Dependence assessment in human reliability analysis based on D numbers and AHP

Abstract Since human errors always cause heavy loss especially in nuclear engineering, human reliability analysis (HRA) has attracted more and more attention. Dependence assessment plays a vital role in HRA, measuring the dependence degree of human errors. Many researches have been done while still have improvement space. In this paper, a dependence assessment model based on D numbers and analytic hierarchy process (AHP) is proposed. Firstly, identify the factors used to measure the dependence level of two human operations. Besides, in terms of the suggested dependence level, determine and quantify the anchor points for each factor. Secondly, D numbers and AHP are adopted in model. Experts evaluate the dependence level of human operations for each factor. Then, the evaluation results are presented as D numbers and fused by D number’s combination rule that can obtain the dependence probability of human operations for each factor. The weights of factors can be determined by AHP. Thirdly, based on the dependence probability for each factor and its corresponding weight, the dependence probability of two human operations and its confidence can be obtained. The proposed method can well address the fuzziness and subjectivity in linguistic assessment. The proposed method is well applicable to assess the dependence degree of human errors in HRA which inherently has a linguistic assessment process.

[1]  Chunhe Xie,et al.  Sensor Data Fusion with Z-Numbers and Its Application in Fault Diagnosis , 2016, Sensors.

[2]  Sankaran Mahadevan,et al.  Inclusion of task dependence in human reliability analysis , 2014, Reliab. Eng. Syst. Saf..

[3]  Hing Kai Chan,et al.  An AHP approach in benchmarking logistics performance of the postal industry , 2006 .

[4]  Hu-Chen Liu,et al.  A novel approach for failure mode and effects analysis using combination weighting and fuzzy VIKOR method , 2015, Appl. Soft Comput..

[5]  Luca Podofillini,et al.  A fuzzy set-based approach for modeling dependence among human errors , 2009, Fuzzy Sets Syst..

[6]  Melike Erdogan,et al.  A combined fuzzy approach to determine the best region for a nuclear power plant in Turkey , 2016, Appl. Soft Comput..

[7]  Chunhe Xie,et al.  A modified method for risk evaluation in failure modes and effects analysis of aircraft turbine rotor blades , 2016 .

[8]  Alessio Ishizaka,et al.  Multi-criteria Decision Analysis: Methods and Software , 2013 .

[9]  Pei-Hsuan Tsai,et al.  Evaluating business performance of wealth management banks , 2010, Eur. J. Oper. Res..

[10]  Jurgita Antucheviciene,et al.  HYBRID MULTIPLE CRITERIA DECISION MAKING METHODS: A REVIEW OF APPLICATIONS IN ENGINEERING , 2016 .

[11]  Weiru Liu,et al.  An evidential fusion approach for gender profiling , 2016, Inf. Sci..

[12]  Gwo-Hshiung Tzeng,et al.  Combination of fuzzy-AHP and DEMATEL-ANP with GIS in a new hybrid MCDM model used for the selection of the best space for leisure in a blighted urban site , 2015 .

[13]  Karin Laumann,et al.  Task complexity as a performance shaping factor: A review and recommendations in Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) adaption , 2015 .

[14]  Fuyuan Xiao,et al.  An improved distance-based total uncertainty measure in belief function theory , 2017, Applied Intelligence.

[15]  Yi Yang,et al.  A new distance-based total uncertainty measure in the theory of belief functions , 2016, Knowl. Based Syst..

[16]  Yong Deng,et al.  A New Aggregating Operator for Linguistic Information Based on D Numbers , 2016, Int. J. Uncertain. Fuzziness Knowl. Based Syst..

[17]  Zhongsheng Hua,et al.  On the extent analysis method for fuzzy AHP and its applications , 2008, Eur. J. Oper. Res..

[18]  Yan-Quan Feng,et al.  Embedding even cycles on folded hypercubes with conditional faulty edges , 2015, Inf. Process. Lett..

[19]  C. S. do Nascimento,et al.  Human reliability analysis data obtainment through fuzzy logic in nuclear plants , 2012 .

[20]  Arthur P. Dempster,et al.  Upper and Lower Probabilities Induced by a Multivalued Mapping , 1967, Classic Works of the Dempster-Shafer Theory of Belief Functions.

[21]  Yong Hu,et al.  A generalized evidence distance , 2013, ArXiv.

[22]  Xinyang Deng,et al.  D-DEMATEL: a new method to identify critical success factors in emergency management , 2017 .

[23]  Yong Hu,et al.  New Failure Mode and Effects Analysis: An Evidential Downscaling Method , 2016, Qual. Reliab. Eng. Int..

[24]  Using expert models in human reliability analysis-a dependence assessment method based on fuzzy logic. , 2010, Risk analysis : an official publication of the Society for Risk Analysis.

[25]  Xinyang Deng,et al.  Evidence Combination From an Evolutionary Game Theory Perspective , 2015, IEEE Transactions on Cybernetics.

[26]  Yongchuan Tang,et al.  Sensor Data Fusion Based on a New Conflict Measure , 2016 .

[27]  Kyung S. Park,et al.  A new method for estimating human error probabilities: AHP-SLIM , 2008, Reliab. Eng. Syst. Saf..

[28]  Jessica Calhoun,et al.  Human Reliability Analysis in Spaceflight Applications, Part 2: Modified CREAM for Spaceflight , 2014, Qual. Reliab. Eng. Int..

[29]  Luca Podofillini,et al.  Comparing the treatment of uncertainty in Bayesian networks and fuzzy expert systems used for a human reliability analysis application , 2015, Reliab. Eng. Syst. Saf..

[30]  Xiaozhi Hu,et al.  Effects of heterogeneity and load amplitude on fatigue rate prediction of a welded joint , 2016 .

[31]  Jianping Yuan,et al.  Uncertainty-based Optimization Algorithms in Designing Fractionated Spacecraft , 2016, Scientific Reports.

[32]  Erkan Celik,et al.  A modified human reliability analysis for cargo operation in single point mooring (SPM) off-shore units , 2016 .

[33]  Sankaran Mahadevan,et al.  Supplier selection based on evidence theory and analytic network process , 2016 .

[34]  Ali Mosleh,et al.  Phoenix - A model-based Human Reliability Analysis methodology: Qualitative Analysis Procedure , 2016, Reliab. Eng. Syst. Saf..

[35]  Richard Mollin,et al.  Number theory and applications , 1989 .

[36]  Yu Luo,et al.  An improved method to rank generalized fuzzy numbers with different left heights and right heights , 2015, J. Intell. Fuzzy Syst..

[37]  Jaewhan Kim,et al.  Analysis of an Operators' Performance Time and Its Application to a Human Reliability Analysis in Nuclear Power Plants , 2007, IEEE Transactions on Nuclear Science.

[38]  S. Mahadevan,et al.  Dependence Assessment in Human Reliability Analysis Using Evidence Theory and AHP , 2015, Risk analysis : an official publication of the Society for Risk Analysis.

[39]  Jurgita Antucheviciene,et al.  Selecting a Contractor by Using a Novel Method forMultiple Attribute Analysis: Weighted Aggregated SumProduct Assessment with Grey Values (WASPAS-G) , 2015 .

[40]  Shuen-Tai Ung,et al.  A weighted CREAM model for maritime human reliability analysis , 2015 .

[41]  Chunhe Xie,et al.  A visibility graph power averaging aggregation operator: A methodology based on network analysis , 2016, Comput. Ind. Eng..

[42]  Quan Pan,et al.  Adaptive imputation of missing values for incomplete pattern classification , 2016, Pattern Recognit..

[43]  Jean Dezert,et al.  Credal c-means clustering method based on belief functions , 2015, Knowl. Based Syst..

[44]  Poong Hyun Seong,et al.  Study on a new framework of Human Reliability Analysis to evaluate soft control execution error in advanced MCRs of NPPs , 2016 .

[45]  Luca Podofillini,et al.  Bayesian belief networks for human reliability analysis: A review of applications and gaps , 2015, Reliab. Eng. Syst. Saf..

[46]  Wen Jiang,et al.  An evidential sensor fusion method in fault diagnosis , 2016 .

[47]  Jianping Yuan,et al.  Coordinated Parameter Identification Technique for the Inertial Parameters of Non-Cooperative Target , 2016, PloS one.

[48]  Sankaran Mahadevan,et al.  A fuzzy extended analytic network process-based approach for global supplier selection , 2015, Applied Intelligence.

[49]  Chao Wang,et al.  Fuzzy Evaluation of Network Vulnerability , 2016, Qual. Reliab. Eng. Int..

[50]  Ronald R. Yager,et al.  On the fusion of non-independent belief structures , 2009, Int. J. Gen. Syst..

[51]  Melike Erdogan,et al.  Evaluating Alternative-Fuel Busses for Public Transportation in Istanbul Using Interval Type-2 Fuzzy AHP and TOPSIS , 2016, J. Multiple Valued Log. Soft Comput..

[52]  Chun-Yu Lin,et al.  An Integrated Decision-Making Model for the Location of a PV Solar Plant , 2015 .

[53]  Sankaran Mahadevan,et al.  A non-parametric method to determine basic probability assignment for classification problems , 2014, Applied Intelligence.

[54]  E. Zavadskas,et al.  The Interval-Valued Intuitionistic Fuzzy MULTIMOORA Method for Group Decision Making in Engineering , 2015 .

[55]  Jessica Calhoun,et al.  Human Reliability Analysis in Spaceflight Applications , 2013, Qual. Reliab. Eng. Int..

[56]  Yong Hu,et al.  A novel method to use fuzzy soft sets in decision making based on ambiguity measure and Dempster-Shafer theory of evidence: An application in medical diagnosis , 2016, Artif. Intell. Medicine.

[57]  Fuyuan Xiao,et al.  Weighted Evidence Combination Based on Distance of Evidence and Entropy Function , 2016, Int. J. Distributed Sens. Networks.

[58]  Y. Hu,et al.  Investigation of unsteady aerodynamics effects in cycloidal rotor using RANS solver , 2016, The Aeronautical Journal.

[59]  Feng Lian,et al.  Distributed compressed sensing based joint detection and tracking for multistatic radar system , 2016, Inf. Sci..

[60]  Yong Deng,et al.  D-CFPR: D numbers extended consistent fuzzy preference relations , 2014, Knowl. Based Syst..

[61]  Yong Hu,et al.  A novel distance function of D numbers and its application in product engineering , 2016, Eng. Appl. Artif. Intell..

[62]  Yong Deng,et al.  Generalized evidence theory , 2014, Applied Intelligence.

[63]  Sankaran Mahadevan,et al.  Combining dependent bodies of evidence , 2015, Applied Intelligence.

[64]  Gülçin Büyüközkan,et al.  Evaluation of product development partners using an integrated AHP-VIKOR model , 2015, Kybernetes.

[65]  Yang Gao,et al.  Adequate is better: particle swarm optimization with limited-information , 2015, Appl. Math. Comput..

[66]  Yuan Haiwen,et al.  An Integrated Decision-Making Model for Transformer Condition Assessment Using Game Theory and Modified Evidence Combination Extended by D Numbers , 2016 .

[67]  F. Chan,et al.  Global supplier development considering risk factors using fuzzy extended AHP-based approach , 2007 .

[68]  Wen Jiang,et al.  A Method to Determine Generalized Basic Probability Assignment in the Open World , 2016 .

[69]  Jaewhan Kim,et al.  Design-related influencing factors of the computerized procedure system for inclusion into human reliability analysis of the advanced control room , 2013 .