Optical fiber Bragg grating hydrogen sensor based on evanescent-field interaction with palladium thin-film transducer

Abstract Fiber Bragg grating (FBG) sensors in single-mode optical fibers are widely applied for measurement of temperature and strain. If exposing FBG sensors to an external analyte by planar side-polishing technique of the fiber, evanescent-field interaction yields a Bragg wavelength shift also by changing the refractive index of the analyte. Deposition of sensor-specific transducer layers on the side-polished fiber can specify this spectrally encoding and network-capable optochemical fiber Bragg grating refractometry to the monitoring of specific substances, absorbed gases and vapors. In this paper, the sensor principle is demonstrated for the example of a hydrogen gas sensor based on a palladium thin-film transducer. Hydrogen in 0.1–4% volume concentration range can be monitored by the spectral shift of the Bragg wavelength, which is caused by the decreasing complex refractive index of Pd with increasing absorption of hydrogen.

[1]  James S. Sirkis,et al.  Characterization of a fiber Bragg grating (FBG)-based palladium tube hydrogen sensor , 1999, Smart Structures.

[2]  Martin A. Putnam,et al.  Instrumentation for interrogating many-element fiber Bragg grating arrays , 1995, Smart Structures.

[3]  Hidemoto Nakagawa,et al.  A fiber-optic evanescent-wave hydrogen gas sensor using palladium-supported tungsten oxide , 2000 .

[4]  Roland Pitts,et al.  PROTECTIVE COATINGS FOR Pd-BASED HYDROGEN SENSORS , 2004 .

[5]  R. C. Hughes,et al.  Thin films of Pd/Ni alloys for detection of high hydrogen concentrations , 1992 .

[6]  Gerald Meltz,et al.  Fiber grating evanescent-wave sensors , 1996, Optics & Photonics.

[7]  Michael A. Butler,et al.  Micromirror optical-fiber hydrogen sensor , 1994 .

[8]  F. A. Lewis,et al.  The Palladium-Hydrogen System , 1967, Platinum Metals Review.

[9]  Wolfgang Ecke,et al.  Fiber Bragg grating sensor system for operational load monitoring of wind turbine blades , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Jirí Ctyroký.  Separation of refractive index and temperature measurements using surface plasmon-coupled fiber grating , 2000, International Conference on Optical Fibre Sensors.

[11]  Reinhardt Willsch,et al.  Matching of a Bent Step‐Index Single‐Mode Fiber by a Modal Equivalent Slab Waveguide Structure , 1994 .

[12]  Kwang Taek Kim,et al.  Hydrogen Sensor Based on Palladium Coated Side-Polished Single-Mode Fiber , 2007, IEEE Sensors Journal.

[13]  S Huang,et al.  Bragg intragrating structural sensing. , 1995, Applied optics.

[14]  Wolfgang Ecke,et al.  Modelling of the surface plasmon resonance waveguide sensor with Bragg grating , 1999 .

[15]  Ines Latka,et al.  Micro bending beam based optical fiber grating sensors for physical and chemical measurands , 2005, International Conference on Optical Fibre Sensors.

[16]  A. Trouillet,et al.  Hydrogen leak detection using an optical fibre sensor for aerospace applications , 2000 .

[17]  John P. Dakin,et al.  Improvement of the stability of fiber grating interrogation systems, using active and passive polarization scrambling devices , 1997 .

[18]  A. Trouillet,et al.  An integrated optic hydrogen sensor based on SPR on palladium , 2001 .

[19]  Reinhardt Willsch,et al.  A fibre Bragg grating refractometer , 2001 .

[20]  Anna Grazia Mignani,et al.  Solution concentration measurements by means of optical fiber long-period gratings , 1998, Optical Fibre Sensors.