Microwave Heat Treatment on Aluminium 6061 Alloy-Boron Carbide Composites☆

Abstract This paper deals with the comparison studies on mechanical properties for cleaner energy like microwave heat treatment and conventional heat treatment of Al (6061) -B4C composite. Aluminium Metal Matrix Composites (MMC) are fabricated through two step stir casting method. Fabricated composites were subjected to microwave and conventional heat treatment for enhancing the mechanical properties. Energy efficient microwave heat treatment has produced comparable mechanical properties with conventional heat treatment. Machinability characteristics of microwave heat treated and non-heat treated composites were evaluated using a lathe tool dynamometer. Machined surfaces were analyzed by SEM and surface roughness meter.

[1]  A. Kennedy.  The microstructure and mechanical properties of Al-Si-B4C metal matrix composites , 2002 .

[2]  H. Werheit.  Boron-rich solids : a chance for high-efficiency high-temperature thermoelectric energy conversion , 1995 .

[3]  R. Menéndez,et al.  Preparation of pitch-based carbon–copper composites for electrical applications , 2004 .

[4]  S. K. Malhotra,et al.  Enhancing the metallurgical properties of WC insert (K-20) cutting tool through microwave treatment , 2002 .

[5]  Ibrahim Ciftci,et al.  Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites , 2004 .

[6]  S. Aravindan,et al.  Microwave sintering of copper–graphite composites , 2009 .

[7]  K. Weinert,et al.  A Consideration of Tool Wear Mechanism when Machining Metal Matrix Composites (MMC) , 1993 .

[8]  G. Padmanabhan,et al.  ISSN 2249-9679 Original Article Fabrication and mechanical properties of aluminium-boron carbide composites , 2012 .

[9]  K. Reinmuth,et al.  Borhaltige keramische neutronenabsorberwerkstoffe , 1984 .

[10]  J. Monaghan,et al.  The drilling of an Al/SiC metal-matrix composite , 1992 .

[11]  S. Aravindan,et al.  Tribological performance of microwave sintered copper–TiC–graphite hybrid composites , 2011 .

[12]  L. Schadler,et al.  Fundamentals and applications of micro Raman spectroscopy to strain measurements in fibre reinforced composites , 1995 .

[13]  Tsu-Wei Chou,et al.  Microwave processing: fundamentals and applications , 1999 .