Strategies for optimizing the opening of the outlet air circuit’s nozzle to improve the efficiency of the PEMFC generator

The aim of this study is the optimal dimensioning of the air circuit's outlet nozzle in relation with the load duration curve, for a given PEMFC generator, in order to maximize the PEMFC efficiency and to increase the net outlet power. The steady state PEMFC operation has been taken into account. The model of the PEMFC system used in the work is based on a moving least squares technique. A centrifugal compressor has been taken into account, and the operating line of the compressor has been evaluated for an optimal fixed opening of the outlet nozzle. A multi-level optimization procedure has been implemented to solve the optimization problem. The developed algorithm is useful to design an optimum air subsystem, reducing the number of the control variables and the consequences of the dynamic behavior of a controlled electric adjustable valve on the PEMFC performance. The results of the work can contribute to the improvement of the PEMFC generator reliability and of its cost/performance ratio.

[1]  Abdellatif Miraoui,et al.  Surrogate model for proton exchange membrane fuel cell (PEMFC) , 2008 .

[2]  Panos M. Pardalos,et al.  Equivalent formulations and necessary optimality conditions for the Lennard–Jones problem , 2002, J. Glob. Optim..

[3]  Joshua Cunningham,et al.  A Comparison of High-Pressure and Low-Pressure Operation of PEM Fuel Cell Systems , 2001 .

[4]  Maurizio Cirrincione,et al.  A prototype of a fuel cell PEM emulator based on a buck converter , 2009 .

[5]  Mohammad E. Taslim,et al.  Discharge Coefficient Measurements for Flow Through Compound-Angle Conical Holes with Cross-Flow , 2004 .

[6]  Huei Peng,et al.  SIMULATION AND ANALYSIS OF TRANSIENT FUEL CELL SYSTEM PERFORMANCE BASED ON A DYNAMIC REACTANT FLOW MODEL , 2002 .

[7]  Daniel R. Lewin,et al.  Model-based Control of Fuel Cells: (1) Regulatory Control , 2004 .

[8]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[9]  Ralph E. White,et al.  Steady-state operation of a compressor for a proton exchange membrane fuel cell system , 2000 .

[10]  T. Henriques,et al.  Increasing the efficiency of a portable PEM fuel cell by altering the cathode channel geometry: A numerical and experimental study , 2010 .

[11]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[12]  S. Maharudrayya,et al.  Pressure losses in laminar flow through serpentine channels in fuel cell stacks , 2004 .

[13]  M. J. Khan,et al.  ANALYSIS OF A SMALL WIND-HYDROGEN STAND-ALONE HYBRID ENERGY SYSTEM , 2009 .

[14]  Jorge Nocedal,et al.  Algorithm 778: L-BFGS-B: Fortran subroutines for large-scale bound-constrained optimization , 1997, TOMS.

[15]  Abdellatif Miraoui,et al.  Surrogate modelling of compressor characteristics for fuel-cell applications , 2008 .

[16]  E H Law,et al.  Model-based control strategies in the dynamic interaction of air supply and fuel cell , 2004 .

[17]  Diego Feroldi,et al.  Performance improvement of a PEMFC system controlling the cathode outlet air flow , 2007 .

[18]  Simon Sansregret,et al.  Load duration curve: A tool for technico-economic analysis of energy solutions , 2008 .

[19]  Huei Peng,et al.  Model predictive control for starvation prevention in a hybrid fuel cell system , 2004, Proceedings of the 2004 American Control Conference.

[20]  M. Cali,et al.  Experimental analysis of cathode flow stoichiometry on the electrical performance of a PEMFC stack , 2007 .

[21]  Stephan Schmid,et al.  Fuel cells for automotive powertrains―A techno-economic assessment , 2009 .