The synergic effect of polyethylene fibres and CNT on the properties of ultralightweight cementitious composites

[1]  M. Elchalakani,et al.  The influences of metakaolin, w/b ratio and fibers on the properties of green-HFLWC , 2022, Construction and Building Materials.

[2]  K. Khayat,et al.  Effect of carbon nanotube and graphite nanoplatelet on composition, structure, and nano-mechanical properties of C-S-H in UHPC , 2022, Cement and Concrete Research.

[3]  L. Natrayan,et al.  Experimental Testing on Mechanical, Durability, and Adsorption Dispersion Properties of Concrete with Multiwalled Carbon Nanotubes and Silica Fumes , 2022, Adsorption Science & Technology.

[4]  Yong Zhou,et al.  Effects of nano-SiO2, nano-CaCO3 and nano-TiO2 on properties and microstructure of the high content calcium silicate phase cement (HCSC) , 2022, Construction and Building Materials.

[5]  A. Ramezanianpour,et al.  Influence of metakaolin on fresh properties, mechanical properties and corrosion resistance of concrete and its sustainability issues: A review , 2021 .

[6]  C. Poon,et al.  Development of high performance lightweight concrete using ultra high performance cementitious composite and different lightweight aggregates , 2021, Cement and Concrete Composites.

[7]  S. Pang,et al.  The effect of fly ash content on flexural performance and fiber failure mechanism of lightweight deflection-hardening cementitious composites , 2021 .

[8]  A. Karrech,et al.  Development of ECO-UHPC utilizing gold mine tailings as quartz sand alternative , 2021 .

[9]  Reza Abaeian,et al.  The effect of carbon nanotubes on mechanical properties of structural lightweight concrete using LECA aggregates , 2021, Structures.

[10]  V. Li,et al.  Self-healing of PE-fiber reinforced lightweight high-strength engineered cementitious composite , 2021 .

[11]  A. Karrech,et al.  High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres , 2021 .

[12]  M. Sheikh,et al.  Mechanical properties of fiber and nano-Al2O3 reinforced magnesium phosphate cement composite , 2021 .

[13]  Saeid Hojjati Astani,et al.  The effects of Nano-Fe2O3 on the mechanical, physical and microstructure of cementitious composites , 2021 .

[14]  Wenhua Chen,et al.  Effects of cenosphere on the mechanical properties of cement-based composites , 2020 .

[15]  W. Tian,et al.  Effect of diameter of multi-walled carbon nanotubes on mechanical properties and microstructure of the cement-based materials , 2020 .

[16]  Taha M. Jassam,et al.  The synergic influence of carbon nanotube and nanosilica on the compressive strength of lightweight concrete , 2020 .

[17]  S. K. Adhikary,et al.  The Effect of Carbon Nanotubes on the Flowability, Mechanical, Microstructural and Durability Properties of Cementitious Composite: An Overview , 2020, Sustainability.

[18]  F. Xing,et al.  Use of nano-SiO2 to develop a high performance green lightweight engineered cementitious composites containing fly ash cenospheres , 2020 .

[19]  Jianqiao Ye,et al.  Dynamic compressive behavior of a novel ultra-lightweight cement composite incorporated with rubber powder , 2020, Composite Structures.

[20]  Surendra P. Shah,et al.  In situ-grown carbon nanotubes enhanced cement-based materials with multifunctionality , 2020 .

[21]  J. Liew,et al.  A Novel, Multifunctional, Floatable, Lightweight Cement Composite: Development and Properties , 2018, Materials.

[22]  Jiabao Yan,et al.  Developments and mechanical behaviors of steel fiber reinforced ultra-lightweight cement composite with different densities , 2018 .

[23]  J. Liew,et al.  Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures , 2018 .

[24]  A. Hawreen,et al.  Durability of multi-walled carbon nanotube reinforced concrete , 2018 .

[25]  Zeyu Lu,et al.  Utilization of fly ash cenosphere as lightweight filler in cement-based composites – A review , 2017 .

[26]  Zeyu Lu,et al.  Properties investigation of fiber reinforced cement-based composites incorporating cenosphere fillers , 2017 .

[27]  Ali Karrech,et al.  Green concrete with high-volume fly ash and slag with recycled aggregate and recycled water to build future sustainable cities , 2017 .

[28]  Zeyu Lu,et al.  Green lightweight cementitious composite incorporating aerogels and fly ash cenospheres – Mechanical and thermal insulating properties , 2016 .

[29]  Paulo J.M. Monteiro,et al.  Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings , 2015 .

[30]  S. Yehia,et al.  Effect of Fly Ash and Silica Fume on Properties of Lightweight Concrete , 2015 .

[31]  Min-hong Zhang,et al.  Method to determine mixture proportions of workable ultra lightweight cement composites to achieve target unit weights , 2014 .

[32]  Qian Zhang,et al.  Mechanical and thermal properties of green lightweight engineered cementitious composites , 2013 .

[33]  Min-hong Zhang,et al.  Flexural performance of fiber-reinforced ultra lightweight cement composites with low fiber content , 2013 .

[34]  Min-hong Zhang,et al.  Behavior of Steel–Concrete–Steel sandwich structures with lightweight cement composite and novel shear connectors , 2012 .

[35]  Jeffrey W. Berman,et al.  Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag , 2012 .

[36]  Y. Patil,et al.  Effectiveness of polycarboxylate as a dispersant of carbon nanotubes in concrete , 2020 .

[37]  Mohamed Elchalakani,et al.  Sustainable concrete with high volume GGBFS to build Masdar City in the UAE , 2014 .