Design and optimization of a waveguide/fibre coupler in the visible range

When engineering photonic integrated structures, there will be a time that one must consider coupling out the electromagnetic field to an external device. Often, this coupling is made through a single mode optical fibre. Due to the mismatch in mode field diameters between waveguide and fibre modes, the propagating mode inside the dielectric waveguide must undertake a spot-size conversion. It requires to be radially expanded, often laterally by a tapered waveguide and longitudinally through other means, to match the radial profile of the optical fibre mode. Then, the energy must be coupled out of its propagating path into the plane of the optical fibre, through a structure that possesses such functional purpose. In this work, we describe the design steps and optimization of a silicon nitride waveguide/fibre coupler operating in the visible range. To this end, we start by designing an optimized 3D taper waveguide, using Beam Propagation method, that performs as the spot-size converter. Next, through the Eigen Mode Expansion method, a 2D subwavelength grating is designed and optimized regarding substrate leakage and propagating plane energy coupling out, thus vertically validating the energy distribution of the outgoing profile. The required subwavelength grating apodization is accomplished, once more through the Eigen Mode Expansion method, and by carefully engineering a metamaterial that performs accordingly. The obtained diffraction grating is then expanded horizontally to create a 3D structure and laterally validated through Beam Propagation method. Finally, the whole 3D structure is optimized and validated through Finite Differences Time Domain simulations regarding energy profile coupling out, and overlap integral matching is established with the fibre mode profile.