Numerical analysis of steady flow in aorto-coronary bypass 3-D model.

Intimal hyperplasia and atherosclerosis have a predominant role in the failure of coronary artery bypass procedures. Theoretical studies and in vivo observations have shown that these pathologies are much more likely to occur in the proximity of end-to-side anastomosis, thus indicating that fluid dynamic conditions may be included in the pathogenic causes of the initiation, progression and complication of intimal hyperplasia. In order to study the fluid dynamics at the anastomosis of an aortocoronary bypass, a three-dimensional mathematical model based on a FEM approach was developed. Steady-state simulations were studied in two different geometrical models of anastomosis which differ in their insertion angles (45 and 60 degree). Flow fields with three-dimensional helical patterns, secondary flows, and shear stresses were also investigated. The results show the presence of low shear stresses on the top wall just beyond the toe of the anastomosis and in the region of the coronary artery before the junction. A high wall shear stress region is present on the lateral wall of the coronary artery immediately downstream from the anastomosis. The influence of flow rate distribution on the secondary flows is also illustrated. These results confirm the sensitivity of flow behavior to the model's geometrical parameters and enhance the importance of reproducing the anastomosis junction as closely as possible in order to evaluate the effective shear stress distribution.

[1]  R. Pietrabissa,et al.  Simulation study of the fluid dynamics of aorto-coronary bypass. , 1990, Journal of biomedical engineering.

[2]  C. W. Hartman,et al.  Aortocoronary bypass surgery: Correlation of angiographic symptomatic and functional improvement at 1 year. , 1976, The American journal of cardiology.

[3]  C Kleinstreuer,et al.  Pulsatile two-dimensional flow and plaque formation in a carotid artery bifurcation. , 1990, Journal of biomechanics.

[4]  D. Steinman,et al.  A numerical simulation of flow in a two-dimensional end-to-side anastomosis model. , 1993, Journal of biomechanical engineering.

[5]  D. L. Fry.  Certain Histological and Chemical Responses of the Vascular Interface to Acutely Induced Mechanical Stress in the Aorta of the Dog , 1969, Circulation research.

[6]  V. Sottiurai,et al.  Distal anastomotic intimal hyperplasia: histopathologic character and biogenesis. , 1989, Annals of vascular surgery.

[7]  C. Grondin.  Late results of coronary artery grafting: is there a flag on the field? , 1984, The Journal of thoracic and cardiovascular surgery.

[8]  V. Sottiurai,et al.  Intimal hyperplasia and neointima: An ultrastructural analysis of thrombosed grafts in humans. , 1983, Surgery.

[9]  S Glagov,et al.  The role of fluid mechanics in the localization and detection of atherosclerosis. , 1993, Journal of biomechanical engineering.

[10]  R. Schroter,et al.  Atheroma and arterial wall shear - Observation, correlation and proposal of a shear dependent mass transfer mechanism for atherogenesis , 1971, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[11]  C. R. Ethier,et al.  Steady and pulsatile flow fields in an end-to-side arterial anastomosis model. , 1990, Journal of vascular surgery.

[12]  M. Engelman,et al.  FIDAP (A Fluid Dynamics Analysis Program) , 1982 .

[13]  S. Glagov,et al.  Role of Blood Flow in Atherogenesis , 1988, Springer Japan.

[14]  R. Nerem,et al.  Fluid dynamics as a localizing factor for atherosclerosis : the proceedings of a symposium held at Heidelberg, FRG, June 18-20, 1982 , 1983 .

[15]  K. An,et al.  Pressure distribution on articular surfaces: application to joint stability evaluation. , 1990, Journal of biomechanics.

[16]  D J Phillips,et al.  Hemodynamics of the normal human carotid bifurcation: in vitro and in vivo studies. , 1985, Ultrasound in medicine & biology.

[17]  J D Thomas,et al.  The effect of angle and flow rate upon hemodynamics in distal vascular graft anastomoses: a numerical model study. , 1991, Journal of biomechanical engineering.

[18]  A. Imparato,et al.  Intimal and neointimal fibrous proliferation causing failure of arterial reconstructions. , 1972, Surgery.

[19]  J. McGeachie,et al.  Vein grafts for arterial repair: their success and reasons for failure. , 1981, Annals of the Royal College of Surgeons of England.

[20]  S Glagov,et al.  Hemodynamic patterns in two models of end-to-side vascular graft anastomoses: effects of pulsatility, flow division, Reynolds number, and hood length. , 1993, Journal of biomechanical engineering.

[21]  F. Kajiya,et al.  Analysis of flow characteristics in poststenotic regions of the human coronary artery during bypass graft surgery. , 1987, Circulation.

[22]  W. Quist,et al.  Flow disturbance at the distal end-to-side anastomosis. Effect of patency of the proximal outflow segment and angle of anastomosis. , 1980, Archives of surgery.

[23]  T J Donohue,et al.  Comparison of Phasic Blood Flow Velocity Characteristics of Arterial and Venous Coronary Artery Bypass Conduits , 1993, Circulation.