论文信息 - High-frequency EMTP model of transformer windings

High-frequency EMTP model of transformer windings

An EMTP model is presented for calculating overvoltage in transformer windings under VFTO in this paper. Firstly, the voltage transfer functions are calculated from the S parameters which are measured by network analyzer or calculated from the distributed parameters of transformer windings. Secondly, the voltage transfer functions are fitted with rational functions by vector fitting codes and then the rational transfer functions are order-reduced by Fade approximation. Lastly, the resultant voltage transfer functions are synthesized by the elements in EMTP. The calculated voltages from the circuit by EMTP are in good agreement with the measured voltages. This shows that the method is simple and robust

[1] Enrique E. Mombello,et al. Closure to discussion of 'New power transformer model for the calculation of electromagnetic resonant transient phenomena including frequency-dependent losses' , 2000 .

[2] Y. Shibuya,et al. High frequency model and transient response of transformer windings , 2002, IEEE/PES Transmission and Distribution Conference and Exhibition.

[3] G. C. Paap,et al. Computation of Very Fast Transient Overvoltages in Transformer Windings , 2002, IEEE Power Engineering Review.

[4] Cui Xiang. MODELING OF WIDE FREQUENCY CHARACTERISTIC OF POTENTIAL TRANSFORMER , 2003 .

[5] Y. Shibuya,et al. Experimental investigation of high frequency voltage oscillation in transformer windings , 1998 .

[6] A. Semlyen,et al. Rational approximation of frequency domain responses by vector fitting , 1999 .

[7] Ramachandra Achar,et al. Simulation of high-speed interconnects , 2001, Proc. IEEE.