Adaptive RBFNN Strategy for Fault Tolerant Control: Application to DSIM under Broken Rotor Bars Fault

This paper presents a fault tolerant control (FTC) based on Radial Base Function Neural Network (RBFNN) using an adaptive control law for double star induction machine (DSIM) under broken rotor bars (BRB) fault in a squirrel-cage in order to improve its reliability and availability. The proposed FTC is designed to compensate for the default effect by maintaining acceptable performance in case of BRB. The sufficient condition for the stability of the closed-loop system in faulty operation is analyzed and verified using Lyapunov theory. To proof the performance and effectiveness of the proposed FTC, a comparative study within sliding mode control (SMC) is carried out. Obtained results show that the proposed FTC has a better robustness against the BRB fault.

[1]  Jinkun Liu,et al.  An adaptive RBF neural network control method for a class of nonlinear systems , 2018, IEEE/CAA Journal of Automatica Sinica.

[2]  Abdesselem Boulkroune,et al.  Adaptive fuzzy vector control for a doubly-fed induction motor , 2015, Neurocomputing.

[3]  P. Zanchetta,et al.  Model predictive direct flux vector control of multi three-phase induction motor drives , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[4]  Sukanta Das,et al.  Current Sensor Fault-Tolerant Control for Direct Torque Control of Induction Motor Drive Using Flux-Linkage Observer , 2017, IEEE Transactions on Industrial Informatics.

[5]  Yong Chen,et al.  Robust adaptive FTC allocation for over-actuated systems with uncertainties and unknown actuator non-linearity , 2018 .

[6]  Abderrahmen Bouguerra,et al.  Actuator fault tolerant control using adaptive RBFNN fuzzy sliding mode controller for coaxial octorotor UAV. , 2018, ISA transactions.

[7]  Ayman S. Abdel-Khalik,et al.  An improved fault tolerant for a five-phase induction machine under open gate transistor faults , 2016 .

[8]  T. Benslimane,et al.  Comparative Analysis between the Rotor Flux Oriented Control and Backstepping Control of a Double Star Induction Machine (DSIM) under Open-Phase Fault , 2017 .

[9]  Yugang Zhou,et al.  Adaptive Neural Network Saturated Control for MDF Continuous Hot Pressing Hydraulic System With Uncertainties , 2018, IEEE Access.

[10]  Mario J. Duran,et al.  Fault-Tolerant Control of Six-Phase Induction Motor Drives With Variable Current Injection , 2017, IEEE Transactions on Power Electronics.

[11]  Jin Huang,et al.  Quantitative broken rotor bar fault detection for closed-loop controlled induction motors , 2016 .

[12]  Gérard-André Capolino,et al.  Fuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases , 2010, IEEE Transactions on Industrial Electronics.

[13]  Om P. Malik,et al.  Fuzzy logic field oriented control of double star induction motor drive , 2017 .

[14]  Mohamed Benbouzid,et al.  Sliding mode based fault detection, reconstruction and fault tolerant control scheme for motor systems. , 2015, ISA transactions.

[15]  Samir Zeghlache,et al.  Adaptive Field-Oriented Control Using Supervisory Type-2 Fuzzy Control for Dual Star Induction Machine , 2017 .

[16]  M. B. Abd-el-Malek,et al.  Induction motor broken rotor bar fault location detection through envelope analysis of start-up current using Hilbert transform , 2017 .

[17]  Malek Ghanes,et al.  Sensorless fault tolerant control for induction motors , 2013 .