Optimization in control of robots

Optimization of control algorithms and parameters of industrial robots is regarded as an effective means for improving their operational characteristics. Various possible versions of optimization problems for robots were considered in the scientific literature over the last 20 years. The paper presents a brief survey of research carried out in this field.

[1]  F. L. Chernous'ko,et al.  Decomposition and suboptimal control in dynamic systems , 1993 .

[2]  Hartmut Bossel,et al.  Modeling and simulation , 1994 .

[3]  Hans Bock,et al.  Time optimal trajectories of elbow robots by direct methods , 1989 .

[4]  Zhaoyu Wang,et al.  Global versus Local Optimization in Redundancy Resolution of Robotic Manipulators , 1988, Int. J. Robotics Res..

[5]  Arthur E. Ryson,et al.  Efficient Algorithm for Time-Optimal Control of a Two-Link Manipulator , 1990 .

[6]  Yaobin Chen,et al.  Existence and structure of minimum-time control for multiple robot arms handling a common object , 1991 .

[7]  John M. Hollerbach,et al.  Planning of Minimum- Time Trajectories for Robot Arms , 1986 .

[8]  Yoshihiko Nakamura,et al.  Optimal Redundancy Control of Robot Manipulators , 1987 .

[9]  Steven Dubowsky,et al.  Time optimal trajectory planning for robotic manipulators with obstacle avoidance: A CAD approach , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[10]  P. Marinov,et al.  A Direct Method for Optimal Control Synthesis of Manipulator Point-to-Point Motion , 1984 .

[11]  A. M. Formal'skii,et al.  The problem of the time-optimal turning of a manipulator , 1988 .

[12]  F. Chernousko,et al.  Time-optimal control for robotic manipulators , 1989 .

[13]  P. Kiriazov,et al.  Robot Control Synthesis in Conjunction with Moving Workpieces , 1987 .

[14]  C. Lin,et al.  Optimum Path Planning for Mechanical Manipulators , 1981 .

[15]  Osamu Sato,et al.  Minimum-energy control of a manipulator with two-degree of freedom , 1986 .

[16]  Bong Wie,et al.  Minimum-time pointing control of a two-link manipulator , 1988 .

[17]  J. Bobrow,et al.  Time-Optimal Control of Robotic Manipulators Along Specified Paths , 1985 .

[18]  Han-Pang Huang,et al.  Time-optimal control for a robotic contour following problem , 1988, IEEE J. Robotics Autom..

[19]  Friedrich Pfeiffer,et al.  A concept for manipulator trajectory planning , 1987, IEEE J. Robotics Autom..

[20]  John M. Hollerbach,et al.  Redundancy resolution of manipulators through torque optimization , 1987, IEEE J. Robotics Autom..

[21]  M. Vukobratovic,et al.  A Method for Optimal Synthesis of Manipulation Robot Trajectories , 1982 .

[22]  O. Yahşi,et al.  Minimal joint motion optimization of manipulators with extra degrees of freedom , 1984 .

[23]  Rajiv Dubey,et al.  A global cartesian space obstacle avoidance scheme for redundant manipulators , 1991 .

[24]  Felix L. Chernousko.  Decomposition and suboptimal control in dynamical systems , 1990 .

[25]  O. Sato,et al.  Minimum-Time Control of a Manipulator with Two-Degrees of Freedom , 1983 .

[26]  James E. Bobrow,et al.  Optimal Robot Path Planning Using the Minimum-Time Criterion , 2022 .

[27]  V. Srinivasan,et al.  Optimal Motion Programming of Robot Manipulators , 1985 .

[28]  Felix L. Chernousko,et al.  Optimal Control of Manipulation Robots , 1984 .

[29]  Hans Bock,et al.  Time optimal control of SCARA robots , 1990 .

[30]  F. L. Chernous'ko.  Decomposition and synthesis of control in dynamical systems , 1991 .

[31]  Lino Guzzella,et al.  Time-optimal motions of robots in assembly tasks , 1986 .

[32]  Inge Troch.  Time-suboptimal quasi-continuous path generation for industrial robots , 1989, Robotica.

[33]  Amit Ailon,et al.  On the existence of time-optimal control of mechanical manipulators , 1985 .

[34]  A. Bryson,et al.  Optimal control of systems with hard control bounds , 1985 .

[35]  N. N. Bolotnik,et al.  Optimization of manipulation robot control , 1990 .

[36]  Bernard Roth,et al.  The Near-Minimum-Time Control Of Open-Loop Articulated Kinematic Chains , 1971 .

[37]  Osamu Sato,et al.  Minimum-time-control of a Manipulator with Two Degrees of Freedom : Part 2, Dynamic Characteristics of Gear Train and Axes , 1985 .

[38]  Hans Joachim Oberle,et al.  Numerical computation of singular control functions for a two-link robot arm , 1987 .

[39]  V. F. Borisov,et al.  Modes with switchings of increasing frequency in the problem of controlling a robot , 1988 .

[40]  D. E. Whitney,et al.  The mathematics of coordinated control of prosthetic arms and manipulators. , 1972 .

[41]  Miomir Vukobratovic,et al.  A dynamic approach to nominal trajectory synthesis for redundant manipulators , 1984, IEEE Transactions on Systems, Man, and Cybernetics.

[42]  A. Liegeois,et al.  Automatic supervisory control of the configuration and behavior of multi-body mechanisms , 1977 .

[43]  J. Y. S. Luh,et al.  On-Line Computational Scheme for Mechanical Manipulators , 1980 .