Model based in situ calibration of six axis force torque sensors
暂无分享,去创建一个
[1] Daniel E. Whitney,et al. Historical Perspective and State of the Art in Robot Force Control , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.
[2] Masaru Uchiyama,et al. A Systematic Design Procedure to Minimize a Performance Index for Robot Force Sensors , 1991 .
[3] Giulio Sandini,et al. Exploiting proximal F/T measurements for the iCub active compliance , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[4] Gabriele Nava,et al. Stability analysis and design of momentum-based controllers for humanoid robots , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).
[5] P. Dario,et al. Investigation on calibration methods for multi-axis, linear and redundant force sensors , 2007 .
[6] Heikki Haario,et al. Novel Online Re-Calibration Method for Multi-Axis Force/Torque Sensor of ITER Welding/Machining Robot , 2013, IEEE Sensors Journal.
[7] Giulio Sandini,et al. Force feedback exploiting tactile and proximal force/torque sensing , 2012, Autonomous Robots.
[8] Daniele Pucci,et al. In situ calibration of six-axis force-torque sensors using accelerometer measurements , 2014, 2015 IEEE International Conference on Robotics and Automation (ICRA).
[9] Jack T Dennerlein,et al. A force plate based method for the calibration of force/torque sensors. , 2012, Journal of biomechanics.
[10] R. Du,et al. What Happened at the DARPA Robotics Challenge , and Why ? , 2015 .
[11] Heinz Wörn,et al. Techniques for Robotic Force Sensor Calibration , 2011 .
[12] Bernard Roth,et al. ON FORCE SENSING INFORMATION AND ITS USE IN CONTROLLING MANIPULATORS , 1977 .
[13] Á. Tar,et al. Development of a low cost 3D optical compliant tactile force sensor , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).