论文信息 - A New Precision Digital Phase Meter and Its Simple Calibration Method

A New Precision Digital Phase Meter and Its Simple Calibration Method

A digital phase meter (DPM) for power frequencies with a very low measurement uncertainty of 1 ¿rad was developed at Japan Electric Meters Inspection Corporation (JEMIC) to establish a power and energy calibration system. We also developed a phase meter calibrator (PMC) for calibrating the DPM. Since the DPM and PMC are synchronized with a single clock, the DPM can be calibrated by a very simple measurement method, which no longer requires extra standards. The DPM has been employed as an instrument for the primary standard of power and energy in Japan to achieve precise phase angle measurement. Since the error in the power measurement at power factor 0 is equal to the error in the phase angle measurement, we verified the performance of the DPM by calibrating a standard power meter using the power calibrators at JEMIC and Physikalische-Technische Bundesanstalt (PTB), and comparing the test results at power factor 0. According to the measurement, the phase angle difference between JEMIC and PTB is within 7 ¿rad.

J. Kawagoe | T. Kawasaki

[1] Eddy So,et al. A Current-Comparator-Based System for Calibrating Active/Reactive Power and Energy Meters , 1983, IEEE Transactions on Instrumentation and Measurement.

[2] T. S. Rathore. Theorems on power, mean and RMS values of uniformly sampled periodic signals , 1984 .

[3] Harald Moser,et al. A new scheme for generating and measuring active, reactive, and apparent power at power frequencies with uncertainties of 2.5×10 -6 , 1998, IEEE Trans. Instrum. Meas..

[4] Terumitsu Shirai. Changes in AC Power Standard in Japan , 2008 .

[5] E. So,et al. Intercomparison of Calibration Systems for Ac Shunts up to Audio Frequencies , 2004, 2004 Conference on Precision Electromagnetic Measurements.

[6] Deshi Zhang,et al. A new power standard for audio-frequency measurements , 1990 .

[7] T. Tsuchiyama,et al. Development of a high precision AC standard shunt for AC power measurement , 2002, Conference Digest Conference on Precision Electromagnetic Measurements.

[8] E. So,et al. A Digital System for Calibrating Active/Reactive Power and Energy Meters , 2004, 2004 Conference on Precision Electromagnetic Measurements.