Influence of microstructure on near-threshold fatigue-crack propagation in ultra-high strength steel

AbstractFatigue crack propagation behaviour of an ultra-high strength, silicon-modified AISI 4340 alloy steel (300-M) has been investigated in moist air over an extremely wide range of growth rates from 10−8 to 10−1 mm/cycle. Particular emphasis has been devoted to the influence of microstructure on fatigue-fracture behaviour near the threshold stress intensity, ∆K 0 below which crack growth cannot be detected. By varying microstructure through quench and tempering and isothermal transformations, the threshold stress intensity and near-threshold crack-propagation rates are observed to be influenced by mean stress (load ratio), material strength, grain size, and impurity segregation. The threshold ∆K 0 for crack propagation is found to be inversely related to the strength of the steel, and a relationship between ∆K 0 and cyclic yield stress is observed. It is shown how near-threshold crack -growth resistance can be improved by (i) cyclic softening, (ii) coarsening the prior austenite grain size, and (iii) ...

[1]  Robert P. Wei,et al.  Environmental fatigue crack propagation of aluminum alloys at low stress intensity levels , 1970 .

[2]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[3]  J. F. Knott,et al.  Mechanisms of fatigue crack growth in low alloy steel , 1973 .

[4]  R. J. Cooke,et al.  The slow fatigue crack growth and threshold behaviour of a medium carbon alloy steel in air and vacuum , 1975 .

[5]  C. Beevers,et al.  The Effects of Load Ratio, Interstitial Content, and Grain Size on Low-Stress Fatigue-Crack Propagation in α-Titanium , 1973 .

[6]  J. F. Knott,et al.  Micro cleavage cracking during fatigue crack propagation in low strength steel , 1974 .

[7]  R. J. Richards,et al.  Model of dislocation sweep-in of hydrogen during fatigue crack growth , 1975 .

[8]  C. E. Richards,et al.  The influence of stress intensity and microstructure on fatigue crack propagation in ferritic materials , 1972 .

[9]  Volker Weiss,et al.  A note on the threshold condition for fatigue crack propagation , 1974 .

[10]  M. Klesnil,et al.  Effect of stress cycle asymmetry on fatigue crack growth , 1972 .

[11]  W. Gerberich,et al.  Hydrogen-controlled cracking—An approach to threshold stress intensity , 1975 .

[12]  R. Wei,et al.  A study of crack closure in fatigue , 1974 .

[13]  J. M. Capus.  L’influence d’oligo-éléments sur la résilience des aciers faiblement alliés, trempés et revenus , 1959 .

[14]  J. Knott,et al.  Segregation Effects and the Toughness of Untempered Low-Alloy Steels , 1972 .

[15]  A. Saxena,et al.  A model for fatigue crack propagation , 1975 .

[16]  A. W. Thompson,et al.  Effect of hydrogen on behavior of materials , 1976 .

[17]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[18]  S. Purushothaman,et al.  A fatigue crack growth mechanism for ductile materials , 1975 .

[19]  B. Tomkins.  FATIGUE CRACK PROPAGATION: AN ANALYSIS. , 1968 .

[20]  P. Irving,et al.  The effect of air and vacuum environments on fatigue crack growth rates in Ti-6Al-4V , 1974, Metallurgical and Materials Transactions B.

[21]  S. Rolfe,et al.  Fatigue-crack propagation in high yield-strength steels , 1971 .

[22]  Paul C. Paris,et al.  SUB-CRITICAL FLAW GROWTH. , 1968 .

[23]  T. C. Lindley,et al.  The relevance of crack closure to fatigue crack propagation , 1974 .

[24]  R. Fournelle,et al.  Cyclic stress strain relations and strain-controlled fatigue of 4140 steel , 1975 .

[25]  O. Buck,et al.  Crack tip closure and environmental crack propagation , 1975 .

[26]  A study of the effects of mechanical and environmental variables on fatigue crack closure , 1975 .

[27]  R. Pelloux,et al.  Crack extension by alternating shear , 1970 .

[28]  L. P. Pook,et al.  A fracture mechanics analysis of fatigue crack growth data for various materials , 1971 .

[29]  T. Misawa,et al.  The thermodynamic consideration for Fe-H2O system at 25°C‡ , 1973 .

[30]  Jacques Masounave,et al.  Effect of grain size on the threshold stress intensity factor in fatigue of a ferritic steel , 1976 .