Implementation of PWM control strategy for torque ripples reduction in brushless DC motors

[1]  Sang-Yong Jung,et al.  Commutation Control for the Low-Commutation Torque Ripple in the Position Sensorless Drive of the Low-Voltage Brushless DC Motor , 2014, IEEE Transactions on Power Electronics.

[2]  A. Masmoudi,et al.  Direct torque control of brushless DC motor drives with improved reliability , 2013, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER).

[3]  Yen-Shin Lai,et al.  Pulsewidth Modulation Technique for BLDCM Drives to Reduce Commutation Torque Ripple Without Calculation of Commutation Time , 2011, IEEE Transactions on Industry Applications.

[4]  Chansu Yu,et al.  Compensation of Torque Ripple in High Performance BLDC Motor Drives , 2010 .

[5]  Changliang Xia,et al.  A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC–DC Converter , 2010, IEEE Transactions on Industrial Electronics.

[6]  H. Zeroug,et al.  Analysis of various control strategy performances of BDCM for industrial applications , 2010 .

[7]  Byung-taek Kim,et al.  Minimization of torque ripple in a BLDC motor using an improved DC link voltage control method , 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

[8]  Carlo Concari,et al.  Vibrationless alignment algorithm for incremental encoder based BLDC drives , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[9]  Guangwei Meng,et al.  Commutation torque ripple reduction in BLDC motor using PWM_ON_PWM mode , 2009, 2009 International Conference on Electrical Machines and Systems.

[10]  Y. Chuang,et al.  Analysis of commutation torque ripple using different PWM modes in BLDC motors , 2009, Conference Record 2009 IEEE Industrial & Commercial Power Systems Technical Conference.

[11]  Ali Emadi,et al.  A low-cost digital control scheme for Brushless DC motor drives in domestic applications , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[12]  Cunshan Zhang,et al.  A PWM control algorithm for eliminating torque ripple caused by stator magnetic field jump of brushless DC motors , 2008, 2008 7th World Congress on Intelligent Control and Automation.

[13]  J. Milimonfared,et al.  Minimization of commutation torque ripple in brushless DC motors with optimized input voltage control , 2008, 2008 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.

[14]  Jung-Pyo Hong,et al.  Reducing torque ripple of brushless DC motor by varying input voltage , 2006, IEEE Transactions on Magnetics.

[15]  Zhang Zhong-chao,et al.  A novel PWM scheme to eliminate the diode freewheeling in the inactive phase in BLDC motor , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[16]  C. Espanet,et al.  Reduction of the torque ripples in brushless PM motors by optimization of the supply - theoretical method and experimental implementation , 2004, 2004 IEEE International Symposium on Industrial Electronics.

[17]  Gui-Jia Su,et al.  Multilevel DC link inverter for brushless permanent magnet motors with very low inductance , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[18]  Chen Boshi,et al.  Influences of PWM mode on the current generated by BEMF of switch-off phase in control system of BLDC motor , 2001, ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501).

[19]  Chen Boshi,et al.  The different influences of four PWM modes on the commutation torque ripples in sensorless brushless DC motors control system , 2001, ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501).

[20]  Gyu-Ha Choe,et al.  Analysis of torque ripple in BLDC motor with commutation time , 2001, ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No.01TH8570).

[21]  Bhim Singh,et al.  Recent advances in permanent magnet brushless DC motors , 1997 .

[22]  Thomas M. Jahns,et al.  Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[23]  Joachim Holtz,et al.  Identification and compensation of torque ripple in high-precision permanent magnet motor drives , 1996, IEEE Trans. Ind. Electron..

[24]  M. Lajoie-Mazenc,et al.  Analysis of torque ripple in electronically commutated permanent magnet machines and minimization methods , 1989 .

[25]  Yoshihiro Kawase,et al.  Torque ripple improvement for brushless DC miniature motors , 1989 .

[26]  Pragasen Pillay,et al.  Modeling, simulation, and analysis of permanent-magnet motor drives. II. The brushless DC motor drive , 1989 .

[27]  Basem Abu Zneid,et al.  COMMUTATION TIME ESTIMATOR FOR PM BLDC MOTOR TORQUE SIGNATURE ENHANCEMENT , 2015 .

[28]  Dahaman Ishak,et al.  Minimization of torque ripples in BLDC motors due to phase commutation - a review , 2011 .

[29]  Kim Il-Hwan,et al.  Commutation Time Control for Torque Ripple Reduction of BLDC Motors , 2006 .

[30]  Emadi Ali,et al.  Energy-efficient electric motors , 2005 .

[31]  Joong-Ho Song,et al.  Commutation torque ripple reduction in brushless DC motor drives using a single DC current sensor , 2004, IEEE Transactions on Power Electronics.

[32]  Xiang-jun Zhang,et al.  Influence of PWM modes on commutation torque ripples in sensorless brushless DC motor control system , 2001 .

[33]  ZHANGXiang－jun,et al.  Influence of PWM Modes on Commutation Torque Ripples in Sensorless Brushless DC Motor Control System , 2001 .