Microstructure, texture and precipitate of grain-oriented 4.5 wt% Si steel by strip casting

[1]  Zhengyi Jiang,et al.  Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel , 2015 .

[2]  R. Misra,et al.  Effect of annealing after strip casting on texture development in grain oriented silicon steel produced by twin roll casting , 2015 .

[3]  F. Gao,et al.  Evolution of microstructure, texture and inhibitor along the processing route for grain-oriented electrical steels using strip casting , 2015 .

[4]  Zhen-Yu Liu,et al.  Microstructure, texture evolution and magnetic properties of strip-casting non-oriented 6.5 wt.% Si electrical steel doped with cerium , 2015 .

[5]  Hai‐Tao Liu,et al.  Development of microstructure and texture in strip casting grain oriented silicon steel , 2015 .

[6]  J. Butler,et al.  Effect of asymmetric hot rolling on texture, microstructure and magnetic properties in a non-grain oriented electrical steel , 2014 .

[7]  A. Knight,et al.  Effect of crystallographic texture on the bulk magnetic properties of non-oriented electrical steels , 2014 .

[8]  Jongryoul Kim,et al.  Influence of cooling rate on iron loss behavior in 6.5 wt% grain-oriented silicon steel , 2014 .

[9]  Zhen-Yu Liu,et al.  Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel , 2014 .

[10]  L. Kestens,et al.  Occurrence of shear bands in rotated Goss ({1 1 0}〈1 1 0〉) orientations of metals with bcc crystal structure , 2012 .

[11]  Hai‐Tao Liu,et al.  Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels , 2012 .

[12]  Hai‐Tao Liu,et al.  Microstructure, texture and magnetic properties of strip casting Fe–6.2 wt%Si steel sheet , 2012 .

[13]  N. Park,et al.  Evolution of Goss Orientation during Rapid Heating for Primary Recrystallization in Grain-oriented Electrical Steel , 2011 .

[14]  Zhen-Yu Liu,et al.  Solidification structure and crystallographic texture of strip casting 3wt.% Si non-oriented silicon steel , 2011 .

[15]  M. Lindenmo,et al.  Precipitates in electrical steels , 2008 .

[16]  Dierk Raabe,et al.  Texture measurement of grain-oriented electrical steels after secondary recrystallization , 2007 .

[17]  D. Raabe,et al.  Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal , 2007 .

[18]  Luc Dupré,et al.  The effect of Si and Al concentration gradients on the mechanical and magnetic properties of electrical steel , 2005 .

[19]  J. T. Park,et al.  Evolution of recrystallization texture in nonoriented electrical steels , 2003 .

[20]  M. Komatsubara,et al.  Newly developed electrical steel for high-frequency use , 2002 .

[21]  K. Oh,et al.  The Effects of Superheating on Texture and Microstructure of Fe–4.5wt%Si Steel Strip by Twin-roll Strip Casting , 2001 .

[22]  K. Oh,et al.  Microstructure and crystallographic texture of strip-cast 4.3wt%Si steel sheet , 1999 .

[23]  J. Szpunar,et al.  A new model of Goss texture development during secondary recrystallization of electrical steel , 1997 .

[24]  N. Takahashi,et al.  Recent developments in grain-oriented silicon-steel , 1996 .

[25]  T. Hiratani,et al.  Magnetic properties and workability of 6.5% Si steel sheet , 1996 .

[26]  Y. Ushigami,et al.  Magnetic properties of (110)[001] grain oriented 6.5% silicon steel , 1991 .

[27]  Munetsugu Matsuo,et al.  Texture Control in the Production of Grain Oriented Silicon Steels , 1989 .

[28]  K. Ushioda,et al.  Role of Shear Bands in Annealing Texture Formation in 3%Si–Fe(111)[112] Single Crystals , 1989 .

[29]  K. Arai,et al.  Annealing effect on grain texture of cold-rolled 4.5% Si-Fe ribbons prepared by a rapid quenching method , 1988 .

[30]  Y. Ito,et al.  Formation of the Goss orientation near the surface of 3 pct silicon steel during hot rolling , 1986 .

[31]  Martin F. Littman.  Grain-oriented silicon steel sheets , 1982 .

[32]  Tohru Iuchi,et al.  Laser processing for reducing core loss of grain oriented silicon steel , 1982 .

[33]  R. Miller,et al.  Sheet thickness effects on energy losses in 3% silicon-iron , 1980 .

[34]  A. Sakakura,et al.  New grain-oriented silicon steel with high permeability "ORIENTCORE HI-B" , 1974 .

[35]  G. Houzé.  Effect of Longitudinal Tensile Stress on the Static and 60 Hz Domain Structures of Grain‐Oriented Silicon Steel , 1969 .

[36]  R. C. Hall.  Single Crystal Anisotropy and Magnetostriction Constants of Several Ferromagnetic Materials Including Alloys of NiFe, SiFe, AlFe, CoNi, and CoFe , 1959 .