Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses.

Two Ni-free bulk metallic glasses (BMGs) of Zr(60)Nb(5)Cu(22.5)Pd(5)Al(7.5) and Zr(60)Nb(5)Cu(20)Fe(5)Al(10) were successfully prepared by arc-melting and copper mold casting. The thermal stability and crystallization were studied using differential scanning calorimetry. It demonstrates that the two BMGs exhibit very good glass forming ability with a wide supercooled liquid region. A multi-step process of crystallization with a preferential formation of quasicrystals occurred in both BMGs under continuous heating. The deformation behavior of the two BMGs was investigated using quasi-static compression testing. It reveals that the BMGs exhibit not only superior strength but also an extended plasticity. Corrosion behaviors of the BMGs were investigated in phosphate buffered solution by electrochemical polarization. The result shows that the two BMGs exhibit excellent corrosion resistance characterized by low corrosion current densities and wide passive regions. X-ray photoelectron spectroscopy analysis revealed that the passive film formed after anodic polarization was highly enriched in zirconium, niobium, and aluminum oxides. This is attributed to the excellent corrosion resistance. Additionally, the potential cytotoxicity of the two Ni-free BMGs was evaluated through cell culture for 1 week followed by 3-(4,5-Dimethylthiazol-2-yl-)-2,5-diphenyltetrazolium bromide assay and SEM observation. The results indicate that the two Ni-free BMGs exhibit as good biocompatibility as Ti-6Al-4V alloy, and thus show a promising potential for biomedical applications.

[1]  C. Qiu,et al.  Corrosion behavior of Zr-based bulk metallic glasses in different artificial body fluids , 2006 .

[2]  S. Tosatti,et al.  Cytotoxicity of Zr-based bulk metallic glasses , 2006 .

[3]  C. Qiu,et al.  The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid. , 2005, Journal of biomedical materials research. Part A.

[4]  M. Morrison,et al.  The electrochemical evaluation of a Zr-based bulk metallic glass in a phosphate-buffered saline electrolyte. , 2005, Journal of biomedical materials research. Part A.

[5]  C. Qiu,et al.  The effect of the microalloying of Hf on the corrosion behavior of ZrCuNiAl bulk metallic glass , 2005 .

[6]  J. F. Löffler,et al.  Bulk metallic glass formation in Zr-Cu-Fe-Al alloys , 2005 .

[7]  Takao Hanawa,et al.  Metal ion release from metal implants , 2004 .

[8]  E. Eisenbarth,et al.  Biocompatibility of β-stabilizing elements of titanium alloys , 2004 .

[9]  D. Bae,et al.  A development of Ni-based alloys with enhanced plasticity , 2004 .

[10]  Jing Li,et al.  Using Fluctuation Microscopy to Characterize Structural Order in Metallic Glasses , 2003, Microscopy and Microanalysis.

[11]  J. Eckert,et al.  Difference in compressive and tensile fracture mechanisms of Zr59CU20Al10Ni8Ti3 bulk metallic glass , 2003 .

[12]  T. Hufnagel,et al.  Short-range and medium-range order in(Zr(70)Cu(20)Ni(10))(90-x)Ta(x)Al(10) bulk amorphous alloys , 2003 .

[13]  Jing Li,et al.  Controlling shear band behavior in metallic glasses through microstructural design , 2002 .

[14]  T. Hanawa,et al.  Re-passivation current of amorphous Zr65Al7.5Ni10Cu17.5 alloy in a Hanks’ balanced solution , 2002 .

[15]  K. T. Ramesh,et al.  Enhanced plastic strain in Zr-based bulk amorphous alloys , 2001 .

[16]  A. Inoue,et al.  Icosahedral quasicrystalline phase formation in Zr-Al-Ni-Cu glassy alloys by addition of Nb, Ta and V elements , 2001 .

[17]  Marcus Textor,et al.  Titanium in Medicine : material science, surface science, engineering, biological responses and medical applications , 2001 .

[18]  Takao Hanawa,et al.  Effects of surface finishing and dissolved oxygen on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution , 2000 .

[19]  T. Hanawa,et al.  Effect of pH on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in a phosphate-buffered solution , 2000 .

[20]  A. Inoue,et al.  Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys , 2000 .

[21]  J. Wataha,et al.  Effect of silver, copper, mercury, and nickel ions on cellular proliferation during extended, low-dose exposures. , 2000, Journal of biomedical materials research.

[22]  T. Hanawa,et al.  Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution , 2000 .

[23]  J. G. Wang,et al.  Nano-scratch behavior of a bulk Zr-10Al-5Ti-17.9Cu-14.6Ni amorphous alloy , 2000 .

[24]  R. Baan,et al.  Evaluation of the carcinogenic risks to humans associated with surgical implants and other foreign bodies - a report of an IARC Monographs Programme Meeting. International Agency for Research on Cancer. , 2000, European journal of cancer.

[25]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[26]  W. Johnson.  Bulk Glass-Forming Metallic Alloys: Science and Technology , 1999 .

[27]  Jef A. Helsen,et al.  Metals as Biomaterials , 1998 .

[28]  W. Johnson,et al.  Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass , 1997 .

[29]  Peter J. Uggowitzer,et al.  Nickel Free High Nitrogen Austenitic Steels , 1996 .

[30]  A. Inoue.  High strength bulk amorphous alloys with low critical cooling rates (overview) , 1995 .