Characterisation of Mn0·7Zn0·3Fe2O4 nanoparticles prepared by two stage annealing

Abstract Nanoparticles of the spinel ferrite Mn0·7Zn0·3Fe2O4, with potential for use as contrast agents for magnetic resonance imaging applications, have been prepared by a sol–gel method followed by a two stage annealing process. The second stage of the annealing process improved the quality of the nanoparticles but also led to intergrown aggregates. The nanoparticles were milled to reduce this aggregation. After hand milling, the average nanoparticle size was 20 nm and after 5 h ball milling, the average nanoparticle size was 10 nm. The principal objectives of this study were to assess the effects of the two stage annealing process and milling on average nanoparticle size, crystal quality and magnetic properties relating to potential use in magnetic resonance imaging. Preliminary cytotoxicity measurements enabled assessment of possible nanoparticle contamination during milling on potential medical and clinical applications. A special surfactant was modified to disperse the nanoparticles in water and render them hydrophilic and to reduce agglomeration.

[1]  R. Misra,et al.  Magnetic drug-targeting carrier encapsulated with thermosensitive smart polymer: core-shell nanoparticle carrier and drug release response. , 2007, Acta biomaterialia.

[2]  Yongmin Chang,et al.  Water-soluble MnO nanocolloid for a molecular T1 MR imaging: a facile one-pot synthesis, in vivo T1 MR images, and account for relaxivities. , 2010, ACS applied materials & interfaces.

[3]  T. Ng,et al.  T1 and T2 relaxivities of succimer-coated MFe23+O4 (M=Mn2+, Fe2+ and Co2+) inverse spinel ferrites for potential use as phase-contrast agents in medical MRI , 2009 .

[4]  D. Litvinov,et al.  Light-induced covalent immobilization of monolayers of magnetic nanoparticles on hydrogen-terminated silicon. , 2010, ACS applied materials & interfaces.

[5]  M. Desco,et al.  A new method for the rapid synthesis of water stable superparamagnetic nanoparticles. , 2008, Chemistry.

[6]  Chunhua Yan,et al.  The sol-gel preparation and AFM study of spinel CoFe2O4 thin film , 1999 .

[7]  Yu Zhang,et al.  Effect of surface charge and agglomerate degree of magnetic iron oxide nanoparticles on KB cellular uptake in vitro. , 2009, Colloids and surfaces. B, Biointerfaces.

[8]  Aaron Peled,et al.  Synthesis of nanoparticles in the gas phase for electronic, optical and magnetic applications—a review , 1998 .

[9]  M. Torres-Lugo,et al.  Synthesis and characterization of carboxymethyl dextran-coated Mn/Zn ferrite for biomedical applications , 2009 .

[10]  Hua Ai,et al.  Manganese ferrite nanoparticle micellar nanocomposites as MRI contrast agent for liver imaging. , 2009, Biomaterials.

[11]  R. Misra,et al.  Enhanced antibactericidal function of W4+-doped titania-coated nickel ferrite composite nanoparticles: a biomaterial system. , 2008, Acta biomaterialia.

[12]  D. Ziessow,et al.  Error analysis for optimized inversion recovery spin-lattice relaxation measurements , 1977 .

[13]  Yu Zhang,et al.  Preparation and characterization of water-soluble monodisperse magnetic iron oxide nanoparticles via surface double-exchange with DMSA , 2008 .

[14]  A. Gupta,et al.  Surface-modified superparamagnetic nanoparticles for drug delivery: preparation, characterization, and cytotoxicity studies , 2004, IEEE Transactions on NanoBioscience.

[15]  R. Misra,et al.  Antimicrobial function of Nd3+-doped anatase titania-coated nickel ferrite composite nanoparticles: a biomaterial system. , 2006, Acta biomaterialia.

[16]  P. Tchounwou,et al.  Dose- and Time-Dependent Response of Human Leukemia (HL-60) Cells to Arsenic Trioxide Treatment , 2006, International journal of environmental research and public health.

[17]  R. Hong,et al.  Preparation and characterization of silica-coated Fe3O4 nanoparticles used as precursor of ferrofluids , 2009 .

[18]  S. Margel,et al.  Synthesis and characterization of Fe and Fe3O4 nanoparticles by thermal decomposition of triiron dodecacarbonyl , 2009 .

[19]  R. Misra,et al.  On the suitability of nanocrystalline ferrites as a magnetic carrier for drug delivery: functionalization, conjugation and drug release kinetics. , 2007, Acta biomaterialia.

[20]  Xiaohan Liu,et al.  Magnetic and high rate adsorption properties of porous Mn(1-x)Zn(x)Fe2O4 (0 ≤ x ≤ 0.8) adsorbents. , 2011, Journal of Colloid and Interface Science.

[21]  R. Misra,et al.  Anti-microbial active composite nanoparticles with magnetic core and photocatalytic shell: TiO2-NiFe2O4 biomaterial system. , 2005, Acta biomaterialia.

[22]  Dong-Hwang Chen,et al.  Synthesis of nickel ferrite nanoparticles by sol-gel method , 2001 .

[23]  M. Lees,et al.  Effect of the hybrid composition on the physicochemical properties and morphology of iron oxide–gold nanoparticles , 2012, Journal of Nanoparticle Research.

[24]  J. Varela,et al.  A novel synthesis of perovskite bismuth ferrite nanoparticles , 2011 .

[25]  R. Misra,et al.  Core-shell magnetite nanoparticles surface encapsulated with smart stimuli-responsive polymer: synthesis, characterization, and LCST of viable drug-targeting delivery system. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[26]  R. Arulmurugan,et al.  Mn–Zn ferrite nanoparticles for ferrofluid preparation: Study on thermal–magnetic properties , 2006 .

[27]  K. Venkatakrishnan,et al.  Synthesis of magnetic nanofibers using femtosecond laser material processing in air , 2011, Nanoscale research letters.

[28]  J. Liu,et al.  Zinc ferrite nanoparticles as MRI contrast agents. , 2008, Chemical communications.

[29]  W. Stark,et al.  Synthesis and Covalent Surface Functionalization of Nonoxidic Iron Core−Shell Nanomagnets , 2009 .

[30]  R. Misra,et al.  Comparative study of antimicrobial and photocatalytic activity in titania encapsulated composite nanoparticles with different dopants , 2008 .

[31]  T. Miyazaki,et al.  The Physics of Ferromagnetism , 2012 .

[32]  Mahavir Singh,et al.  Preparation and characterization of nanosize Mn0.4Zn0.6 Fe2O4 ferrite by citrate precursor method , 2003 .