Polypropylene/Graphene and Polypropylene/Carbon Fiber Conductive Composites: Mechanical, Crystallization and Electromagnetic Properties

This study aims to examine the properties of composites that different carbon materials with different measurements can reinforce. Using a melt compounding method, this study combines polypropylene (PP) and graphene nano-sheets (GNs) or carbon fiber (CF) to make PP/GNs and PP/CF conductive composites, respectively. The DSC results and optical microscopic observation show that both GNs and CF enable PP to crystalize at a high temperature. The tensile modulus of PP/GNs and PP/CF conductive composites remarkably increases as a result of the increasing content of conductive fillers. The tensile strength of the PP/GNs conductive composites is inversely proportional to the loading level of GNs. Containing 20 wt% of GNs, the PP/GNs conductive composites have an optimal conductivity of 0.36 S/m and an optimal EMI SE of 13 dB. PP/CF conductive composites have an optimal conductivity of 10−6 S/m when composed of no less than 3 wt% of CF, and an optimal EMI SE of 25 dB when composed of 20 wt% of CF.

[1]  Lawrence T. Drzal,et al.  A new compounding method for exfoliated graphite–polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold , 2007 .

[2]  N. Okazaki,et al.  Improvement of electrical conductivity with phase‐separation in polyolefin/multiwall carbon nanotube/polyethylene oxide composites , 2013 .

[3]  Simon S. Park,et al.  Electrical and electromagnetic interference shielding properties of flow-induced oriented carbon nanotubes in polycarbonate , 2011 .

[4]  Changyu Shen,et al.  Synergistic effect of carbon fibers on the conductive properties of a segregated carbon black/polypropylene composite , 2014 .

[5]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[6]  C. Chan,et al.  Nucleating effect of calcium stearate coated CaCO(3) nanoparticles on polypropylene. , 2011, Journal of colloid and interface science.

[7]  A. Bhowmick,et al.  A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites , 2011 .

[8]  H. Bai,et al.  Functionalized multi-walled carbon nanotubes improve nonisothermal crystallization of poly(ethylene terephthalate) , 2008 .

[9]  S. Blacher,et al.  Electrical and dielectric properties of carbon black filled co-continuous two-phase polymer blends , 1999 .

[10]  C. Han,et al.  Interpenetrating network formation in isotactic polypropylene/graphene composites , 2013 .

[11]  R. Ruoff,et al.  Graphene-based polymer nanocomposites , 2011 .

[12]  Zhi-Min Dang,et al.  Electrical property and microstructure analysis of poly(vinylidene fluoride)-based composites with different conducting fillers , 2007 .

[13]  S. Shang,et al.  Crystallization behavior of poly(trimethylene terephthalate)-poly (ethylene glycol) segmented copolyesters/multi-walled carbon nanotube nanocomposites , 2010 .

[14]  Uttandaraman Sundararaj,et al.  Electromagnetic interference shielding mechanisms of CNT/polymer composites , 2009 .

[15]  W. Zhong,et al.  A plant fiber reinforced polymer composite prepared by a twin-screw extruder. , 2009, Bioresource technology.

[16]  P. Pramanik,et al.  Conductive nitrile rubber composite containing carbon fillers: Studies on mechanical properties and electrical conductivity , 1992 .

[17]  Z. Dang,et al.  High thermal conductivity and high electrical resistivity of poly(vinylidene fluoride)/polystyrene blends by controlling the localization of hybrid fillers , 2013 .

[18]  Wiriya Thongruang,et al.  Correlated electrical conductivity and mechanical property analysis of high-density polyethylene filled with graphite and carbon fiber , 2002 .

[19]  P. T. Lillehei,et al.  AC and DC percolative conductivity of single wall carbon nanotube polymer composites , 2005 .

[20]  Kalappa Prashantha,et al.  Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties , 2009 .

[21]  M. Rieu,et al.  Tunable architecture for flexible and highly conductive graphene-polymer composites , 2014 .

[22]  M. Narkis,et al.  Electrical properties of hybrid carbon black/carbon fiber polypropylene composites , 2007 .

[23]  Thomas Apperley,et al.  Comparative study of electromagnetic interference shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene composites , 2012 .

[24]  A. Fereidoon,et al.  Effect of carbon nanotubes content on crystallization kinetics and morphology of polypropylene , 2009 .

[25]  I. Huynen,et al.  Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials , 2013 .

[26]  M. S. Sarto,et al.  Electromagnetic absorbing properties of graphene–polymer composite shields , 2014 .

[27]  A. H. Korayem,et al.  Reinforcing brittle and ductile epoxy matrices using carbon nanotubes masterbatch , 2014 .

[28]  H. Palza,et al.  Electrical behavior of polypropylene composites melt mixed with carbon-based particles: Effect of the kind of particle and annealing process , 2014 .

[29]  Erol Sancaktar,et al.  Fabrication of microwave exfoliated graphite oxide reinforced thermoplastic polyurethane nanocomposites: Effects of filler on morphology, mechanical, thermal and conductive properties , 2013 .

[30]  Simon S. Park,et al.  The electrical conductivity and electromagnetic interference shielding of injection molded multi-walled carbon nanotube/polystyrene composites , 2012 .

[31]  Yu-Sheng Wang,et al.  Using a non-covalent modification to prepare a high electromagnetic interference shielding performance graphene nanosheet/water-borne polyurethane composite , 2013 .

[32]  Jinrui Huang,et al.  Control of carbon nanotubes at the interface of a co-continuous immiscible polymer blend to fabricate conductive composites with ultralow percolation thresholds , 2014 .

[33]  Donghua Xu,et al.  Role of multi-wall carbon nanotube network in composites to crystallization of isotactic polypropylene matrix , 2008 .

[34]  B. Hagström,et al.  Improvement of melt spinning properties and conductivity of immiscible polypropylene/polystyrene blends containing carbon black by addition of styrene‐ethylene‐butene‐styrene block copolymer , 2011 .

[35]  Wei Yang,et al.  Crystallization and reinforcement of poly (vinylidene fluoride) nanocomposites: Role of high molecular weight resin and carbon nanotubes , 2012 .

[36]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[37]  Zhong-Zhen Yu,et al.  Electrically conductive polyethylene terephthalate/graphene nanocomposites prepared by melt compounding , 2010 .

[38]  B. B. Khatua,et al.  Development of electrical conductivity with minimum possible percolation threshold in multi-wall carbon nanotube/polystyrene composites , 2011 .

[39]  Hui Yang,et al.  The combined effects of carbon black and carbon fiber on the electrical properties of composites based on polyethylene or polyethylene/polypropylene blend , 2011 .

[40]  P. Praserthdam,et al.  Synthesis of well dispersed graphene in conjugated poly(3,4-ethylenedioxythiophene):polystyrene sulfonate via click chemistry , 2014 .

[41]  Shaoyun Guo,et al.  The electrical conductivity of carbon nanotube/carbon black/polypropylene composites prepared through multistage stretching extrusion , 2012 .

[42]  W. Hsu,et al.  Investigation of the electric conductivity and the electromagnetic interference shielding efficiency of SWCNTs/GNS/PAni nanocomposites , 2011 .

[43]  C. Han,et al.  Crystallization behaviors in the isotactic polypropylene/graphene composites , 2014 .