论文信息 - Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy - 字舞流文

Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy

Xiangfa Liu | Yuying Wu | Z. Qian | Yunguo Li

[1] Guohua Zhang,et al. Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al–Si piston alloy , 2008 .

[2] B. Ren,et al. Influences of Complex Modification of P and RE on Microstructure and Mechanical Properties of Hypereutectic Al-20Si Alloy , 2007 .

[3] Jian Li,et al. FIB and TEM characterization of subsurfaces of an Al–Si alloy (A390) subjected to sliding wear , 2006 .

[4] D. Eskin,et al. Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys , 2005 .

[5] X. Bian,et al. EPMA analysis of calcium-rich compounds in near eutectic Al–Si alloys , 2005 .

[6] J. M. Rodriguez-Ibabe,et al. Evolution of the main intermetallic phases in Al-Si-Cu-Mg casting alloys during solution treatment , 2004 .

[7] P. Reed,et al. Elevated temperature short crack fatigue behaviour in near eutectic Al–Si alloys , 2003 .

[8] Di Zhang,et al. Microstructures and La-rich compounds in a Cu-containing hypereutectic Al–Si alloy , 2003 .

[9] M. Haque,et al. Effect of process variables on structure and properties of aluminium–silicon piston alloy , 1998 .

[10] A. Sachdev,et al. Nucleation mechanism of the cubic σ phase in squeeze-cast aluminium matrix composites , 1994 .