论文信息 - A BPSK/QPSK Timing-Error Detector for Sampled Receivers

A BPSK/QPSK Timing-Error Detector for Sampled Receivers

A simple algorithm for detection of timing error of a synchronous, band-limited, BPSK or QPSK data stream is proposed. The algorithm requires only two samples per symbol for its operation. One of the two samples is also used for the symbol decision. Derivation of the s curve reveals a sinusoidal shape.

Floyd M. Gardner | F. Gardner

[1] A. Jennings,et al. Data-Sequence Selective Timing Recovery for PAM Systems , 1985, IEEE Trans. Commun..

[2] David G. Messerschmitt,et al. Timing Recovery in Digital Subscriber Loops Using Baud-Rate Sampling , 1986, IEEE J. Sel. Areas Commun..

[3] U. Mengali. A Self Bit Synchronizer Matched to the Signal Shape , 1971, IEEE Transactions on Aerospace and Electronic Systems.

[4] Toshiro Suzuki,et al. Line Equalizer for a Digital Subscriber Loop Employing Switched Capacitor Technology , 1982, IEEE Trans. Commun..

[5] F. M. Gardner. Carrier and clock synchronisation for TDMA digital communications , 1976 .

[6] L. Franks,et al. Statistical Properties of Timing Jitter in a PAM Timing Recovery Scheme , 1974, IEEE Trans. Commun..

[7] David G. Messerschmitt,et al. Timing Recovery in Digital Subscriber Loops , 1985, IEEE Trans. Commun..

[8] K. Mueller,et al. Timing Recovery in Digital Synchronous Data Receivers , 1976, IEEE Trans. Commun..

[9] L. Franks,et al. Carrier and Bit Synchronization in Data Communication - A Tutorial Review , 1980, IEEE Transactions on Communications.

[10] W. U. Lee,et al. Statistical Properties of Timing Jitter in a PAM Timing Recovery Scheme , 1974 .