Hardened properties of 3D printed concrete with recycled coarse aggregate

[1]  Yu Chen,et al.  3D printing of calcined clay-limestone-based cementitious materials , 2021 .

[2]  G. de Schutter,et al.  3D printable concrete with natural and recycled coarse aggregates: Rheological, mechanical and shrinkage behaviour , 2021, Cement and Concrete Composites.

[3]  Liu Shuhua,et al.  Study on the rheology and buildability of 3D printed concrete with recycled coarse aggregates , 2021 .

[4]  T. Ding,et al.  Large-scale 3D printing concrete technology: Current status and future opportunities , 2021 .

[5]  Yunsheng Zhang,et al.  Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance , 2021 .

[6]  V. Li,et al.  3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties , 2021 .

[7]  A. du Plessis,et al.  An investigation into the porosity of extrusion-based 3D printed concrete , 2021 .

[8]  Geert De Schutter,et al.  Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review , 2021 .

[9]  G. de Schutter,et al.  Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content , 2021 .

[10]  Yilong Han,et al.  Environmental and economic assessment on 3D printed buildings with recycled concrete , 2021 .

[11]  Yunsheng Zhang,et al.  Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization , 2020 .

[12]  Jianzhuang Xiao,et al.  Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure , 2020 .

[13]  A. Kohoutková,et al.  Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing , 2020, Materials.

[14]  Yu Wang,et al.  3D recycled mortar printing: System development, process design, material properties and on-site printing , 2020 .

[15]  G. Bai,et al.  Impact of chloride intrusion on the pore structure of recycled aggregate concrete based on the recycled aggregate porous interface , 2020 .

[16]  J. Sanjayan,et al.  Aggregate-bed 3D concrete printing with cement paste binder , 2020 .

[17]  Na Zhang,et al.  Preparation and microstructural characterization of a novel 3D printable building material composed of copper tailings and iron tailings , 2020 .

[18]  Jianzhuang Xiao,et al.  Mechanical behavior of 3D printed mortar with recycled sand at early ages , 2020 .

[19]  Freek Bos,et al.  Opportunities and challenges for structural engineering of digitally fabricated concrete , 2020, Cement and Concrete Research.

[20]  Yu Wang,et al.  Hardened properties of layered 3D printed concrete with recycled sand , 2020 .

[21]  Erik Schlangen,et al.  Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture , 2020, Cement and Concrete Research.

[22]  Hosein Naderpour,et al.  Estimating the compressive strength of eco-friendly concrete incorporating recycled coarse aggregate using neuro-fuzzy approach , 2020 .

[23]  M. Santhanam,et al.  Evaluating the printability of concretes containing lightweight coarse aggregates , 2020 .

[24]  Viktor Mechtcherine,et al.  Direct printing test for buildability of 3D-printable concrete considering economic viability , 2020 .

[25]  Zhiming Ma,et al.  Utilization of CO2 curing to enhance the properties of recycled aggregate and prepared concrete: A review , 2020 .

[26]  V. Mechtcherine,et al.  Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content , 2019, Cement and Concrete Composites.

[27]  Ravindra K. Dhir,et al.  Use of recycled aggregates arising from construction and demolition waste in new construction applications , 2019, Journal of Cleaner Production.

[28]  G. Bai,et al.  On the mechanism of internal temperature and humidity response of recycled aggregate concrete based on the recycled aggregate porous interface , 2019, Cement and Concrete Composites.

[29]  Nicolas Roussel,et al.  Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin , 2019, Cement and Concrete Research.

[30]  Nicolas Roussel,et al.  Digital Concrete: A Review , 2019, Cement and Concrete Research.

[31]  Ming Jen Tan,et al.  Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing , 2019, Journal of Cleaner Production.

[32]  F. Meloni,et al.  Recycled coarse aggregates from pelletized unused concrete for a more sustainable concrete production , 2019, Journal of Cleaner Production.

[33]  Erik Schlangen,et al.  An approach to develop printable strain hardening cementitious composites , 2019, Materials & Design.

[34]  Fang Wang,et al.  Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing , 2019, Construction and Building Materials.

[35]  Yiwei Weng,et al.  Design 3D Printing Cementitious Materials Via Fuller Thompson Theory and Marson-Percy Model , 2018, 3D Concrete Printing Technology.

[36]  Brian A. Eick,et al.  Investigation of Concrete Mixtures for Additive Construction , 2017, 3D Concrete Printing Technology.

[37]  Jian fei Chen,et al.  Mechanical Properties of Structures 3D-Printed With Cementitious Powders , 2015, 3D Concrete Printing Technology.

[38]  Viktor Mechtcherine,et al.  Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing , 2018, Construction and Building Materials.

[39]  Geert De Schutter,et al.  Vision of 3D printing with concrete — Technical, economic and environmental potentials , 2018, Cement and Concrete Research.

[40]  Cheolwoo Park,et al.  Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniques , 2018, Journal of Cleaner Production.

[41]  Z. Ahmed,et al.  Design of a 3D printed concrete bridge by testing , 2018, Virtual and Physical Prototyping.

[42]  Ming Xia,et al.  Effect of surface moisture on inter-layer strength of 3D printed concrete , 2018 .

[43]  Eric Courteille,et al.  3D printing of earth-based materials: Processing aspects , 2018 .

[44]  Viktor Mechtcherine,et al.  Virtual Sliding Pipe Rheometer for estimating pumpability of concrete , 2018 .

[45]  G. Ma,et al.  Printable properties of cementitious material containing copper tailings for extrusion based 3D printing , 2018 .

[46]  Ming Jen Tan,et al.  Fresh and hardened properties of 3D printable cementitious materials for building and construction , 2018 .

[47]  Ming Jen Tan,et al.  Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material , 2017 .

[48]  Ming Jen Tan,et al.  Additive manufacturing of geopolymer for sustainable built environment , 2017 .

[49]  Yu Chen,et al.  A critical review of 3D concrete printing as a low CO2 concrete approach , 2017 .

[50]  Arpad Horvath,et al.  Concrete mixture proportioning for desired strength and reduced global warming potential , 2016 .

[51]  Anton J.M. Schoot Uiterkamp,et al.  A global sustainability perspective on 3D printing technologies , 2014 .

[52]  Viktor Mechtcherine,et al.  Testing pumpability of concrete using Sliding Pipe Rheometer , 2014 .

[53]  Young Jin Kim,et al.  Prediction on pipe flow of pumped concrete based on shear-induced particle migration , 2013 .

[54]  Jin-Keun Kim,et al.  Lubrication layer properties during concrete pumping , 2013 .

[55]  A. Gibb,et al.  Hardened properties of high-performance printing concrete , 2012 .

[56]  T. T. Le,et al.  Mix design and fresh properties for high-performance printing concrete , 2012 .

[57]  Richard A. Buswell,et al.  Developments in construction-scale additive manufacturing processes , 2012 .

[58]  Tor Arne Hammer,et al.  Flow conditions of fresh mortar and concrete in different pipes , 2009 .

[59]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .