论文信息 - Rotary bending of marine cables and umbilicals

Rotary bending of marine cables and umbilicals

The stress analysis of a marine cable or umbilical in a rotary bending test rig is presented. It is shown that the finite length of the test sample and the terminations have a significant influence on the stresses in the umbilical which is taken into consideration in determining the cyclic stress distribution in the helical components. Consistency between the theory and test results is demonstrated.

J. A. Witz | Z. Tan | Z. Tan | J. Witz

[1] M. Raoof,et al. Wire Stress Calculations in Helical Strands Undergoing Bending , 1992 .

[2] Michael F. Ashby,et al. Elsevier materials selector , 1991 .

[3] J. A. Witz,et al. On the axial-torsional structural behaviour of flexible pipes, umbilicals and marine cables , 1992 .

[4] Robert Lewis Reuben,et al. Power cables and umbilicals. Conductor strain under pure bending , 1991 .

[5] A. Love. A treatise on the mathematical theory of elasticity , 1892 .

[6] Z Tan,et al. LOOP FORMATION OF MARINE CABLES AND UMBILICALS DURING INSTALLATION , 1992 .

[7] C. L. Bournazel,et al. CALCULATION OF STRESSES AND SLIP IN STRUCTURAL LAYERS OF UNBONDED FLEXIBLE PIPES , 1987 .

[8] J. T. Benjaminsen,et al. Fatigue Internal Stresses And Deformations Of Electrical Umbilicals: Analytical Work , 1993 .

[9] J.M.M. Out. On the Prediction of the Endurance Strength of Flexible Pipe , 1989 .

[10] J. A. Witz,et al. On the flexural structural behaviour of flexible pipes, umbilicals and marine cables , 1992 .