Nonisolated ZVT two-inductor boost converter with a single resonant inductor for high step-up applications

The interleaved operation of a two-inductor boost converter system is a very attractive solution for converting the low input voltage (30–50V) of distributed power sources, such as photovoltaic and fuel cells, to the high output voltage (380V/760V) required in grid-connected power conversion applications. However, a soft switching method is required in the two main switches to increase the overall power conversion efficiency. This paper proposes a zero voltage transition (ZVT) two-inductor boost converter using a single resonant inductor to meet these needs. To satisfy the requirement of soft switching in the two main switches, a resonant cell is constructed at the output side with a bidirectional switch, two auxiliary diodes, and a single resonant inductor. This converter has advantages due to its simple circuitry, reduced size, and low cost due to a single resonant inductor. Compared to a case with a resonant cell at the input side, it does not perturb the input current of the distributed sources. Therefore, it is more suitable for stable maximum power point tracking (MPPT) operation. The validity of the proposed ZVT two-inductor boost converter is verified through experimental results.

[1]  Peter J. Wolfs.  A current-sourced DC-DC converter derived via the duality principle from the half-bridge converter , 1993, IEEE Trans. Ind. Electron..

[2]  Rong-Jong Wai,et al.  High step-up converter with coupled-inductor , 2005 .

[3]  Jung-Min Kwon,et al.  High Step-Up Active-Clamp Converter With Input-Current Doubler and Output-Voltage Doubler for Fuel Cell Power Systems , 2009, IEEE Transactions on Power Electronics.

[4]  Wuhua Li,et al.  Design and Analysis of Isolated ZVT Boost Converters for High-Efficiency and High-Step-Up Applications , 2007, IEEE Transactions on Power Electronics.

[5]  Jih-Sheng Lai,et al.  Power conditioning circuit topologies , 2009, IEEE Industrial Electronics Magazine.

[6]  Jih-Sheng Lai,et al.  Parasitic ringing and design issues of digitally controlled high power interleaved boost converters , 2004, IEEE Transactions on Power Electronics.

[7]  B. Lehman,et al.  An integrated magnetic isolated two-inductor boost converter: analysis, design and experimentation , 2005, IEEE Transactions on Power Electronics.

[8]  Chung-Yuen Won,et al.  Fuel Cell Generation System With a New Active Clamping Current-Fed Half-Bridge Converter , 2007, IEEE Transactions on Energy Conversion.

[9]  Milan M. Jovanovic,et al.  New two-inductor boost converter with auxiliary transformer , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[10]  Yao-Ching Hsieh,et al.  An Interleaved Boost Converter With Zero-Voltage Transition , 2009, IEEE Transactions on Power Electronics.

[11]  F. Blaabjerg,et al.  A review of single-phase grid-connected inverters for photovoltaic modules , 2005, IEEE Transactions on Industry Applications.

[12]  Quan Li,et al.  An Analysis of the ZVS Two-Inductor Boost Converter under Variable Frequency Operation , 2007, IEEE Transactions on Power Electronics.

[13]  Wuhua Li,et al.  A Review of Non-Isolated High Step-Up DC/DC Converters in Renewable Energy Applications , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[14]  Prakash Parvatham.  A Soft-Switching DC/DC Converter with High Voltage Gain , 2013 .

[15]  Dong-Seok Hyun,et al.  IBC Using a Single Resonant Inductor for High-Power Applications , 2009, IEEE Transactions on Industrial Electronics.

[16]  Sung-Sae Lee,et al.  Coupled Inductor Incorporated Boost Half-Bridge Converter With Wide ZVS Operation Range , 2009, IEEE Transactions on Industrial Electronics.

[17]  L.A. Flores,et al.  Isolated Two Inductor Boost Converter Start-up and Steady State Operation with any Output Voltage , 2007, Electronics, Robotics and Automotive Mechanics Conference (CERMA 2007).

[18]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.

[19]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[20]  Po-Wa Lee,et al.  Steady-state analysis of an interleaved boost converter with coupled inductors , 2000, IEEE Trans. Ind. Electron..

[21]  Rong-Jong Wai,et al.  High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress , 2007, IEEE Transactions on Industrial Electronics.

[22]  Johann W. Kolar,et al.  Comparison of 2- and 3-level active filters with enhanced bridge-leg loss distribution , 2011, 8th International Conference on Power Electronics - ECCE Asia.