The active magnetic regenerator (AMR) refrigeration system represents an environmentally attractive alternative to vapour-compression refrigeration. This paper compares the results of two numerical AMR models: (1) a 1D finite difference model and (2) a 2D finite element model. Both models simulate a reciprocating AMR and can determine the cyclical steady-state temperature profile of the system as well as performance parameters such as the refrigeration capacity, the work input and the coefficient of performance (COP). The models are used to analyse an AMR with a regenerator made of flat parallel plates of gadolinium operating in the presence of a 1 T magnetic field. The results are used to discuss under which circumstances a 1D model is insufficient and a 2D model is necessary. The results indicate that when the temperature gradients in the AMR perpendicular to the flow are small a 1D model obtains accurate results of overall results such as the refrigeration capacity but that a 2D model is required for a detailed analysis of the phenomena occurring inside the AMR.
[1]
H. Schmidt,et al.
Two-dimensional mathematical model of a reciprocating room-temperature Active Magnetic Regenerator
,
2008
.
[2]
T. Petersen,et al.
Numerical modelling and analysis of a room temperature magnetic refrigeration system
,
2008
.
[3]
Kurt Engelbrecht,et al.
Review Article: Recent Developments in Room Temperature Active Magnetic Regenerative Refrigeration
,
2007
.
[4]
A. Rowe,et al.
Numerical Analysis of an Active Magnetic Regenerator (AMR) Refrigeration Cycle
,
2006
.
[5]
H. Martin,et al.
Improved approximation for the Nusselt number for hydrodynamically developed laminar flow between parallel plates
,
2002
.
[6]
C. P. Jeffreson.
Prediction of breakthrough curves in packed beds: I. Applicability of single parameter models
,
1972
.