Application of heat pipe in an experimental investigation on a novel photovoltaic/thermal (PV/T) system

Abstract One of the most significant current discussions in world energy demand which is difficult to ignore is renewable energy. Recently, researchers have shown an increased interest in application of photovoltaic technology in this indispensable area. This paper has given an account of and the reasons for the widespread use of photovoltaic/thermal system. In this study, a photovoltaic/thermal (PV/T) hybrid system is proposed by selecting heat pipe (thermosyphon type) to absorb isothermally the excessive heat from solar PV cells. The investigations on photovoltaic/thermal system were carried out in both spring and summer. In spring the systems were placed at 30° angle and methanol was used as working fluid for the thermosyphons. During the tests, the photovoltaic/thermal system generated an average of 5.67% electrical power more than the photovoltaic one. What is more, on average, the thermal efficiency of the photovoltaic/thermal system was 16.35% more. In summer the systems were positioned at 40° angle and acetone was used as working fluid. In the course of the tests, the photovoltaic/thermal system produced an average of 7.7% power more than the photovoltaic system and approximately, its thermal efficiency was 45.14%. Consequently, the proposed state-of-art resulted in a substantial temperature drop in the panel (up to 15 °C) and more electrical power generation. The findings of this experimental study support the idea of incorporating heat pipe technology into photovoltaic electricity generation for the purpose of efficiency enhancement and thermal energy gain.

[1]  C. S. Fuller,et al.  A New Silicon p‐n Junction Photocell for Converting Solar Radiation into Electrical Power , 1954 .

[2]  J. P. Holman,et al.  Experimental methods for engineers , 1971 .

[3]  Arvind Tiwari,et al.  Experimental validation of glazed hybrid micro-channel solar cell thermal tile , 2011 .

[4]  Tin-Tai Chow,et al.  Performance analysis of photovoltaic-thermal collector by explicit dynamic model , 2003 .

[5]  Ha Herbert Zondag,et al.  Flat-plate PV-Thermal collectors and systems : a review , 2008 .

[6]  Robert Foster,et al.  Solar Energy: Renewable Energy and the Environment , 2009 .

[7]  E. Azad,et al.  Assessment of three types of heat pipe solar collectors , 2012 .

[8]  E. Azad,et al.  Theoretical and experimental investigation of heat pipe solar collector , 2008 .

[9]  Tin-Tai Chow,et al.  Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water , 2006 .

[10]  S. Rittidech,et al.  Experimental study of the performance of a solar collector by closed-end oscillating heat pipe (CEOHP) , 2007 .

[11]  Peter N. Gorley,et al.  Photovoltaic solar cells performance at elevated temperatures , 2005 .

[12]  K. F. Fong,et al.  Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover , 2009 .

[13]  Soteris A. Kalogirou,et al.  Photovoltaic thermal (PV/T) collectors: A review , 2007 .

[14]  Y. Tripanagnostopoulos,et al.  Hybrid photovoltaic/thermal solar systems , 2002 .

[15]  G. N. Tiwari,et al.  Overall energy, exergy and carbon credit analysis by different type of hybrid photovoltaic thermal air collectors , 2013 .

[16]  Zhang Tao,et al.  Annual analysis of heat pipe PV/T systems for domestic hot water and electricity production , 2012 .

[17]  Sanjay Agrawal,et al.  Enviroeconomic analysis and energy matrices of glazed hybrid photovoltaic thermal module air collector , 2013 .

[18]  S. J. Harrison,et al.  The effect of hybrid photovoltaic thermal device operating conditions on intrinsic layer thickness optimization of hydrogenated amorphous silicon solar cells , 2012 .

[19]  Tin-Tai Chow,et al.  Performance of the photovoltaic solar-assisted heat pump system with and without glass cover in winter: A comparative analysis , 2008 .

[20]  M. Wolf,et al.  Performance analyses of combined heating and photovoltaic power systems for residences , 1976 .

[21]  S. C. Solanki,et al.  Photovoltaic modules and their applications: A review on thermal modelling , 2011 .

[22]  Y. Vorobiev,et al.  Photovoltaic/thermal solar hybrid system with bifacial PV module and transparent plane collector , 2007 .

[23]  Arvind Tiwari,et al.  Performance evaluation of solar PV/T system: An experimental validation , 2006 .

[24]  Gang Pei,et al.  Numerical study of PV/T-SAHP system , 2008 .

[25]  Ji Jie,et al.  Performance study and parametric analysis of a novel heat pipe PV/T system , 2012 .

[26]  Lan Xiao,et al.  A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation , 2011 .

[27]  Gilles Fraisse,et al.  Energy performance of water hybrid PV/T collectors applied to combisystems of Direct Solar Floor type , 2007 .

[28]  Sanjay Agrawal,et al.  Energy and exergy analysis of hybrid micro-channel photovoltaic thermal module , 2011 .

[29]  S. Rittidech,et al.  Experimental study of the performance of a circular tube solar collector with closed-loop oscillating heat-pipe with check valve (CLOHP/CV) , 2009 .