Motion control of joystick interfaced electric wheelchair for improvement of safety and riding comfort

Abstract Nowadays powered wheelchairs are widely utilized to help people’s locomotion. However, many commercialized powered wheelchairs still provide unsatisfactory ride quality, which is mainly due to not-well-designed control algorithm. To address this issue, this paper proposes a motion control algorithm that can improve the safety and riding comfort of the user and can be easily implemented on a powered wheelchair. To design the controller in an intuitive way, locomotion mode of a wheelchair is suggested at first, which consists of the longitudinal mode and the rotational mode. Then, the motion reference generator, wheelchair motion observer and control algorithms are designed in this locomotion mode. Moreover, this locomotion mode-based motion control does not require encoders, which makes the implementation of the algorithm affordable for many commercialized wheelchairs. The detail of the controller and state observer is studied, and experimental results to verify the validity of the proposed controller and the state observer are explained.

[1]  Kanghyun Nam,et al.  Two-dimensional assist control for power-assisted wheelchair considering straight and rotational motion decomposition , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[2]  Johan S Rietman,et al.  A systematic review on the pros and cons of using a pushrim-activated power-assisted wheelchair , 2013, Clinical rehabilitation.

[3]  Yoichi Hori,et al.  Disturbance Attenuation Control for Power-Assist Wheelchair Operation on Slopes , 2014, IEEE Transactions on Control Systems Technology.

[4]  Yiannis Demiris,et al.  Collaborative Control for a Robotic Wheelchair: Evaluation of Performance, Attention, and Workload , 2012, IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics).

[5]  Ulrich Borgolte,et al.  Architectural Concepts of a Semi-autonomous Wheelchair , 1998, J. Intell. Robotic Syst..

[6]  Masayoshi Wada.  Mechanism and control of a 4WD robotic platform for omnidirectional wheelchairs , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  H. Seki,et al.  Novel straight road driving control of power assisted wheelchair based on disturbance estimation and minimum jerk control , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[8]  Rory A Cooper,et al.  Joystick control for powered mobility: current state of technology and future directions. , 2010, Physical medicine and rehabilitation clinics of North America.

[9]  Kazuhiko Terashima,et al.  Semi-autonomous obstacle avoidance of omnidirectional wheelchair by joystick impedance control , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[10]  Sunil K. Agrawal,et al.  Assisting Versus Repelling Force-Feedback for Learning of a Line Following Task in a Wheelchair , 2013, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[11]  Soo Jeon,et al.  Kinematic Kalman Filter (KKF) for Robot End-Effector Sensing , 2009 .

[12]  Yoichi Hori,et al.  One-handed propulsion control of power-assisted wheelchair with advanced turning mode , 2014, 2014 IEEE 13th International Workshop on Advanced Motion Control (AMC).

[13]  Hirokazu Seki,et al.  Novel Regenerative Braking Control of Electric Power-Assisted Wheelchair for Safety Downhill Road Driving , 2009, IEEE Transactions on Industrial Electronics.

[14]  Rory A. Cooper,et al.  Performance assessment of a pushrim-activated power-assisted wheelchair control system , 2002, IEEE Trans. Control. Syst. Technol..

[15]  S P Levine,et al.  The NavChair Assistive Wheelchair Navigation System. , 1999, IEEE transactions on rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[16]  H. Seki,et al.  Straight and Circular Road Driving Control for Power Assisted Wheelchair Based on Fuzzy Algorithm , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[17]  Sehoon Oh,et al.  Modal force and torque control with wire-tension control using series elastic actuator for body weight support system , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[18]  Yoichi Hori,et al.  Operation state observation and condition recognition for the control of power-assisted wheelchair ☆ , 2014 .

[19]  N. Matsunaga,et al.  Driving experiment of front drive type electric wheelchair using yaw-rate control , 2012, 2012 Proceedings of SICE Annual Conference (SICE).

[20]  Young-bong Bang,et al.  Power-Assisted Wheelchair With Gravity and Friction Compensation , 2016, IEEE Transactions on Industrial Electronics.

[21]  Kenzo Kamiyama,et al.  A Microprocessor-Controlled High-Accuracy Wide-Range Speed Regulator for Motor Drives , 1982, IEEE Transactions on Industrial Electronics.

[22]  Yoichi Hori,et al.  Development of Extended Wheelchair Operation Observer to Estimate Precise Two-Dimensional Tilt Information , 2007 .

[23]  Tim Laue,et al.  Controlling an automated wheelchair via joystick/head-joystick supported by smart driving assistance , 2009, 2009 IEEE International Conference on Rehabilitation Robotics.

[24]  Yoichi Hori,et al.  Yaw motion control of power-assisted wheelchairs under lateral disturbance environment , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[25]  Jonathan Pearlman,et al.  A drive system to add standing mobility to a manual standing wheelchair , 2016, Assistive technology : the official journal of RESNA.

[26]  Kouhei Ohnishi,et al.  Advanced Motion Control for Wheelchair in Unknown Environment , 2006, 2006 IEEE International Conference on Systems, Man and Cybernetics.

[27]  K. Ohnishi,et al.  A velocity measurement method for acceleration control , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[28]  Huiyi Wang,et al.  Fundamental Study of Jerk: Evaluation of Shift Quality and Ride Comfort , 2004 .

[29]  H. Harry Asada,et al.  Design and control of a variable footprint mechanism for holonomic omnidirectional vehicles and its application to wheelchairs , 1999, IEEE Trans. Robotics Autom..

[30]  Dan Ding,et al.  Analysis of driving backward in an electric-powered wheelchair , 2004, IEEE Transactions on Control Systems Technology.

[31]  Yoichi Hori,et al.  Integrated Motion Control of a Wheelchair in the Longitudinal, Lateral, and Pitch Directions , 2008, IEEE Transactions on Industrial Electronics.

[32]  Shirley G Fitzgerald,et al.  Comparison of virtual and real electric powered wheelchair driving using a position sensing joystick and an isometric joystick. , 2002, Medical engineering & physics.

[33]  Oishee Mazumder,et al.  Design and Performance Evaluation of 4 Wheeled Omni Wheelchair with Reduced Slip and Vibration , 2017 .

[34]  M.J. Lawn,et al.  Modeling of a stair-climbing wheelchair mechanism with high single-step capability , 2003, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[35]  Anas Fattouh,et al.  Force feedback joystick control of a powered wheelchair: preliminary study , 2004, 2004 IEEE International Conference on Systems, Man and Cybernetics (IEEE Cat. No.04CH37583).

[36]  H. Fujimoto,et al.  Motion stabilization control of electric vehicle under snowy conditions based on yaw-moment observer , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[37]  Mi-Ching Tsai,et al.  Synchronized motion control for 2D joystick-based electric wheelchair driven by two wheel motors , 2012, 2012 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).