Kenaf/polypropylene nonwoven composites: The influence of manufacturing conditions on mechanical, thermal, and acoustical performance

Abstract The kenaf/polypropylene nonwoven composites (KPNCs), with 50/50 blend ratio by weight, were produced by carding and needle-punching techniques, followed by a compression molding with 6-mm thick gauge. The uniaxial tensile, three-point bending, in-plane shearing, and Izod impact tests were performed to evaluate the composite mechanical properties. The thermal properties were evaluated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The performance of sound absorption and sound insulation was also investigated. An adhesive-free sandwich structure was found to have excellent sound absorption and insulation performance. Based on the evaluation of end-use performance, the best processing condition combination of 230 °C and 120 s was determined, and the correlation between mechanical properties and acoustical behavior was also verified by the panel resonance theory.

[1]  Jonathan Y. Chen,et al.  Spunlaced flax/polypropylene nonwoven as auto interior material: Acoustical and fogging performance , 2010 .

[2]  Farhang Pourboghrat,et al.  Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions , 2007 .

[3]  Yiping Qiu,et al.  Dynamic properties of 3-D orthogonal woven composite T-beam under transverse impact , 2008 .

[4]  A. Hassan,et al.  Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rise Husk Composites: The Influence of the Natural Fibers on the Mechanical, Thermal and Biodegradability Properties , 2010 .

[5]  Joseph H. Flynn,et al.  A quick, direct method for the determination of activation energy from thermogravimetric data , 1966 .

[6]  Frank T. Fisher,et al.  Viscoelastic interphases in polymer–matrix composites: theoretical models and finite-element analysis , 2001 .

[7]  D. Mueller,et al.  New Discovery in the Properties of Composites Reinforced with Natural Fibers , 2003 .

[8]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[9]  Y. Mai,et al.  Structural and mechanical behavior of polypropylene/maleated styrene-(ethylene-co-butylene)-styrene/sisal fiber composites prepared by injection molding , 2002 .

[10]  Jilei Zhang,et al.  Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites , 2008 .

[11]  Colin H. Hansen,et al.  ENGINEERING NOISE CONTROL: Theory and Practice , 1988 .

[12]  Ioan I. Negulescu,et al.  Kenaf/Ramie Composite for Automotive Headliner , 2005 .

[13]  Ayou Hao,et al.  Regenerated cellulose fibers from waste bagasse using ionic liquid , 2011 .

[14]  Sabu Thomas,et al.  Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites , 2004 .

[15]  S. M. Sapuan,et al.  Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam , 2010 .

[16]  Martin P. Ansell,et al.  The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – polyester resin matrix , 2004 .

[17]  Jonathan Y. Chen,et al.  Mechanical Properties of Kenaf/Polypropylene Nonwoven Composites , 2012, Journal of Polymers and the Environment.

[18]  Hazizan Md Akil,et al.  Chemical modification of kenaf fibers , 2007 .

[19]  D. V. Parikh,et al.  Reducing Automotive Interior Noise with Natural Fiber Nonwoven Floor Covering Systems , 2006 .

[20]  Muhammad Pervaiz,et al.  Carbon storage potential in natural fiber composites , 2003 .

[21]  R. Kozłowski,et al.  Flammability and fire resistance of composites reinforced by natural fibers , 2008 .

[22]  P. Herrera-Franco,et al.  Mechanical properties of continuous natural fibre-reinforced polymer composites , 2004 .

[23]  Marek-Jerzy Pindera,et al.  Micromechanical Analysis of the Creep Response of Unidirectional Composites , 1990 .

[24]  S. Joshi,et al.  Are natural fiber composites environmentally superior to glass fiber reinforced composites , 2004 .