Modelling, simulation and control of an industrial, semi-batch, emulsion-polymerization reactor

Abstract This paper presents an emulsion-polymerization model that is designed for an industrial, semi-batch reactor. The model consists of a reaction model and a calorimetry model, and as such enables us to predict the reactor temperature and the batch-output parameters, i.e., the conversion, the solids content and the viscosity. The model was validated on real-plant data and used in the analysis and design of the reactants dosing control. The control strategy proposed is valid for cases where evaporative cooling is either the only or an additional way to remove the heat of the reaction. It consists of an initiator and monomer dosing control, using the reactor temperature as a controlled variable. The simulation results and the real-plant testing show that the proposed reactants dosing control significantly reduces the variations in the reactor temperature and at the same time results in more uniform batch results.

[1]  J. Macgregor,et al.  Nonlinear adaptive temperature control of multi-product, semi-batch polymerization reactors , 1995 .

[2]  John R. Richards,et al.  Measurement and control of polymerization reactors , 2006, Comput. Chem. Eng..

[3]  R. Braatz,et al.  Direct design of pharmaceutical antisolvent crystallization through concentration control , 2006 .

[4]  R. Chylla,et al.  Temperature control of semibatch polymerization reactors , 1993 .

[5]  Evaristo C. Biscaia,et al.  Periodic oscillations in continuous free-radical solution polymerization reactors—a general approach , 2001 .

[6]  B. Srinivasan,et al.  The use of calorimetry for on-line optimisation of isothermal semi-batch reactors , 2001 .

[7]  F. B. Freire,et al.  Temperature oscillation calorimetry by means of a Kalman‐like observer: the joint estimation of Qr and UA in a stirred tank polymerization reactor , 2004 .

[8]  Jose A. Romagnoli,et al.  Inferential conversion monitoring and control in emulsion polymerisation through calorimetric measurements , 2002 .

[9]  Michael C. Georgiadis,et al.  Modelling the semi-batch vinyl acetate emulsion polymerization in a real-life industrial reactor , 2009 .

[10]  Wolfgang Marquardt,et al.  Productivity optimization of an industrial semi-batch polymerization reactor under safety constraints , 2000 .

[11]  Joseba Jokin Quevedo Casín,et al.  Identification and control : the gap between theory and practice , 2007 .

[12]  M. Beyer,et al.  Adaptive exact linearization control of batch polymerization reactors using a Sigma-Point Kalman Filter , 2008 .

[13]  F. Schork,et al.  Modeling poly(vinyl alcohol)‐stabilized vinyl acetate emulsion polymerization. I. Theory , 1993 .

[14]  Wang Yang,et al.  Industrial application of a nonlinear model predictive control to polymerization reactors , 2001 .

[15]  Veit Hagenmeyer,et al.  Feedforward control with online parameter estimation applied to the Chylla–Haase reactor benchmark , 2006 .

[16]  Francis J. Doyle,et al.  Modeling of particle size distribution in emulsion co-polymerization: comparison with experimental data and parametric sensitivity studies , 2002 .

[17]  Sebastian Engell,et al.  Model based operation of emulsion polymerization reactors with evaporative cooling: Application to vinyl acetate homopolymerization , 2007, Comput. Chem. Eng..

[18]  J. Leiza,et al.  Maximizing production and polymer quality (MWD and composition) in emulsion polymerization reactors with limited capacity of heat removal , 2003 .

[19]  W. Harmon Ray,et al.  Nonlinear dynamics found in polymerization processes — a review , 2000 .

[20]  Enrique Luis Lima,et al.  Dynamic optimization of semicontinuous emulsion copolymerization reactions: Composition and molecular weight distribution , 2000 .

[21]  R. Braatz,et al.  Identification and Control of Polymerization Reactors , 2007 .

[22]  F. Schork,et al.  Modeling poly(vinyl alcohol)-stabilized vinyl acetate emulsion polymerization. II. Comparison with experiment , 1993 .

[23]  Iqbal M. Mujtaba,et al.  Evaluation of neural networks-based controllers in batch polymerisation of methyl methacrylate , 2008, Neurocomputing.

[24]  M. A. Latifi,et al.  Optimization and non-linear control of a batch emulsion polymerization reactor , 1999 .

[25]  Francis J. Doyle,et al.  Population balance PSD model for emulsion polymerization with steric stabilizers , 2003 .