 1970 .

[8]  Hugh F. Durrant-Whyte,et al.  A new method for the nonlinear transformation of means and covariances in filters and estimators , 2000, IEEE Trans. Autom. Control..

[9]  Zuo-sheng Yang Finite Element Method for the Transient Process of the Separation of External Stores from Aircraft , 2002 .

[10]  Yan Gong Initial Alignment Accuracy Analysis and Simulation of Strapdown Inertial Navigation System on a Stationary Base , 2006 .

[11]  Hugh F. Durrant-Whyte,et al.  Development of a nonlinear psi-angle model for large misalignment errors and its application in INS alignment and calibration , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[12]  B. M. Scherzinger Inertial navigator error models for large heading uncertainty , 1996, Proceedings of Position, Location and Navigation Symposium - PLANS '96.

[13]  Yanhua Zhang,et al.  Adaptive filter for a miniature MEMS based attitude and heading reference system , 2004, PLANS 2004. Position Location and Navigation Symposium (IEEE Cat. No.04CH37556).

[14]  O.A. Stepanov,et al.  Nonlinear filtering methods application in INS alignment , 1997, IEEE Transactions on Aerospace and Electronic Systems.

[15]  Zhang Ling Initial alignment method for rotational strapdown inertial navigation system based on strong tracking filter , 2010 .

[16]  Yeon Fuh Jung,et al.  Error Estimation of INS Ground Alignment Through Observability Analysis , 1992 .