Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles

Abstract In porthole die extrusion process of aluminum alloy profiles, the formation of longitudinal weld seams (L-seams) is inevitable. Analysis of L-seam defects and investigation of solid-state bonding criteria are important issues for practical production. In this study, a set of modular porthole extrusion dies with different depths of welding chambers were designed and manufactured. The profiles extruded with different depths of welding chambers were obtained by performing extrusion experiments.The welding quality of extruded profiles was characterized by means of microstructure observation, tensile test and fracture analysis. The true stress-strain curves of homogenized AA6063 aluminum alloy with various strain rates and deformation temperatures were obtained by means of isothermal hot compression test. Three-dimensional transient numerical simulation models of the porthole die extrusion processes were established. Flow behaviors of aluminum alloy in porthole die extrusion process were investigated, and the formation processes of L-seams and their defects were revealed. The solid-state bonding processes of metal particles were traced and their welding paths were determined. Finally, based on the plastic deformation and diffusion mechanisms for closure behaviors of micro voids on contact interfaces, a new dimensionless solid-state bonding criterion related to stress triaxiality, effective strain rate, temperature and contact time was proposed. The bonding quality of L-seams of extruded profiles without any macro defect was predicted successfully by using this new criterion. In addition, it was found that the formation of a macro hole in the profile extruded with a shallow welding chamber is attributed to metal flow behavior, and does not relate to solid-state bonding process.

[1]  H. Yang,et al.  Ductile fracture: Experiments and computations , 2011 .

[2]  Daniel R. Cooper,et al.  Influence of diffusion mechanisms in aluminium solid-state welding processes , 2014 .

[3]  Wojciech Z. Misiolek,et al.  Effect of die design on the welding quality during solid state recycling of AA6060 chips by hot extrusion , 2013 .

[4]  Guijun Bi,et al.  Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters , 2014 .

[5]  Daniel R. Cooper,et al.  The influence of deformation conditions in solid-state aluminium welding processes on the resulting weld strength , 2014 .

[6]  M. Eroglu,et al.  A new model for diffusion bonding and its application to duplex alloys , 1999 .

[7]  Jie Zhou,et al.  FE analysis of metal flow and weld seam formation in a porthole die during the extrusion of a magnesium alloy into a square tube and the effect of ram speed on weld strength , 2008 .

[8]  Y. Sohn.  13 - Diffusion in metals , 2004 .

[9]  Elisabetta Ceretti,et al.  A new approach to study material bonding in extrusion porthole dies , 2009 .

[10]  Guoqun Zhao,et al.  Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles , 2016 .

[11]  Lorenzo Donati,et al.  The effect of die design on the production and seam weld quality of extruded aluminum profiles , 2005 .

[12]  G. Germain,et al.  Experimental characterization and numerical modeling of micromechanical damage under different stress states , 2013 .

[13]  Lorenzo Donati,et al.  The prediction of seam welds quality in aluminum extrusion , 2004 .

[14]  L. Katgerman,et al.  Physical Simulation of Longitudinal Weld Seam Formation During Extrusion to Produce Hollow Aluminum Profiles , 2009 .

[15]  L. Katgerman,et al.  The origin of weld seam defects related to metal flow in the hot extrusion of aluminium alloys en AW-6060 and en AW-6082 , 2014 .

[16]  Shuo Yang,et al.  Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy , 2014 .

[17]  B. Derby,et al.  Theoretical model for diffusion bonding , 1982 .

[18]  Dayong Li,et al.  A physical simulation of longitudinal seam welding in micro channel tube extrusion , 2014 .

[19]  Jie Zhou,et al.  Extrusion of 7075 aluminium alloy through double-pocket dies to manufacture a complex profile , 2009 .

[20]  Miaoquan Li,et al.  Modeling of void closure in diffusion bonding process based on dynamic conditions , 2012 .

[21]  Guoqun Zhao,et al.  Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train , 2011 .

[22]  Dong-Yol Yang,et al.  Investigation into the improvement of welding strength in three dimensional extrusion of tubes using porthole dies , 2002 .

[23]  Stefania Bruschi,et al.  Physical Simulation of Longitudinal Welding in Porthole-Die Extrusion , 2006 .

[24]  E. Wallach,et al.  Modelling solid-state diffusion bonding , 1989 .

[25]  I. Flitta,et al.  Nature of friction in extrusion process and its effect on material flow , 2003 .

[26]  Morihiko Nakasaki,et al.  Application of hydrostatic integration parameter for free-forging and rolling , 2006 .

[27]  Jie Zhou,et al.  3D FEM simulation of the whole cycle of aluminium extrusion throughout the transient state and the steady state using the updated Lagrangian approach , 2003 .