Morphological evolution and toughening mechanism of polypropylene and polypropylene/poly(ethylene-co-octene) alternating multilayered materials with enhanced low-temperature toughness

In this paper, polypropylene (PP) and polypropylene/poly(ethylene-co-octene) blends (PP/POE) were fabricated into alternating multilayered materials to improve the low-temperature toughness of PP efficiently compared with conventional PP/POE blends. POM, SEM, micro-FTIR and part-impact test were performed to characterize and investigate the alternating multilayered microstructure and its relationship with mechanical properties. The results showed that the unique alternating multilayered microstructure could generate a distinctive distribution of POE, resulting in the great change in both macro- and micro-morphology of the materials. Most interestingly, the morphological evolution of the dispersed POE phase before and after the impact showed that a brittle–ductile transition (BDT) layer was formed at the interlayer interface between the adjacent PP layer and the PP/POE layer during the impact process, which was the main reason for the great improvement of the low-temperature toughness. Moreover, the rigidity of alternating multilayered materials was maintained very well because of the existence of the rigid PP layer, indicating that the alternating multilayered microstructure was very helpful to maintain a good balance between toughness and rigidity.

[1]  Miao Tang,et al.  Disclosing the formation of ring-banded spherulites for semicrystalline polymers through the double-layer film method , 2014 .

[2]  Q. Fu,et al.  Hierarchical structure and unique impact behavior of polypropylene/ethylene-octene copolymer blends as obtained via dynamic packing injection molding , 2013 .

[3]  F. Jiang,et al.  Effect of miscibility on spherulitic growth rate for double-layer polymer films , 2013 .

[4]  L. Ye,et al.  Simultaneous enhancements of toughness and tensile strength for thermoplastic/elastomer blends through interfacial photocrosslinking with UV radiation , 2013 .

[5]  Ming‐bo Yang,et al.  Largely improved impact toughness of PA6/EPDM-g-MA/HDPE ternary blends: The role of core–shell particles formed in melt processing on preventing micro-crack propagation , 2013 .

[6]  Yunsheng Ding,et al.  Significantly Accelerated Spherulitic Growth Rates for Semicrystalline Polymers through the Layer-by-Layer Film Method , 2013 .

[7]  Guangyong Liu,et al.  Study on the mechanical and morphological properties of toughened polypropylene blends for automobile bumpers , 2013, Polymer Bulletin.

[8]  Ming‐bo Yang,et al.  Characterization of PA6/EPDM-g-MA/HDPE ternary blends: The role of core-shell structure , 2012 .

[9]  A. Hiltner,et al.  Structure and Gas Barrier Properties of Poly(propylene-graft-maleic anhydride)/Phosphate Glass Composites Prepared by Microlayer Coextrusion , 2010 .

[10]  P. Carreau,et al.  Microporous membranes obtained from polypropylene blend films by stretching , 2008 .

[11]  Xiaofeng Wang,et al.  Regulation of morphology and mechanical properties of polypropylene/poly(ethylene-co-propylene) in-reactor alloys by multi-stage sequential polymerization , 2007 .

[12]  Q. Fu,et al.  Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites , 2006 .

[13]  S. Bai,et al.  Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends , 2004 .

[14]  Jinhai Yang,et al.  Brittle–ductile transition of PP/POE blends in both impact and high speed tensile tests , 2003 .

[15]  Wentao Song,et al.  Effect of interfacial interaction on morphology and mechanical properties of PP/POE/BaSO4 ternary composites , 2003 .

[16]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 2. The effect of the rubber content on the deformation and impact behaviour , 1999 .

[17]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 5. Deformation mechanism during fracture , 1999 .

[18]  Y. Ozaki,et al.  Two-Dimensional Fourier Transform Raman Correlation Spectroscopy Study of Composition-Induced Structural Changes in a Series of Ethylene/Vinyl Acetate Copolymers , 1999 .

[19]  S. Wong,et al.  Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blends : 1. Structure -property relationships , 1999 .

[20]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 1. The effect of the matrix properties on the impact behaviour , 1998 .

[21]  F. Wang,et al.  Effect of morphology on the brittle ductile transition of polymer blends: 1. A new equation for correlating morphological parameters , 1997 .

[22]  Eric Baer,et al.  Novel structures by microlayer coextrusion-talc-filled PP, PC/SAN, and HDPE/LLDPE , 1997 .

[23]  A. Dibenedetto,et al.  The mechanical properties of ternary composites of polypropylene with inorganic fillers and elastomer inclusions , 1994, Journal of Materials Science.

[24]  Souheng Wu.  Chain structure, phase morphology, and toughness relationships in polymers and blends , 1990 .

[25]  S. De,et al.  Effect of cryo‐ground rubber on melt flow and mechanical properties of polypropylene , 1986 .

[26]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[27]  D. Uhlmann,et al.  The rubber particle size dependence of crazing in polypropylene , 1985 .

[28]  D. Uhlmann,et al.  Crystalline morphology of polypropylene and rubber-modified polypropylene , 1984 .

[29]  Zhiliu Feng,et al.  MORPHOLOGY AND PROPERTIES OF BLENDS OF POLYPROPYLENE WITH ETHYLENE-PROPYLENE RUBBER , 1984 .

[30]  Won-Ki Lee,et al.  Quantitative analysis of unknown compositions in ternary polymer blends: A model study on NR/SBR/BR system , 2007 .

[31]  Q. Fu,et al.  Brittle-ductile transition and toughening mechanism in POM/TPU/CaCO3 ternary composites , 2004 .

[32]  Takashi Inoue,et al.  Phase morphology of polymer blends: scanning electron microscope observation by backscattering from a microtomed and stained surface , 1992 .

[33]  D. Quemada,et al.  Rheology of concentrated disperse systems and minimum energy dissipation principle , 1977 .