Investigation of the effect of shunt current on battery efficiency and stack temperature in vanadium redox flow battery

Abstract In vanadium redox flow batteries (VFB), the power of the battery is determined by the number of cells in the stack. Serial and parallel layouts are commonly adopted interactively to suit the designed power demand. The bipolar stack design inevitably introduces shunt currents bypassing into the common manifolds in the stack and thereby resulting in a parasitic loss of power and energy. During standby, shunt current and its associated internal discharge reactions can generate heat and increase stack temperature, potentially leading to thermal precipitation in the positive half-cell. This study aims to investigate the effect of shunt current on stack efficiency and temperature variation during standby periods for a 40-cell stack. Dynamic models based on mass balance, energy balance and electrical circuit are developed for simulations and the results provide an insight into stack performance that will aid in optimising stack design and suitable cooling strategies for the VFB.

[1]  Maria Skyllas-Kazacos,et al.  State of charge monitoring methods for vanadium redox flow battery control , 2011 .

[2]  Jürgen Garche,et al.  Encyclopedia of electrochemical power sources , 2009 .

[3]  M. A. Hoberecht,et al.  NASA-Redox cell-stack shunt current, pumping power, and cell-performance tradeoffs , 1982 .

[4]  Maria Skyllas-Kazacos,et al.  Recent advances with UNSW vanadium‐based redox flow batteries , 2010 .

[5]  Ralph E. White,et al.  Predicting Shunt Currents in Stacks of Bipolar Plate Cells with Conducting Manifolds , 1988 .

[6]  Jun Liu,et al.  Electrochemical energy storage for green grid. , 2011, Chemical reviews.

[7]  Gareth Kear,et al.  Development of the all‐vanadium redox flow battery for energy storage: a review of technological, financial and policy aspects , 2012 .

[8]  Anthony G. Fane,et al.  New All‐Vanadium Redox Flow Cell , 1986 .

[9]  Jie Bao,et al.  Thermal modelling of battery configuration and self-discharge reactions in vanadium redox flow battery , 2012 .

[10]  Antonio Aldaz,et al.  Scale-up studies of an Fe/Cr redox flow battery based on shunt current analysis , 1992 .

[11]  Ralph E. White,et al.  Predicting Shunt Currents in Stacks of Bipolar Plate Cells , 1986 .

[12]  Jie Bao,et al.  Dynamic modelling of the effects of ion diffusion and side reactions on the capacity loss for vanadi , 2011 .

[13]  S. Szpak,et al.  Power losses in batteries with a common electrolytic path , 1989 .

[14]  Ken Nozaki,et al.  Numerical Analysis On Shunt Current In Flow Batteries , 1990, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference.

[15]  Maria Skyllas-Kazacos,et al.  Progress in Flow Battery Research and Development , 2011 .

[16]  Maria Skyllas-Kazacos,et al.  Characteristics of a new all-vanadium redox flow battery , 1988 .

[17]  Brant C. White,et al.  United States patent , 1985 .

[18]  J. Robert Selman,et al.  A model for bipolar current leakage in cell stacks with separate electrolyte loops , 1989 .

[19]  Bin Li,et al.  Recent Progress in Redox Flow Battery Research and Development , 2012 .

[20]  Antonio Aldaz,et al.  Development of a 0.1 kW power accumulation pilot plant based on an Fe/Cr redox flow battery Part I. Considerations on flow-distribution design , 1994 .

[21]  R. F. Savinell,et al.  A Technique for Calculating Shunt Leakage and Cell Currents in Bipolar Stacks Having Divided or Undivided Cells , 1983 .

[22]  Maria Skyllas-Kazacos,et al.  Efficient Vanadium Redox Flow Cell , 1987 .

[23]  Huamin Zhang,et al.  Shunt current loss of the vanadium redox flow battery , 2011 .

[24]  Meizhong Wang.  Understandable Electric Circuits , 2010 .