Graphene nanoribbon and nanostructured SnO2 composite anodes for lithium ion batteries.

A composite made from graphene nanoribbons (GNRs) and tin oxide (SnO2) nanoparticles (NPs) is synthesized and used as the anode material for lithium ion batteries (LIBs). The conductive GNRs, prepared using sodium/potassium unzipping of multiwall carbon nanotubes, can boost the lithium storage performance of SnO2 NPs. The composite, as an anode material for LIBs, exhibits reversible capacities of over 1520 and 1130 mAh/g for the first discharge and charge, respectively, which is more than the theoretical capacity of SnO2. The reversible capacity retains ~825 mAh/g at a current density of 100 mA/g with a Coulombic efficiency of 98% after 50 cycles. Further, the composite shows good power performance with a reversible capacity of ~580 mAh/g at the current density of 2 A/g. The high capacity, good power performance and retention can be attributed to uniformly distributed SnO2 NPs along the high-aspect-ratio GNRs. The GNRs act as conductive additives that buffer the volume changes of SnO2 during cycling. This work provides a starting point for exploring the composites made from GNRs and other transition metal oxides for lithium storage applications.

[1]  J. Tarascon,et al.  Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries , 2000, Nature.

[2]  Zhong Li,et al.  High reversible capacity of SnO2/graphene nanocomposite as an anode material for lithium-ion batteries , 2011 .

[3]  Michael Holzapfel,et al.  High Rate Capability of Graphite Negative Electrodes for Lithium-Ion Batteries , 2005 .

[4]  E. Yoo,et al.  Enhanced cyclic performance and lithium storage capacity of SnO2/graphene nanoporous electrodes with three-dimensionally delaminated flexible structure. , 2009, Nano letters.

[5]  Bruno Scrosati,et al.  Nanostructured Sn–C Composite as an Advanced Anode Material in High‐Performance Lithium‐Ion Batteries , 2007 .

[6]  Juan E Peralta,et al.  Enhanced half-metallicity in edge-oxidized zigzag graphene nanoribbons. , 2007, Nano letters.

[7]  W. Lu,et al.  Highly conductive graphene nanoribbons by longitudinal splitting of carbon nanotubes using potassium vapor. , 2011, ACS nano.

[8]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[9]  Huijun Li,et al.  SnO2-coated multiwall carbon nanotube composite anode materials for rechargeable lithium-ion batteries , 2010 .

[10]  M. Antonietti,et al.  Facile One-Pot Synthesis of Mesoporous SnO2 Microspheres via Nanoparticles Assembly and Lithium Storage Properties , 2008 .

[11]  V. Barone,et al.  Enhanced electrochemical lithium storage by graphene nanoribbons. , 2010, Journal of the American Chemical Society.

[12]  Yong Wang,et al.  Highly Reversible Lithium Storage in Porous SnO2 Nanotubes with Coaxially Grown Carbon Nanotube Overlayers , 2006 .

[13]  J. Tour,et al.  Longitudinal unzipping of carbon nanotubes to form graphene nanoribbons , 2009, Nature.

[14]  Igor Luzinov,et al.  Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid. , 2010, ACS applied materials & interfaces.

[15]  K. Kang,et al.  SnO2/graphene composite with high lithium storage capability for lithium rechargeable batteries , 2010 .

[16]  Chananate Uthaisar,et al.  Lithium adsorption on zigzag graphene nanoribbons , 2009, 0910.5154.

[17]  R. Ruoff,et al.  Reduced graphene oxide/tin oxide composite as an enhanced anode material for lithium ion batteries prepared by homogenous coprecipitation , 2011 .

[18]  W. Lu,et al.  In situ intercalation replacement and selective functionalization of graphene nanoribbon stacks. , 2012, ACS nano.

[19]  Zonghai Chen,et al.  Large-volume-change electrodes for Li-ion batteries of amorphous alloy particles held by elastomeric tethers , 2003 .

[20]  Qiang Wang,et al.  In Situ Growth of Mesoporous SnO2 on Multiwalled Carbon Nanotubes: A Novel Composite with Porous‐Tube Structure as Anode for Lithium Batteries , 2007 .

[21]  S. Dou,et al.  A facile route to carbon-coated SnO2 nanoparticles combined with a new binder for enhanced cyclability of Li-ion rechargeable batteries , 2009 .

[22]  Bei Wang,et al.  In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries , 2009 .

[23]  K. Kudin.  Zigzag graphene nanoribbons with saturated edges. , 2008, ACS nano.

[24]  Bruno Scrosati,et al.  A Nanostructured Sn–C Composite Lithium Battery Electrode with Unique Stability and High Electrochemical Performance , 2008 .

[25]  M. Armand,et al.  Building better batteries , 2008, Nature.

[26]  Lidong Li,et al.  One-step in situ synthesis of SnO2/graphene nanocomposites and its application as an anode material for Li-ion batteries. , 2012, ACS applied materials & interfaces.

[27]  B. Tu,et al.  Ordered, Nanostructured Tin‐Based Oxides/Carbon Composite as the Negative‐Electrode Material for Lithium‐Ion Batteries , 2004 .

[28]  Matsuhiko Nishizawa,et al.  Amorphous tin oxide films: preparation and characterization as an anode active material for lithium ion batteries , 2001 .

[29]  Martin Winter,et al.  Filming mechanism of lithium-carbon anodes in organic and inorganic electrolytes , 1995 .

[30]  C. Berger,et al.  Electronic Confinement and Coherence in Patterned Epitaxial Graphene , 2006, Science.

[31]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[32]  Zhan Lin,et al.  Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries , 2011 .

[33]  E. Samulski,et al.  Large-Scale, solution-phase growth of single-crystalline SnO2 nanorods. , 2004, Journal of the American Chemical Society.

[34]  Jing Li,et al.  Sodium Carboxymethyl Cellulose A Potential Binder for Si Negative Electrodes for Li-Ion Batteries , 2007 .