A new approach to evaluate irradiation hardening of ion-irradiated ferritic alloys by nano-indentation techniques

Abstract The present work investigates the irradiation hardening of Fe-based model ferritic alloys after Fe-ion irradiation experiments in order to deduce mechanistically based nominal hardness from the nano-indentation tests on the ion-irradiated surface. Ion-irradiation experiments were carried out at 290 °C with 6.4 MeV Fe3+ ions. The constant stiffness measurement (CSM) was used to obtain the depth-profile of hardness. The results has been analyzed and discussed based on the Nix–Gao model and an extended film/substrate system hardness model. The depth-sensing nano-indentation techniques with CSM revealed that the hardness gradient of the unirradiated Fe-based model alloy can be explained through the indentation size effect (ISE). On the other hand, the gradient of ion-irradiated surface of these samples includes not only the ISE but also softer substrate effect (SSE). We propose a new approach to evaluate a nominal hardness, which may connect to the bulk hardness, from experimentally obtained nano-hardness depth profile data.

[1]  Gao Yi-fei,et al.  INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS OF METALLIC MATERIALS , 2003 .

[2]  A. Kohyama,et al.  Helium effects on mechanical properties and microstructure of high fluence ion-irradiated RAFM steel , 2007 .

[3]  A. Kohyama,et al.  Radiation and helium effects on microstructures, nano-indentation properties and deformation behavior in ferrous alloys , 2003 .

[4]  G. Pharr,et al.  The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations , 2010 .

[5]  A. Kimura,et al.  Irradiation Hardening and Microstructure Evolution of Ion-irradiated ODS Ferritic Steels , 2007 .

[6]  A. Kohyama,et al.  Evaluation of hardening behaviour of ion irradiated reduced activation ferritic/martensitic steels by an ultra-micro-indentation technique , 2002 .

[7]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[8]  A. Kohyama,et al.  Irradiation-induced hardening mechanism of ion irradiated JLF-1 to high fluences , 2006 .

[9]  Steven J. Zinkle,et al.  Mechanical property measurements on ion-irradiated copper and Cu-Zr , 1986 .

[10]  F. Bergner,et al.  Ion-irradiation-induced damage of steels characterized by means of nanoindentation , 2009 .

[11]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[12]  A. Kohyama,et al.  A new Multiple Beams–Material Interaction Research Facility for radiation damage studies in fusion materials , 2000 .

[13]  J. Maniks,et al.  Effect of substrate hardness and film structure on indentation depth criteria for film hardness testing , 2008 .

[14]  S. Wakayama,et al.  Characterization of mechanical properties and microstructure of high-energy dual ion implanted metals , 2001 .

[15]  A. Kimura,et al.  Evaluation of Irradiation Hardening of Fe-Ion Irradiated F82H by Nano-Indentation Techniques , 2010 .

[16]  C. Shin,et al.  Evaluation of the depth-dependent yield strength of a nanoindented ion-irradiated Fe–Cr model alloy by using a finite element modeling , 2009 .

[17]  A. Kohyama,et al.  The influence of helium co-implantation on ion-induced hardening of low activation ferritic steel evaluated by micro-indentation technique , 1999 .