A micrometer scale and low temperature PZT thick film MEMS process utilizing an aerosol deposition method

Abstract An aerosol deposition method and its lift-off process have been integrated for fabricating thick lead–zirconate–titanate (PZT) films for MEMS applications. The thickness of the deposited PZT films can be controlled over a wide range from 2 μm to more than 18 μm. In an area of 60 mm × 70 mm, an optimum deposition rate of 5 μm/h has been observed. For 13 μm thick PZT films, the minimum linewidth of 30 μm has been achieved. The fabricated thick PZT films exhibit a strong perovskite phase, after aerosol deposition at room temperature. To verify the functionality of deposited PZT films, a 7 μm × 700 μm × 900 μm cantilever-beam resonator has been fabricated. The resonance frequencies of the PZT cantilever resonator were measured and found to be similar to results of the finite element simulation. Finally, a functional 5 μm × 650 μm × 1200 μm PZT cantilever resonator was realized by annealing the PZT film at 500 °C.

[1]  A. Ding,et al.  Preparation of PZT thick films by one-step firing sol-gel process , 2001 .

[2]  Sang-Gook Kim,et al.  MEMS power generator with transverse mode thin film PZT , 2005 .

[3]  S. Beeby,et al.  Processing of PZT piezoelectric thick films on silicon for microelectromechancial systems , 1999 .

[4]  Francois Costa,et al.  Piezoelectric micro-transformer based on PZT unimorph membrane , 2004 .

[5]  L. Pintilie,et al.  Properties of Pb(Zr0.92Ti0.08)O3 thin films deposited by sol–gel , 2004 .

[6]  Harumichi Sato,et al.  High-speed metal-based optical microscanners using stainless-steel substrate and piezoelectric thick films prepared by aerosol deposition method , 2007 .

[7]  M. Esashi,et al.  Novel processing of high aspect ratio 1-3 structures of high density PZT , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[8]  Takefumi Kanda,et al.  A flat type touch probe sensor using PZT thin film vibrator , 2000 .

[9]  Jian Lu,et al.  A Novel Wet Etching Process of Pb(Zr,Ti)O3 Thin Films for Applications in Microelectromechanical System , 2004 .

[10]  T. Ren,et al.  High quality PZT thick films using silicon mold technique for MEMS applications , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[11]  S.W. Smith,et al.  Thick film sol gel PZT transducer using dip coating , 2000, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121).

[12]  M. Kurosawa,et al.  A cylindrical shaped micro ultrasonic motor utilizing PZT thin film (1.4 mm in diameter and 5.0 mm long stator transducer) , 2000 .

[13]  Young Ho Seo,et al.  Fabrication and characterization of the piezoelectric microtransformer based on microelectromechanical systems , 2006 .

[14]  T. Higuchi,et al.  Performance of hydrothermal PZT film on high intensity operation , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[15]  J. Akedo,et al.  Aerosol Deposition Method for Preparation of Lead Zirconate Titanate Thick Layer at Low Temperature –Improvement of Electrical Properties by Irradiation of Fast Atom Beam and Plasma– , 2003 .

[16]  J. Akedo,et al.  Actuation Properties of Lead Zirconate Titanate Thick Films Structured on Si Membrane by the Aerosol Deposition Method , 2000 .

[17]  B. Wagner,et al.  High-Rate Sputtering of Thick PZT Layers for MEMS Actuators , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[18]  Jun Akedo,et al.  Aerosol Deposition Method for Fabrication of Nano Crystal Ceramic Layer , 2004 .

[19]  Jiandong Fang,et al.  Self-assembly of PZT actuators for micropumps with high process repeatability , 2006, Journal of Microelectromechanical Systems.

[20]  Tomonobu Hata,et al.  Proposal of new mixture target for PZT thin films by reactive sputtering , 1998 .

[21]  S. Trolier-McKinstry,et al.  High-resolution dry etch patterning of PZT for piezoelectric MEMS devices , 1998, ISAF 1998. Proceedings of the Eleventh IEEE International Symposium on Applications of Ferroelectrics (Cat. No.98CH36245).

[22]  J. Akedo,et al.  Patterning Properties of PZT Thick Films Made by Aerosol Deposition , 2002 .

[23]  Neil M. White,et al.  Screen Printed PZT Thick Films Using Composite Film Technology , 2003 .

[24]  Stefan Johansson,et al.  Fabrication of multilayer 2D ultrasonic transducer microarrays by green machining , 2004 .