Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites

Abstract A comprehensive set of thin-ply pseudo-ductile unidirectional interlayer hybrid composite materials comprising S-glass and a variety of thin carbon prepregs was designed and characterised. Unique elastic–yielding–hardening type stress–strain responses similar to those of ductile metals were achieved through fragmentation and stable pull-out of the carbon layers, generating a range of initial moduli, pseudo-yield strains, plateau stresses and pseudo ductile strains for the various configurations. The typical failure modes of thin-ply hybrid composites were highlighted in four series of stress–strain graphs obtained for the same materials with different carbon layer thicknesses. The predicted failure modes agreed well with the experimental results and demonstrated the merit of our two step design framework based on (i) simple analytical criteria and (ii) novel damage mode maps.

[1]  Michael R Wisnom,et al.  Demonstration of pseudo-ductility in high performance glass-epoxy composites by hybridisation with thin-ply carbon prepreg , 2013 .

[2]  K. Potter,et al.  A novel manufacturing method for aligned discontinuous fibre composites (High Performance-Discontinuous Fibre method) , 2014 .

[3]  S. Pinho,et al.  Exploring the potential of interleaving to delay catastrophic failure in unidirectional composites under tensile loading , 2015 .

[4]  L. Gorbatikh,et al.  Ductile steel fibre composites with brittle and ductile matrices , 2014 .

[5]  M. Wisnom,et al.  Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies , 2015 .

[6]  Michael D. Gilchrist,et al.  Manufacturing of Thermoplastic Composites from Commingled Yarns-A Review , 1998 .

[7]  L. Gorbatikh,et al.  Tensile behaviour of stainless steel fibre/epoxy composites with modified adhesion , 2015 .

[8]  P. Camanho,et al.  Notched response of non-crimp fabric thin-ply laminates , 2013 .

[9]  Jonathan D Fuller,et al.  Combining fibre rotation and fragmentation to achieve pseudo-ductile CFRP laminates , 2016 .

[10]  Hiroshi Saito,et al.  Effect of ply-thickness on impact damage morphology in CFRP laminates , 2011 .

[11]  K. Koziol,et al.  Enhancement of the mechanical properties of directly spun CNT fibers by chemical treatment. , 2011, ACS nano.

[12]  M. Wisnom,et al.  PSEUDO-DUCTILE BEHAVIOR OF UNIDIRECTIONAL FIBRE REINFORCED POLYAMIDE-12 COMPOSITE BY INTRA-TOW HYBRIDIZATION , 2012 .

[13]  S. Tsai,et al.  Experimental studies of thin-ply laminated composites , 2007 .

[14]  B. Harris,et al.  Hybrid carbon and glass fibre composites , 1974 .

[15]  Michael R Wisnom,et al.  Demonstration of pseudo-ductility in unidirectional discontinuous carbon fibre/epoxy prepreg composites , 2015 .

[16]  M. Wisnom,et al.  Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates , 2014 .

[17]  P. Robinson,et al.  An analytical shear-lag model for composites with ‘brick-and-mortar’ architecture considering non-linear matrix response and failure , 2014 .

[18]  J. Summerscales,et al.  Hybrids-a review: Part 1. Techniques, design and construction , 1979 .

[19]  W. Paepegem,et al.  On the in-plane mechanical properties of stainless steel fibre reinforced ductile composites , 2014 .

[20]  Tomohiro Yokozeki,et al.  Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings , 2010 .

[21]  Hui Qian,et al.  Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation , 2010 .

[22]  T. Ogasawara,et al.  Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates , 2008 .

[23]  M. Wisnom,et al.  Parametric study of failure mechanisms and optimal configurations of pseudo-ductile thin-ply UD hybrid composites , 2015 .

[24]  M. Wisnom,et al.  Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates , 2015 .

[25]  Yentl Swolfs,et al.  Fibre hybridisation in polymer composites: a review , 2014 .

[26]  L. Mészáros,et al.  Development and mechanical properties of carbon fibre reinforced EP/VE hybrid composite systems , 2014 .

[27]  P. Linde,et al.  Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading , 2014 .

[28]  Michael R Wisnom,et al.  Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres , 2015 .

[29]  J. Summerscales,et al.  Carbon fibre and glass fibre hybrid reinforced plastics , 1978 .

[30]  Fredrik Ohlsson.  An introduction to spread tow reinforcements. Part 2: Design and applications , 2015 .

[31]  M. G. Bader,et al.  The strength of hybrid glass/carbon fibre composites , 1981 .

[32]  J. Summerscales,et al.  Hybrids — a review: Part 2. Physical properties , 1980 .

[33]  H. Wagner,et al.  Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour , 1978 .

[34]  L. Gorbatikh,et al.  Hybrid effects in thin ply carbon/glass unidirectional laminates: Accurate experimental determination and prediction , 2016 .

[35]  Krishan K. Chawla,et al.  Composite Materials: Science and Engineering , 1987 .

[36]  N. L. Hancox,et al.  Fibre composite hybrid materials , 1981 .

[37]  Michael R Wisnom,et al.  Damage analysis of pseudo-ductile thin-ply UD hybrid composites - A new analytical method , 2015 .

[38]  M. Wisnom,et al.  Exploration of the potential for pseudo-ductility in thin ply CFRP angle-ply laminates via an analytical method , 2015 .

[39]  Notched response of non-crimp fabric thin-ply laminates: Analysis methods , 2013 .

[40]  Joël Cugnoni,et al.  Thin ply composites: Experimental characterization and modeling of size-effects , 2014 .

[41]  G. Kretsis,et al.  A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics , 1987 .

[42]  L. Gorbatikh,et al.  Effect of fibre architecture on the tensile and impact behaviour of ductile stainless steel fibre polypropylene composites , 2015 .

[43]  P. Robinson,et al.  Wavy{ply sandwich with composite skins and crushable core for ductility and energy absorption , 2014 .