Structural-acoustic optimization of composite sandwich structures : A review

We review recent advances in the area of composite sandwich modeling, sensitivity analyses, optimization techniques and applications, with the focus on structural-acoustic problems. The optimization of sandwich structures is with respect to passive design parameters, such as material constants, geometric parameters, cellular core geometry and boundary conditions.

[1]  Jeawon Lee,et al.  Topology optimization for the radiation and scattering of sound from thin-body using genetic algorithms , 2004 .

[2]  A. C. Nilsson,et al.  PREDICTION AND MEASUREMENT OF SOME DYNAMIC PROPERTIES OF SANDWICH STRUCTURES WITH HONEYCOMB AND FOAM CORES , 2002 .

[3]  Jingzhou Yang,et al.  A hybrid topology optimization algorithm for structural design , 2005 .

[4]  Sachin S. Sapatnekar,et al.  Design by optimization , 2009 .

[5]  David Kennedy,et al.  Hybrid Optimization Strategy Beyond Local Optima in Aerospace Panel Designs , 1999 .

[6]  T. Buhl.  Simultaneous topology optimization of structure and supports , 2002 .

[7]  Martin Ochmann,et al.  Boundary Element Acoustics Fundamentals and Computer Codes , 2002 .

[8]  Massimo Ruzzene,et al.  Structural-acoustic optimization of sandwich panels , 2005 .

[9]  Tarun Kant,et al.  Estimation of transverse/interlaminar stresses in laminated composites – a selective review and survey of current developments , 2000 .

[10]  Koorosh Naghshineh,et al.  Element free structural acoustics for efficient shape optimization , 2005 .

[11]  Pasi Tanskanen,et al.  The evolutionary structural optimization method: theoretical aspects , 2002 .

[12]  Mohamad S. Qatu,et al.  Recent research advances in the dynamic behavior of shells: 1989–2000, Part 2: Homogeneous shells , 2002 .

[13]  Frédéric Magoulès,et al.  Studies of an infinite element method for acoustical radiation , 2006 .

[14]  Hiroyuki Matsunaga,et al.  VIBRATION AND BUCKLING OF MULTILAYERED COMPOSITE BEAMS ACCORDING TO HIGHER ORDER DEFORMATION THEORIES , 2001 .

[15]  Dahsin Liu,et al.  Zigzag theory for composite laminates , 1995 .

[16]  N. Olhoff,et al.  Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives , 1999 .

[17]  J.-S. Sun,et al.  A Generalized Infinite Element for Acoustic Radiation , 2005 .

[18]  Andy J. Keane,et al.  Passive vibration control of a satellite boom structure by geometric optimization using genetic algorithm , 2003 .

[19]  Keiichi Motoyama,et al.  Optimization Approach for Reducing Sound Power from a Vibrating Plate by Its Curvature Design(Special Issue on Advances in Dynamics and Design of Continuous Systems) , 2002 .

[20]  Michael D. Grissom,et al.  A reduced eigenvalue method for broadband analysis of a structure with vibration absorbers possessing rotatory inertia , 2005 .

[21]  Kenneth A. Cunefare,et al.  Structural Acoustic Optimization of a Composite Cylindrical Shell Using FEM/BEM , 2000, Noise Control and Acoustics.

[22]  Stephen J. Elliott,et al.  The radiation efficiency grouping of free-space acoustic radiation modes , 2001 .

[23]  Alexander Tessler,et al.  A {3,2}-order bending theory for laminated composite and sandwich beams , 1998 .

[24]  S. Bulman,et al.  Constrained adaptive topology optimization for vibrating shell structures , 2001 .

[25]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[26]  Grant P. Steven,et al.  Effect of initial nondesign domain on optimal topologies of structures during natural frequency optimization , 1997 .

[27]  S. M. Kirkup,et al.  Solution of Helmholtz Equation in the Exterior Domain by Elementary Boundary Integral Methods , 1995 .

[28]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[29]  Ahmed K. Noor,et al.  Assessment of continuum models for sandwich panel honeycomb cores , 1997 .

[30]  Ronald C. Averill,et al.  Development of simple, robust finite elements based on refined theories for thick laminated beams , 1996 .

[31]  R. C. Averill,et al.  C0 zig-zag finite element for analysis of laminated composite beams , 1999 .

[32]  R. P. Shimpi,et al.  A Review of Refined Shear Deformation Theories for Isotropic and Anisotropic Laminated Beams , 2001 .

[33]  T. Hughes,et al.  A cost comparison of boundary element and finite element methods for problems of time-harmonic acoustics , 1992 .

[34]  Colin H. Hansen,et al.  Effect Of End Conditions On The Active Control Of Beam Vibration , 1993 .

[35]  Hiroyuki Matsunaga,et al.  Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory , 2000 .

[36]  Massimo Ruzzene,et al.  Structural-acoustic optimization of sandwich panels , 2005 .

[37]  Tarun Kant,et al.  Transient dynamics of laminated beams: an evaluation with a higher-order refined theory , 1998 .

[38]  Jian-Qiao Sun,et al.  Structural-Acoustic Studies of Sandwich Structures: A Review , 2001 .

[39]  Grégoire Allaire,et al.  Eigenfrequency optimization in optimal design , 2001 .

[40]  M. Gherlone,et al.  Multiconstrained optimization of laminated and sandwich plates using evolutionary algorithms and higher-order plate theories , 2003 .

[41]  Hiroyuki Matsunaga,et al.  Interlaminar stress analysis of laminated composite beams according to global higher-order deformation theories , 2002 .

[42]  Dongwei Shu,et al.  Modelling of Young's modulus of foams , 2001 .

[43]  A. Tessler,et al.  Vibration of thick laminated composite plates , 1995 .

[44]  Mogens Ohlrich,et al.  On the influence of boundary constraints and angled baffle arrangements on sound radiation from rectangular plates , 2004 .

[45]  K. Demirli,et al.  Boundary conditioning for structural tuning using fuzzy logic approach , 2000 .

[46]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[47]  Kyung K. Choi,et al.  Structural sensitivity analysis and optimization , 2005 .

[48]  Ahmed K. Noor,et al.  Hierarchical adaptive modeling of structural sandwiches and multilayered composite panels , 1994 .

[49]  Raphael T. Haftka,et al.  Efficient single-level solution of hierarchical problems in structural optimization , 1987 .

[50]  Qiang Yu,et al.  Optimization approach for reducing sound power from a vibrating plate by its curvature design : Advanced in dynamics and design of continuous systems , 2002 .

[51]  Ashok D. Belegundu,et al.  Analytical Sensitivity of Acoustic Power Radiated from Plates , 1995 .

[52]  Y. Xie,et al.  Improving efficiency of evolutionary structural optimization by implementing fixed grid mesh , 2002 .

[53]  Paolo Gaudenzi,et al.  An evaluation of higher-order effects on the eigenfrequencies of composite structures , 1999 .

[54]  Priya Thamburaj.  Structural-acoustic studies of sandwich structures for global transport aircraft , 2001 .

[55]  Z. Reut.  Numerical solution of acoustic problems by integral equations , 1989 .

[56]  Michael Yu Wang,et al.  Design of multimaterial compliant mechanisms using level-set methods , 2005 .

[57]  Massimo Ruzzene.  Vibration and sound radiation of sandwich beams with honeycomb truss core , 2004 .

[58]  John W. Hutchinson,et al.  Optimal truss plates , 2001 .

[59]  Tsu-Wei Chou,et al.  Microstructural design of fiber composites: Short-fiber composites , 1992 .

[60]  Marco Gherlone,et al.  A global/local third-order Hermitian displacement field with damaged interfaces and transverse extensibility: FEM formulation , 2003 .

[61]  Grant P. Steven,et al.  Evolutionary natural frequency optimization of two‐dimensional structures with additional non‐structural lumped masses , 1997 .

[62]  E. Carrera.  A study of transverse normal stress effect on vibration of multilayered plates and shells , 1999 .

[63]  M. Y. Wang,et al.  An enhanced genetic algorithm for structural topology optimization , 2006 .

[64]  Andy J. Keane,et al.  Passive vibration control via unusual geometries: experiments on model aerospace structures , 1996 .

[65]  Y. G. Xu,et al.  Hybrid evolutionary algorithm and application to structural optimization , 2005 .

[66]  Erik Lund,et al.  Finite Element Based Engineering Design Sensitivity Analysis and Optimization , 1995 .

[67]  John S. Lamancusa,et al.  Design optimization methods for rectangular panels with minimal sound radiation , 1992 .

[68]  Yii-Mei Huang,et al.  Optimal design of dynamic absorbers on vibration and noise control of the fuselage , 2000 .

[69]  Noboru Kikuchi,et al.  Unified topology design of static and vibrating structures using multiobjective optimization , 2000 .

[70]  A. Belegundu,et al.  Material tailoring of structures to achieve a minimum radiation condition , 1992 .

[71]  W. Hufenbach,et al.  Material-Adapted Design of Textile-Reinforced Composite Structures with Optimized Vibro-Acoustic and Damping Properties Including Shear Effects , 2005 .

[72]  Paolo Gaudenzi,et al.  MULTI-LAYER HIGHER-ORDER FINITE ELEMENTS FOR THE ANALYSIS OF FREE-EDGE STRESSES IN COMPOSITE LAMINATES , 1998 .

[73]  L Feng,et al.  Experimental study of structure-borne sound transmission loss of mechanical joints. , 2001, The Journal of the Acoustical Society of America.

[74]  Yi Min Xie,et al.  A method for varying the number of cavities in an optimized topology using Evolutionary Structural Optimization , 2000 .

[75]  Alexander Tessler,et al.  An improved plate theory of {1,2}-order for thick composite laminates , 1993 .

[76]  S. Ju,et al.  A symmetric formulation of coupled BEM/FEM in solving responses of submerged elastic structures for large degrees of freedom , 2000 .

[77]  H. C. Rodrigues,et al.  A material optimization model to approximate energy bounds for cellular materials under multiload conditions , 2003 .

[78]  Jian-Qiao Sun,et al.  Normalizations in acoustic optimization with Rayleigh integral , 2005 .

[79]  Hiroyuki Matsunaga,et al.  Assessment of a global higher-order deformation theory for laminated composite and sandwich plates , 2002 .

[80]  Kyung K. Choi,et al.  Design Optimization for Structural-Acoustic Problems Using FEA-BEA With Adjoint Variable Method , 2004 .

[81]  Steffen Marburg,et al.  EXPERIMENTAL VERIFICATION OF STRUCTURAL-ACOUSTIC MODELLING AND DESIGN OPTIMIZATION , 2002 .

[82]  Tarun Kant,et al.  A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches , 1993 .

[83]  N. Vlahopoulos,et al.  A numerical structure-borne noise prediction scheme based on the boundary element method, with a new formulation for the singular integrals , 1994 .

[84]  Erasmo Carrera,et al.  Single- vs Multilayer Plate Modelings on the Basis of Reissner's Mixed Theorem , 2000 .

[85]  Massimo Ruzzene,et al.  Wave beaming effects in two-dimensional cellular structures , 2003 .

[86]  M. Castaings,et al.  Guided waves propagating in sandwich structures made of anisotropic, viscoelastic, composite materials. , 2003, The Journal of the Acoustical Society of America.

[87]  K. H. Lee,et al.  An improved zig-zag model for the bending of laminated composite shells , 1990 .

[88]  M. Jakiela,et al.  Continuum structural topology design with genetic algorithms , 2000 .

[89]  J. L. Marcelin.  Genetic Optimization of Supports in Vibrating Structures , 2002 .

[90]  Fabrizio Scarpa,et al.  Theoretical characteristics of the vibration of sandwich plates with in-plane negative poisson's ratio values , 2000 .

[91]  Noboru Kikuchi,et al.  Optimal topology design of structures under dynamic loads , 1999 .

[92]  Ion Stiharu,et al.  BOUNDARY CONDITIONING TECHNIQUE FOR STRUCTURAL TUNING , 1999 .

[93]  Andy J. Keane,et al.  Passive vibration control via unusual geometries: the application of genetic algorithm optimization to structural design , 1995 .

[94]  Michael D. Grissom,et al.  Conjoint-analysis-based multiattribute optimization: application in acoustical design , 2006 .

[95]  Shinji Nishiwaki,et al.  Topological design considering flexibility under periodic loads , 2000 .

[96]  John D. Whitcomb,et al.  Application of iterative global/local finite-element analysis. Part 1: Linear analysis , 1993 .

[97]  Huang Wen-chao,et al.  Sound insulation improvement using honeycomb sandwich panels , 1998 .

[98]  J. Reddy.  An evaluation of equivalent-single-layer and layerwise theories of composite laminates , 1993 .

[99]  Jian-Qiao Sun,et al.  Optimization of Boundary Supports for Sound Radiation Reduction of Vibrating Structures , 2008 .

[100]  Niels Leergaard Pedersen,et al.  An optimality criterion for shape optimization in eigenfrequency problems , 2005 .

[101]  K. Lam,et al.  FINITE ELEMENT VIBRATION ANALYSIS OF COMPOSITE BEAMS BASED ON HIGHER-ORDER BEAM THEORY , 1999 .

[102]  Steffen Marburg,et al.  FEM-BEM-coupling and structural-acoustic sensitivity analysis for shell geometries , 2005 .

[103]  Jian-Qiao Sun,et al.  Structural-acoustic optimization of sandwich structures with cellular cores for minimum sound radiation , 2007 .

[104]  Grant P. Steven,et al.  A generalized evolutionary method for natural frequency optimization of membrane vibration problems in finite element analysis , 1998 .

[105]  S. Marburg.  A general concept for design modification of shell meshes in structural-acoustic optimization: part I: Formulation of the concept , 2002 .

[106]  J. N. Reddy,et al.  An efficient computational model for the stress analysis of smart plate structures , 1996 .

[107]  Kyung K. Choi,et al.  Design sensitivity analysis for sequential structural–acoustic problems , 2003 .

[108]  Mei Yulin,et al.  A level set method for structural topology optimization and its applications , 2004 .

[109]  Niels Leergaard Pedersen,et al.  Designing plates for minimum internal resonances , 2005 .

[110]  Anthony Roberts,et al.  Elastic moduli of model random three-dimensional closed-cell cellular solids , 2000 .

[111]  Youn-sik Park,et al.  OPTIMAL SUPPORT POSITIONS FOR A STRUCTURE TO MAXIMIZE ITS FUNDAMENTAL NATURAL FREQUENCY , 1998 .

[112]  C. Jog.  Topology design of structures subjected to periodic loading , 2002 .

[113]  C. Bert,et al.  The behavior of structures composed of composite materials , 1986 .

[114]  R. C. Averill,et al.  Thick beam theory and finite element model with zig-zag sublaminate approximations , 1996 .

[115]  Grant P. Steven,et al.  Evolutionary structural optimization for dynamic problems , 1996 .

[116]  Dmitri Tcherniak,et al.  Topology optimization of resonating structures using SIMP method , 2002 .

[117]  F. Belblidia,et al.  A hybrid topology optimization algorithm for static and vibrating shell structures , 2002 .

[118]  J. N. Reddy,et al.  Recovery of interlaminar stresses and strain energy release rates in composite laminates , 1999 .

[119]  Erasmo Carrera,et al.  A priori vs. a posteriori evaluation of transverse stresses in multilayered orthotropic plates , 2000 .

[120]  J OsherStanley,et al.  Level set methods for optimization problems involving geometry and constraints I. Frequencies of a two-density inhomogeneous drum , 2001 .

[121]  Mohamad S. Qatu,et al.  Recent research advances in the dynamic behavior of shells: 1989-2000, Part 1: Laminated composite shells , 2002 .

[122]  H. A. Schenck.  Improved Integral Formulation for Acoustic Radiation Problems , 1968 .

[123]  Ronald C. Averill,et al.  An improved theory and finite-element model for laminated composite and sandwich beams using first-order zig-zag sublaminate approximations , 1997 .

[124]  Andy J. Keane,et al.  ROBUSTNESS OF OPTIMAL DESIGN SOLUTIONS TO REDUCE VIBRATION TRANSMISSION IN A LIGHTWEIGHT 2-D STRUCTURE, PART I: GEOMETRIC DESIGN , 2000 .

[125]  C. M. Dakshina Moorthy,et al.  Modelling of laminates using a layerwise element with enhanced strains , 1998 .

[126]  S. Marburg,et al.  A general concept for design modification of shell meshes in structural-acoustic optimization: part II: Application to a floor panel in sedan interior noise problems , 2002 .

[127]  J. S. Lamancusa,et al.  SOUND POWER MINIMIZATION OF CIRCULAR PLATES THROUGH DAMPING LAYER PLACEMENT , 1998 .

[128]  P. Prendergast,et al.  Examination of acoustic behavior of negative poisson's ratio materials , 1991 .

[129]  Danniella Muheim Thompson,et al.  Verification of a 2-D to 3-D Global/Local Finite Element Method for Symmetric Laminates , 1992 .

[130]  S. Sahraoui,et al.  Linear elastic properties of anisotropic open-cell foams. , 2001, The Journal of the Acoustical Society of America.

[131]  Ugo Icardi,et al.  Numerical assessment of the core deformability effect on the behavior of sandwich beams , 1999 .

[132]  Tongan Wang,et al.  Assessment of sandwich models for the prediction of sound transmission loss in unidirectional sandwich panels , 2005 .

[133]  Tian Jian Lu,et al.  Multi-objective and multi-loading optimization of ultralightweight truss materials , 2004 .

[134]  Jahau Lewis Chen,et al.  Application of genetic algorithm for the support location optimization of beams , 1994 .

[135]  Roderic S. Lakes,et al.  Composites with Inclusions of Negative Bulk Modulus: Extreme Damping and Negative Poisson’s Ratio , 2005 .

[136]  N. L. Pedersen.  Maximization of eigenvalues using topology optimization , 2000 .

[137]  G. Allaire,et al.  A level-set method for vibration and multiple loads structural optimization , 2005 .

[138]  John D. Whitcomb,et al.  Application of iterative global/local finite-element analysis. Part 2: Geometrically non-linear analysis , 1993 .

[139]  Huseyin Denli,et al.  Minimization of Acoustic Radiation from Composite Sandwich Structures , 2005 .

[140]  D. Tortorelli,et al.  Design sensitivity analysis: Overview and review , 1994 .

[141]  J. N. Reddy,et al.  Variable Kinematic Modelling of Laminated Composite Plates , 1996 .

[142]  S. A. Yang.  An integral equation approach to three-dimensional acoustic radiation and scattering problems , 2004 .

[143]  K. Cunefare.  The minimum multimodal radiation efficiency of baffled finite beams , 1991 .

[144]  Eric Constans,et al.  THE USE OF MODAL TAILORING TO MINIMIZE THE RADIATED SOUND POWER OF VIBRATING SHELLS: THEORY AND EXPERIMENT , 1998 .

[145]  Ronald C. Averill,et al.  First-order zig-zag sublaminate plate theory and finite element model for laminated composite and sandwich panels , 2000 .

[146]  Emmanuel Maitre,et al.  Level set methods for optimization problems involving geometry and constraints II. Optimization over a fixed surface , 2008, J. Comput. Phys..

[147]  Tarun Kant,et al.  FREE VIBRATION ANALYSIS OF FIBER REINFORCED COMPOSITE BEAMS USING HIGHER ORDER THEORIES AND FINITE ELEMENT MODELLING , 1996 .

[148]  Christian Soize,et al.  Structural shape parametric optimization for an internal structural-acoustic problem , 2000 .