A design method of a model-following control system

This paper describes and demonstrates a model-following control system that is based on a switching function where an optimal gain matrix is determined by the LQR method. In our proposed method, the optimal gain matrix is derived such that it does not depend on the plant parameters. Simulation results show various cases including the nominal plant and the plant with a modeling error. The experimental study is also performed using a DC motor. The simulation and experimental results show that the proposed method has superior effectiveness.

[1]  Dazhong Wang,et al.  Model following control system with robot system , 2010, 2010 2nd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2010).

[2]  S. Phanphairoje,et al.  A robust control structure enhancing nominal model following scheme for induction servomotor drive , 2004, SICE 2004 Annual Conference.

[3]  Akira Shimada.  Analysis of Estimation Error on Observer for Disturbance and Velocity , 1993 .

[4]  Dong xinmin,et al.  Gain scheduled model following control of flight control system based on neural network , 2003, International Conference on Neural Networks and Signal Processing, 2003. Proceedings of the 2003.

[5]  Katsuhisa Furuta,et al.  Design of model-following servo controller , 1982 .

[6]  Andras Varga,et al.  Balancing free square-root algorithm for computing singular perturbation approximations , 1991, [1991] Proceedings of the 30th IEEE Conference on Decision and Control.

[7]  B. Anderson,et al.  Optimal control: linear quadratic methods , 1990 .

[8]  Ming-Chang Pai,et al.  Observer-based adaptive sliding mode control for robust tracking and model following , 2013 .

[9]  T. Ishikawa,et al.  High-Precision Control of Linear Actuators Based on Internal Model Control , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[10]  Katsuhisa Furuta,et al.  Synthesis of Model Following Servo Controller for Multivariable Linear System , 1982 .

[11]  Ryo Tanaka,et al.  Controller design approach based on linear programming. , 2013, ISA transactions.

[12]  Gan-lin Shan,et al.  Model-following sliding mode controller design for flight control systems with wind disturbances , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[13]  Hiroyuki Kondo,et al.  Design of I-PD Controller Based on Integral-type Optimal Servomechanism , 2010 .

[14]  Yik-Chung Wu,et al.  Integral variable structure control approach for robot manipulators , 1992 .

[15]  George M. Siouris,et al.  An Engineering Approach to Optimal Control and Estimation Theory , 1996 .

[16]  Michael J. Grimble,et al.  Optimal Control and Stochastic Estimation: Theory and Applications , 1988 .

[17]  T. Chern,et al.  Design of integral variable structure controller and application to electrohydraulic velocity servosystems , 1991 .

[18]  Tzuen-Lih Chern,et al.  DSP-based integral variable structure model following control for brushless DC motor drivers , 1997 .

[19]  Van Valkenburg,et al.  Analog Filter Design , 1982 .

[20]  Jorge Davila,et al.  Output feedback trajectory stabilization of the uncertainty DC servomechanism system. , 2012, ISA transactions.