Engineering evaluation of the energy-storing orthosis FES gait system

A system to restore walking in the vicinity of a wheelchair for people with paraplegia resulting from spinal cord injury is under development. The approach combines single channel surface electrical stimulation with an orthosis. The orthosis is spring loaded and contains a pneumatic system that stores energy during knee extension caused by quadriceps stimulation and transfers it to hip joint for hip extension. A laboratory version of the prototype of the gait system has been fabricated and engineering bench tests were performed. The paper presents the design of the wearable prototype and results of bench testing.

[1]  M Goldfarb,et al.  Design of a controlled-brake orthosis for FES-aided gait. , 1996, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[2]  A. Townson,et al.  Cross-cultural differences in preference for recovery of mobility among spinal cord injury rehabilitation professionals , 2006, Spinal Cord.

[3]  K. Anderson.  Targeting recovery: priorities of the spinal cord-injured population. , 2004, Journal of neurotrauma.

[4]  B. Heller,et al.  A new hybrid spring brake orthosis for controlling hip and knee flexion in the swing phase , 2001, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[5]  William Durfee,et al.  Single channel hybrid FES gait system using an energy storing orthosis: Preliminary design , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[6]  K R Kaufman,et al.  Optimization and application of a wrap-spring clutch to a dynamic knee-ankle-foot orthosis. , 1999, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[7]  Michael Goldfarb,et al.  Design of a joint-coupled orthosis for FES-aided gait , 2009, 2009 IEEE International Conference on Rehabilitation Robotics.

[8]  A V Nene,et al.  Energy cost of paraplegic locomotion with the ORLAU ParaWalker , 1989, Paraplegia.

[9]  A. Hosman,et al.  Who wants to walk? Preferences for recovery after SCI: a longitudinal and cross-sectional study. , 2008 .

[10]  M. Goldfarb,et al.  Preliminary evaluation of a controlled-brake orthosis for FES-aided gait , 2003, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[11]  William K Durfee,et al.  Design and simulation of a pneumatic, stored-energy, hybrid orthosis for gait restoration. , 2005, Journal of biomechanical engineering.

[12]  Scott Tashman,et al.  Development of hybrid orthosis for standing, walking, and stair climbing after spinal cord injury. , 2009, Journal of rehabilitation research and development.

[13]  J. M. Hausdorff,et al.  Open-loop position control of the knee joint using electrical stimulation of the quadriceps and hamstrings , 2006, Medical and Biological Engineering and Computing.

[14]  A. Hosman,et al.  Who wants to walk? Preferences for recovery after SCI: a longitudinal and cross-sectional study , 2008, Spinal Cord.

[15]  Brian J. Andrews,et al.  A Modular Hybrid FES Orthosis For Paraplegics , 1990, [1990] Proceedings of the Twelfth Annual International Conference of the IEEE Engineering in Medicine and Biology Society.